On the Portkeys PT5, there are one HDMI input port and one HDMI output port. The monitor supports a maximum input resolution of DCI 4K at 24p, 4K UHD at up to 30p, and FullHD at up to 60p. I tested all three with a Canon EOS R and a Canon EOS C70 and did not have any issues, may it be on the input or output side. And this is the feeling you get, colors are not off, but you can make them better by adjusting the contrast a bit and the chroma/tint settings by plus or minus two/three. If you have an i1 Display Pro prob, you can even re-calibrate your LH5P yourself later down the road if needed.
The PortKeys Bluetooth Module for BM5 monitors retails for $119/99€, and you can pre-order it directly on PortKeys’ website. It should ship from the 30th of November. The Z CAM E2 follows the “brick” look – like the RED ecosystem – and you will need some accessories to make it work properly. Some third-party manufacturers have started to implement it in their development, like PortKeys with their BM5 that can control the camera.
One small cinema camera with a cage (Canon EOS C70). At the back of the PT5, there is a built-in Sony NP-F and Canon LP-E6 battery bracket.
I have tried this option in practice but quickly abandoned it for moving shots, as the motion blur (or partial lack thereof) of the resulting image looks weird. It may work for a static interview though, or a situation where the scene demands a higher shutter speed (1/200 and up). This feature is helpful for live streaming purposes, and according to VIDEOGEAR, there is “zero latency, and it supports video platforms like Skype, Facebook, YouTube, Twitch, Periscope, Zoom, and more.” Though I did not test that feature of the monitor.
At the top of the Flexloader L’s shoulder straps, the second adjustment is the “support,” or how far you want the straps to be from the actual bag. At the top of the Flexloader L’s shoulder straps, the second adjustment is the “support,” or how far you want the straps to be from the actual bag.
Dynamic Range of the Z Cam E2C Cinema Camera. Nikon Z 6 is the first full-frame mirrorless camera from Nikon – it is the “all-arounder” within the new Z system. It features 24.5MP CMOS sensor and can record UHD 4K video at up to 30fps and full HD at up to 120fps – all in H.264. The camera can also output RAW signal via HDMI, so this could be the perfect camera to use with the Ninja V to capture in ProRes RAW.
Any Smart 7 Monitor + Bolt 4K Monitor Module 750 TX connected to the camera with any necessary camera control cables. Another great addition is on the backside of the monitor. In fact, the new design includes a plate on the back of the screen to comfortably host a wireless video transmission system.
Next, I was curious to see the dynamic range of the Z Cam E2C (have a look here to see how we measure DR). Also, there is a 3.5mm headphone jack if your camera doesn’t have one or if you want to monitor your audio signal directly from the PT5, which works fine.
If that wasn’t enough, it also has recording capability and Bluetooth connectivity. Compatible with virtually every input and setup, it even allows you to control internal features like shutter speed and focus when used with certain camera models. On the exterior side, there are various buttons/controls to control your camera or adjust your settings. These controls include one customizable three-band switch, one focus wheel, one rec switch, and one nine-way joystick.
CVP Buy link: Canon EOS 5D Mark IV Camera Body €2,659.54 (Free BG-E20 Battery grip). There’s also a nice little pouch inside the bag, which is around 23 x 15 x 5cm/9 x 5,9 x 2in.
However, if we do some maths: the LEYE II draws around 3W max, a Canon LP-E6N battery has an 1800 mAh capacity and a 7.2V voltage, so you should get a little over 4 hours of runtime (V x Capacity / P = 7.2 x 1.8 / 3) with one battery, which is fantastic. The LEYE SDI will retail for $549/€500. It is already listed on our partners’ websites B&H and CVP, so it should be available very soon!.
As I mentioned previously, the PortKeys LH5P has one 1/4-20″ mounting point at the bottom. This is the monitor’s only mounting point, which is a bit of a letdown. I like to have multiple options for rigging a monitor to my camera, at least one on the left or right side and one at the bottom. There is nothing but an exhaust vent on the monitor’s right side, so I guess it would have been probably possible to put another mounting point here. Disclaimer: Let me first say that I am not a Manfrotto Ambassador. Like every other article on CineD, Manfrotto, or any other brand, did not pay me to write this article. However, the company sent me the product to review for free. This review is my unbiased opinion, as Manfrotto did not modify, influence, or give input about the article or video before its publication.
However, the original PortKeys LEYE had one major drawback: you need to power it externally. For example, suppose you have a small DSLR/mirrorless/cinema camera. In that case, you probably don’t want to unnecessarily rig your camera with V-Mount batteries or a power bank only to feed an EVF. As a bonus within this accessory kit you will also get the FTZ Mount adapter to use with exsiting Nikon F lenses, Sony 32GB XQD G Series memory card, and DSLR shoulder bag.
The PortKeys LH5P comes in a small box. When you open it, you’ll find a Pelican-style hard case. Although the LH5H is an “entry-level” monitor, it features tons of monitoring tools like its big brother, including.
Manfrotto PRO Light Flexloader L pockets and compartments. The monitor doesn’t have a built-in battery plate like the Zacuto Gratical HD. You can switch it on using an external battery through the 7-24V Lemo port. The OEYE-3G only draws around 7W.
There is also a nice Z CAM smartphone app available for IOS (Android still in a beta release), which connects to the camera’s wifi and allows access / display / change all settings as well as providing a full screen image preview with little latency. Sony RX100 III Camera Kit with Accessories – $150 Discount.
The screen itself is a WLED panel, which is a marketing term to say LED panel, so blacks should be nowhere near an OLED panel. We plan to add subsequent control to Sony FS5/FS7, Canon C200/C300 II, RED, and ARRI cameras. We even plan to add the Tilta Nucleus N/M wireless follow focus The user can update the monitor’s firmware via the USB port.
This cover also features all the mounting points: a built-in NATO rail and three 1/4″-20 mounting points with ARRI locking pins. What do you think of the PortKeys Bluetooth Module? Do you think it is useful for the BMPCC 4K/6K cameras? Do you already have the PortKeys BM5 monitor? Let us know in the comments!.
You probably got it; I’m not a huge fan of the monitor mount, it works ok, but it could be improved to make it perfect. The Portkeys BM5 III WR is available now for €517. When you order it, you’ll have to choose the correct control cable for your camera, if you want to control it wired.
The Z CAM E2 cinema camera is a great new addition to the line of micro four thirds cameras, and got so many things right in the first place – first and foremost the image (audio via the 3.5mm input leaves a lot to be desired though). However, I can ensure that these 15mm thick M-GUARD dividers are much slimmer than their predecessor.
Handles, shoulder straps and padding. The Portkeys PT5 is available now for $169/€150. Very few other monitors will offer you this many features at this price point, and I can only think of the FeelWorld F5 and Desview S5 to maybe compete with it.
Brightness, contrast, chroma, sharpness, tint. The Volta Kit is available now and includes the top handle, two batteries, a battery charger, and a NATO rail for €140.00. The monitor mount will cost you an additional €40.00. You can purchase an extra pack of Volta36 batteries for €50.00.
Framing tools: Check Field, Grids, Image Flip, Cross Hair. First of all, the two Allen screws are not imperial, which is arguably more often used in the filmmaking world; they are metric-standard. Next, the screws were so tight I thought I would break them before even using the monitor mount. I had to put the round piece in a vice to unscrew these two screws finally. That’s not cool, but everything is in place, so let’s install it on the top handle!.
You got it; I love when I’m working with and not against an on-camera monitor. A third-party monitor should feel like a natural addition to your rig and not an add-on that you don’t want to bring/mount on your camera. So when the new Z Cam E2C arrived I was curious to see if some of the strengths have trickled down to this very affordable model – the Z Cam E2C is currently listed at just 799 USD.
Waveform and Waveform SDI output. The PortKeys Universal Handle with the Z-Cam E2.
This year we decided to divide the Black friday deals into three posts, which we will publish in the next days before friday November 29. For a while now I have been following the development of micro four thirds cameras. To be specific, I bought my first one exactly 10 years ago, the Panasonic LUMIX GH1.
Sharpness, chroma, brightness, backlight, display flip, tint, color temperature adjustments. However, I was a bit worried about a possible short inside my camera bag between the batteries and whatever metal object they could hit. Volta Cinema told me that.
The waveform plot of our Xyla 21 stepchart shows about 11 stops (see figure 1). Using IMATEST to calculate the dynamic range I got a result of 10.8 stops at ISO 500, Z-LOG2 using ProRes HQ 4k DCI 23.98fps (at a signal to noise ratio of 2, 11.9 stops for SNR = 1, see figure 2). Indeed, the Flexloader L comes with a built-in TSA lock that allows you to securely close your bag when you’re commuting, for example.
PortKeys LH5P on the left, PortKeys LH5H on the right. The BM5 is PortKeys’ new 5-inch 1080P flagship field monitor. It features an HDMI and SDI input, and an SDI output with cross-conversion. In case you need to monitor your sound, a 3.5mm output jack is located on the left side. There is a USB port at the bottom of the monitor for future firmware upgrades.
The right side of the Portkeys PT5. Key features: 7-inch IPS display, 1920×1200, 16:10 aspect ratio, 500 nits, 1200:1 contrast ratio, 160° viewing angle, 4K 60fps HDMI input and output, Touchscreen , Sony NP-F battery plate on the back to host and power accessories, Support for 50 custom 3D LUTs, Camera power supply , 5V USB-C Power Supply, 4x 1/4”-20 threaded holes, 330g, 175x105x22mm.
Last but not least, the waist belt is inside the built-in pocket when you receive the bag. This is handy if you, like me, rarely use them. One thing I hate is to have a waist belt I don’t use swinging around. Also, the waist belt features a small mesh pocket with a zipper. Exposure tools: RGB and Luma Waveform, Zebra, False Color, Histogram.
Material Possession ltd, the company behind Volta Cinema, is a relatively new film industry player. The British company is run by Tudor Chirila, which first launched a non-successful crowdfunding campaign for the version of its Top Handle back in November 2019. On most on-camera monitors (the ones that are not OLED), if you crank up the brightness to its maximum setting, the display tends to lift the image’s black parts.
The PortKeys BM5 camera remote functions are compatible with the Z Cam E2, Sony/Canon/Panasonic cameras. Full list below. Also, Manfrotto put two thick rubber reinforcements/locking holes on the front and one on each side to create a tuck-away strap system.
In terms of input/output, you’ll find an HDMI input and HDMI output ports on the left side of the LH5H, as well as a 3.5mm jack output, but no SDI ports. The LH5H is an “entry-level” monitor, perfect for DSLR/Mirrorless camera users. If you need both HDMI and SDI ports, the BM5 II is more suited for you. Also, the PortKeys LH5H is made of plastic, not metal, with a weight of just 170g/0.37lbs. Yes, that’s right. Even the brand new Sony a7S III is included in this CVP special. The camera is supposed to start shipping in September 2020, but it already caused a lot of excitement.
The Manfrotto PRO Light Flexloader L is one of the biggest carry-on camera backpacks available on the market. In this review, we’ll take a look at the bag’s build quality, features, and how much gear it can hold. If you’re looking for one of the best solutions money can buy, let’s take a closer look at the Flexloader L!. The EVF is built with all aluminum construction and the OEYE-3G EVF weighs in at a very manageable 400 grams. Three custom user buttons are available and you can mount the EVF using the ARRI Rosette or two provided 1/4″ holes. There is also a headphone port on the back for monitoring audio.
So, who is this monitor for? I guess the Black Mini is perfect for YouTubers or content creators who are mostly shooting inside. Also, if you’re doing many live streaming events and need a fast/affordable program monitor, it could get the job done. The monitor mount came in two parts. The round piece’s screws had threadlocker which makes removing them really hard, but you have to do it to assemble the monitor mount together.
Also, it gets very very hot and is quite power hungry. I used the “low” setting for the internal fan to avoid picking up the sound on video. Using a stabilized lens is a must – as I did for the sample footage (the Olympus 12-100 F4 IS Pro lens).
First Komodo accessory is the GDU Komodo Monitor Mount priced at $79. The mount sits between the camera and a monitor and provides forward and back tilt. According to GDU, a tension bolt system keeps the hinge tight across the tilt range and prohibits loosening during use. Three New Z CAM E2 Cameras Introduced – 6K With Super 35 Sensor and 6K Plus 8K in Full Frame.
DJI Osmo Pocket is the smallest Osmo yet. It combines camera with a 3-axis gimbal and fits literally in the palm. The camera still offers up to 4K 60fps video recording. Make sure to watch and read our DJI Osmo Pocket review for more information. You can activate multiple monitoring tools simultaneously to help you, but you can’t decide where they’ll be on the screen. For example, the waveform and histogram will always be on the bottom right of the screen.
Buy link: Canon EOS R6 Bundle Was: €4.061,14 Now: €3.916,32 (Savings: €144,82). The Z CAM E2 features a micro 4/3″ WDR CMOS sensor (19mm x 13mm). There is a Micro Four-Thirds lens mount.
With these upcoming firmware updates, the Ninja V will be capable of recording ProRes RAW HQ/ProRes RAW at up to 4K60P from the HDMI port of the E2. According to Atomos, “additional frame rates will be added in the future.” Your footage will be recorded onto affordable AtomX SSD mini SATA drives in the Ninja V. For example, when a monitor’s colors are wildly inaccurate, it can happen that you see orange when you’re supposed to see yellow or red. It can affect how you set your camera’s white balance or exposure, for example.
The R6 is one of Canon’s two newly introduced mirrorless cameras. It is the lower-resolution more-affordable sibling to the Canon R5. It offers internal 4K60p video in 10-bit with no crop and with AF. If you already have a PortKeys monitor – including the BM5, BM5 II, HH7, HS7T, OEYE-3G – the company just released several firmware updates on its website. Here are the firmware update details.
As you can tell, there are many different ways to power it, which is nice. Also, the monitor only draws 6W of power, which means it should have fairly long battery life. The R5 is the other one of Canon’s two newly introduced mirrorless cameras. With its 45 MP full-frame sensor, it offers 8K30p RAW internal video recording as well as 4K60p in 10-bit – both with no crop and with AF.
To use a Canon LP-E6 battery, slide it to the left. To use a Sony NP-F battery, slide it to the right. That’s very smart, and I love it. The new monitor has a 7-inch touchscreen IPS display with a maximum resolution of 1920×1200. The 16:10 aspect ratio provides some extra vertical space for monitoring tools.
There is a 3.5mm headphone jack if your camera doesn’t have one or if you want to monitor your audio signal directly from the Black Mini. The preamp is a bit noisy, but it works. Back: a Sony NP-F/Canon LP-E6 battery plate and a battery release button.
I think that the can unleash its full potential if you’re shooting indoor. Also, if you’re usually doing live streamings or even professional-looking online meetings, it could be the perfect tool for you at a very reasonable price. Also, another thing that surprised me is that the NATO locking mechanism doesn’t have a spring inside. It means that when you unscrew it, the part that moves doesn’t follow the locking screw, and you might have to move it by hand. This is something minor and not a dealbreaker, but a small improvement that could be made in the next versions.
5″ Monitor Review – An Entry Level Monitor for $89. Also, the PortKeys Bluetooth Module adds support for Sony a7II/a7III/a7RIV/a9 cameras, and Tilta Nucleus-N/M follow focuses. Unfortunately, you will have to plug a cable from the monitor to your camera/follow focus to have access to these functions.
The same type of battery can be used for the Portkeys BM5 monitor as well which is a big plus, and I needed all the spare batteries for the monitor, as its power consumption was quite high. The comes in a compact cardboard box. Nothing exciting so far. Once you open it, everything is neatly packed, with no space wasted. It’s the kind of box that is impossible to re-pack once you’ve opened it and taken the products out. Interestingly enough, the monitor doesn’t come with a case to store it in.
FUJIFILM X-T4 Bundle – €112.82 Savings. This is a design choice, and after using it, I get why they did it that way. I would like to have the option to close it if I’m shooting in tough weather conditions. It would protect the handle and prevent dust/rain from getting in.
PortKeys BM5 Monitoring Functions. PT5 case on the left, BM5 III WR case on the right.