BM5-V3WR.17.44.C19.B26
1. Added SONY focus tracking;
2. Added second-speed and third-speed of SONY LANC ZOOM;
3. Fixed the problem that KOMODO FPS did not display the fractional part, and related problems of disconnection/reconnection;
4. Added the operation of Focus can be continuously added and subtracted by long pressing;
5. Changed the default state of auto Color Calibration and Black Level to off;
6. Added "Camera Recording" option to the function list;
7. Changed the function name of "Image Crop" to "Rectangle Crop";
8. Modified the function of Gesture Zooming to make it independently work of Rectangle Crop. And you can only move the image with a single finger after the gesture is zoomed in;
9. Support display battery level (maximum 5 bars)
10. Added the option of menu display time on the system settings page;
11. Added Q1 and Q3 options to the BMPCC Bluetooth controller, and fixed the related problems of disconnection/reconnection/scanning;
12. Adjusted the layout of the WIFI control page of SONY ILCE-7SM3;
13. Add WIFI control option of V-Raptor.
BM5-V3WR.15.43.C18.B23
1. Added Focus button to the BMPCC Bluetooth controller page;
2. Added WIFI control for Sony A7S3, A7M3, A7S, A7M4, DSC-RXOM2, A9I, A9II, A7C, A1, FX3, RX10, RX0;
3. Fixed the problem that KOMODO Pre-Record cannot be enabled;
4. Added the setting option of "Detect data source" (after LUT/before LUT) in the system configuration page, supported function: Waveform, False color and Zebra;
5. Perfected the operation of the full-screen waveform function;
BM5WR_13_41_C18_B21:
Fix the problem that Tilta motor A B Position & REC cannot record.
BM5WR.13.41.C17.B21（BM5-V3WR.13.41.C17.B21）
1. Solve the problem of confliction between peaking focus function and guide frame, crosshair, and grid. Optimized to open new peaks and grids/guide boxes at the same time, peaking only grab the screen.
2. Add the peaking frame function (manually adjust the display range of the peak) and mask function (reducing the image outside the peak frame to 75% of the original image) for the focus assist function.
3. Modify the Zoom In function to the Image Crop function, which can be operated quickly through gestures.
4. On the operation page of the peaking frame and Image Crop, you can quickly resize the image with a single finger.
BM5WR.12.40.C16.B21
1. Fix the WiFi connection related problems.
2. Optimize the operation and display mode of Panasonic camera IRIS.
Tap: [<], the progress bar will decrease to the left, and the value will decrease.
Tap: [>], the progress bar will increase to the right, and the value will become larger.
3. Fix the problem that the exposure value of "EV" displays [--], when the exposure compensation (EV) is set to [AUTO] at ISO, the shooting mode of the camera is set to dynamic M mode.
4. Fix the problem of confusing data display by switching the camera's photo mode P/A/S/M/iA and shooting mode:
When switching from shooting mode to photo mode, it is not possible to take pictures, when switching from shooting mode P to shooting mode M, IRIS and SHUTTER cannot be controlled, and data is obtained.
5. Fix the problem that the KOMODO cannot be connected after the firmware is updated to 1.6.1.
6. Add Sony Wi-Fi identification device name, the SSID with "DIRECT", "ILCE" field can be recognized.
7. Increase the SS/Gain control of some Panasonic cameras.
1. Add Panasonic BS1H USB-C camera control.
2.Cancel the function of automatically turning on the peaking when touching the focus, and when the motor controls the focus.
1、Solved the problem that the waveform was not aligned after connecting the Sony A7M3 camera.
2、Solved the problem of white lines on the monitor screen when using SDI signal input after connecting to the KOMODO 6K camera.