There are tiny grooves on the monitor itself, so both frames stay in place firmly.Beyond the listed tools you can also add up-to 30 selectable LUTs into the EVF.
We first reported about their Portkeys BM5 monitor in 2019, a 5-inch field monitor with SDI/HDMI input and output ports capable of controlling your camera. The company released an upgraded version, the PortKeys BM5 III WR, that boasts a bigger screen and a couple of new features.As I mentioned previously, the PortKeys LH5P has one 1/4-20″ mounting point at the bottom. This is the monitor’s only mounting point, which is a bit of a letdown. I like to have multiple options for rigging a monitor to my camera, at least one on the left or right side and one at the bottom. There is nothing but an exhaust vent on the monitor’s right side, so I guess it would have been probably possible to put another mounting point here.
We are looking for technical and non-technical writers with expertise in camera technology and film and video post production, as well as “soft” filmmaking topics of where filmmaking techniques are applied.The PortKeys HS7T has both HDMI and SDI inputs and outputs. Source: PortKeys.
Now Z CAM is introducing three new cameras. The E2 S6 (Super-35 6K camera with a choice of MFT, EF or PL mounts) and two full frame models, with 6K and 8K sensors. (E2 F6 and E2 F8 with a choice of EF and PL mounts).The idea behind the Volta Cinema Top Handle was born out of frustration. As Tudor told us:.
Fig.1: Waveform plot of the Z CAM E2 cinema camera at ISO500 using Z-LOG2 ProRes HQ – about 11 stops can be identified above the noise floor.Untouched (left) vs. tweaked (right) colors when applying the official Z-Log2 LUT to the Z Cam E2C footage. Skintones are yellowish, tweaks are needed (screenshot from Resolve).
Manfrotto PRO Light Flexloader L specifications.So, you have to rely on the camera’s focus peaking (displayed via HDMI to the monitor).
Sony a6500 Camera Body with Free Accessories Kit – $500 Discount.The F7 PRO is an HDMI-only monitor. The HDMI input and output support 4K signals up to 60fps.
The monitor has a contrast ratio of 1000:1, and the panel itself is 10-bit (8+2 FRC), so not “true” 10-bit. An 8+2 FRC panel is less expensive for manufacturers to produce, as it’s based on a “software trick” to simulate 10-bit on an 8-bit panel. I’m simplifying things here, but keep in mind that even some of the most expensive monitors from SmallHD or Atomos (except NEON) use the same technique. The Portkeys PT5 is passively cooled, so it does not have a built-in fan. Also, it means that the monitor doesn’t make any noise when it is on.
I think monitors like the Atomos Shinobi that retails for a $299 price tag ($100 cheaper), or even the AndyCine A6 Plus V2 do make a better comparison starting point. I worked on a table to compare all three models which you can find below.Among the people who got the first Komodo was Phil Holland and Philip Grossman. They both started posting first thoughts and answering questions about Komodo quite quickly. Phil Holland made a special thread on REDuser where he shares his findings on Komodo. Philip Grossman posted already several sample clips and comparisons with his RED Helium 8K on his Youtube channel.
Some tweaks to the footage are needed to make it look more pleasing – that was not the case with the sister model Z CAM E2 which offers very nice, out of the box colors using the same LUT’s.A good monitor is nothing without great monitoring tools. These tools allow you to judge your exposure, focus, white balance, and so on. This is useful to make creative decisions and adjust your camera settings.
B&H Buy link: FUJIFILM X-T30 Camera Body Kit with Accessories Was: $899.00 Now: $799.00 (Savings: $100.00).On the Portkeys PT5, there are one HDMI input port and one HDMI output port. The monitor supports a maximum input resolution of DCI 4K at 24p, 4K UHD at up to 30p, and FullHD at up to 60p. I tested all three with a Canon EOS R and a Canon EOS C70 and did not have any issues, may it be on the input or output side.
you have time to write between 2 and 25 articles per month (Lengths can vary.). Top: four customizable function keys, a power switch, and four buttons to access and navigate inside the menu.
The Manfrotto PRO Light Flexloader L is available now for $329.99/€227.35. It can seem like a fairly high price tag, but the price/feature ratio is incredible and you’ll probably have a hard time finding a more affordable solution that offers you better build quality, versatility, and reliability.PortKeys HS7T Metal Edition: power options.
The OEYE-3G EVF is upgradable through a USB port and includes many free software features right out of the gate such as:.RED Komodo Update – First Cameras Shipped, Footage Samples, Accessories.
The monitor is color-calibrated out of the PortKeys factory, but you can adjust various settings like sharpness, chroma, brightness, backlight, display flip, tint, color temperature adjustments.Furthermore, these high-quality metal zippers pull straps are not here for the flex.
On the night shots, I had to ramp up the ISO to 16000 – I think the results are still OK and usable.The Portkeys PT5 comes in a small box. Open it, and inside you’ll find a Pelican-style hard case.
E2-F8 FF: $5995 available in PL or EF mounts.Manfrotto PRO Light Flexloader L pockets and compartments.
Also, there are rubber pull straps at the end of some zippers that open “secondary” compartments.The Portkeys PT5 is available now for $169/€150. Very few other monitors will offer you this many features at this price point, and I can only think of the FeelWorld F5 and Desview S5 to maybe compete with it.
However, they also closed the door on other monitors who might want access to the latest features from Teradek. BlackMagic, Atomos, PortKeys, and others will have to find their own solutions. Canon EOS 1DX Mark II Camera Body – $500 Discount.
First and foremost the Z CAM facebook group is worth mentioning, the spirit of conversation is very good and people from Z CAM as well as visitors are helpful, including the CEO Kinson Loo who answers questions very often himself.The PortKeys KeyGrip has been shipping for a couple of months now, and filmmakers have been complaining about the lack of a power switch button. Indeed, there was no battery switch, which means the KeyGrip was draining power if you didn’t remove the batteries from the handle.
Next, I was curious to see the dynamic range of the Z Cam E2C (have a look here to see how we measure DR).The Z CAM E2 M4 is a new addition to the Z CAM line. It is basically the original Z CAM E2 without some functions in a new body and with a lower price tag. For more information about this interesting modular Micro Four Thirds camera, make sure to check my article from its launch. Besides the camera body, this bundle further includes the PortKeys BM5 MKII Monitor (which can control the camera) and Hawk-Woods DV-F990 Battery.
This red power button is next to the Function button – they’re the same size/feeling to easily mix them up. Building up muscle memory will be difficult and you’ll probably turn off your monitor multiple times trying to find that function button.Dynamic Range of the Z Cam E2C Cinema Camera.
Teradek 4K Monitor Module 750 TX – Monitor and Control at a Distance.The fan is quiet; you can hear it when you start the monitor because it’ll kick in at maximum fan speed for a second. But, once the monitor is on, you’ll have to put your hear next to the exhaust vent to notice it at low speed, and even an on-camera microphone would have a hard time catching it.
It is already compatible with the Z Cam E2, Sony/Canon/Panasonic cameras. But, PortKeys just introduced a new Bluetooth Module that pushes the capabilities of the BM5 a little further.In short, the display is not stellar by any means. But again, if you look at things with a price/performance ratio in mind, it’s definitely acceptable if you’re starting out after a few tweaks.
Via LANC: Z CAM E2 F6 and S6, Blackmagic Ursa Mini, Ursa Broadcast, Pocket Cinema Camera 4k/6K, Sony FS5, FS7, FX9, C700 PL, C700 GSPL, C200, C100, C100 MARK 2.The batteries are wrapped in a plastic housing that also feels secure and robust. Each battery has a “Volta 36” marking, which looks cool to me.
While the BM5 features every tool you need nowadays, this is not what caught my attention. What’s impressive is the “camera remote” port and the remote camera functionalities. Chinese manufacturer Portkeys is well-known for creating innovative on-camera monitors and viewfinders with very aggressive price/feature ratios. For example, they recently released the Portkeys BM5 III WR that can control the RED Komodo and is now RED Approved. Also, I reviewed their Portkeys LH5P monitor earlier this year, a monitor under $400 can control your camera.
The PortKeys Bluetooth Module for BM5 monitors retails for $119/99€, and you can pre-order it directly on PortKeys’ website. It should ship from the 30th of November.And now comes the fun part! Like its big brother the BM5 II, the PortKeys LH5H is capable of controlling your camera. Above is a list of all compatible cameras, and the features you can control via the LH5H.
Change your aperture, ISO, shutter, white balance settings.the height of the small dividers could be higher so small objects doesn’t move inside the bag.
Back: a Sony NP-F/Canon LP-E6 battery plate and a battery release button.I like that you can still put the TSA lock in its pocket even when your bag is secured. You probably don’t want to catch unnecessary attention by walking around the city with a lock hanging on the outside of your bag.
This can seem quite simple. However, to access these pages, you have to swipe the monitor in various directions to go to the desired page. For example, for the System page, you have to swipe left. For the function page, it’s a swipe on the right. The Control Settings page needs a swipe down and a swipe up for the motor page. It’s not easy to memorize, and there’s no visual indication of the page you’re currently in. But it doesn’t end there.Indeed, 1/4-20″ with locating pins mounting points are not “industry standard,” but 3/8-16″ with locating pins are. But, again, to me, Atomos did it right with their Ninja V/V+, and a lot of camera monitor manufacturers should follow the trend.
PortKeys LEYE EVF Announced – 4K HDMI Affordable Viewfinder.Function settings page where you’ll find all your monitoring tools.
If you swipe to the left or right, you can access the System settings page. This page is where you can adjust the display settings, audio output, LUT, firmware update, etc.The PortKeys Bluetooth Module for BM5 monitors retails for $119/99€, and you can pre-order it directly on PortKeys’ website. It should ship from the 30th of November.
Let’s be honest, this plastic sun hood will not get you very far, especially as one of the sides is open. It is hard to put inside the bracket, it barely fits, there are light leaks from all sides… So you have it, it’s not the best design in the world, but at least they give you something that can help a bit.I think the Black Mini has a tiny little fan on the inside that you can only hear if you put your ear at the back of the monitor. In short, you won’t hear it, and the monitor is 100% silent.
The currently retails at Amazon for $89 with by using this discount code at checkout: Y2DWYGBM. The special offer ends on October 5th,2021, at 23:59 PDT.PortKeys LH5H Released – Affordable 5″ Monitor That Can Control Your Camera.
This PortKeys BM5WR professional-grade monitor is the gold standard for outdoor shoots, with an insanely bright 2200-nit screen and a 1000:1 contrast rating. Those specs ensure flawless colors, and it comes equipped with a multitude of monitoring tools used for setting exposure. The LH5P has a built-in camera control module and can control various camera via a cable or wirelessly for BMPCC 4K/6K users. The LH5P can connect to your camera via a cable, and Z CAM, Canon, Sony, Panasonic, Blackmagic cameras are supported at the moment. In short, with the LH5P you can adjust your camera settings, trigger recording, and even pull focus without even touching your camera!.
On the , here are the built-in tools:.Phil also tested the Sensor Calibration (Black Shading) with the Komodo. Black Shading is basically a sensor and pixel check while generating a calibration map to counteract a sensor’s inherent fixed pattern noise. For RED DSMC2 cameras it was roughly 1 minute per “K” for calibration (8 minutes on RED Monstro 8K). RED Komodo 6K is faster in this regard – Sensor Calibration was done in less than 1.5 minutes.
Also, there is a 7/24V power input port on the left side of the monitor that you can use to power the Black Mini externally.On top of the LH5H, you’ll find four customizable function keys, a power switch, and four buttons to access and navigate inside the menu. At the bottom of the monitor, there is one camera control mini-USB port (more on that later) and a 5-pin motor camera control port that doubles up as a DC 7-24V power output port.
To power the camera, you can use Sony NP-F batteries or use the DC 12V 5A LEMO power port. Finally, there is an ethernet port for control/setting/live streaming, a Wifi antenna port, a USB port, and an HDMI output. Also, you have full camera control (including monitoring) through a phone application.Video Plugins are available for only $89 (Was $179). FilmConvert Nitrate Bundle is available for only $129 (Was $249). Sale runs from Monday November 25 until Cyber Monday, December 2.
B&H Buy link: DJI Osmo Action Was: $379.00 Now: $279.00 (Savings: $100.00).PortKeys LEYE II Viewfinder Introduced – Now with Built-In Battery Plate.
The user interface of the PortKeys LH5P is not its most significant strength, to say the least. When I purchase or review a product, I never read instructions (like most filmmakers, I am assuming), which means a product must be intuitive. I think you should be able to give a monitor to any camera assistant and everybody must be able to make it work without reading a book. That is not the case with the LH5P.The PortKeys OEYE-3G EVF next to a Panasonic GH4.
you actively come up with your own ideas.Fig. 2:IMATEST calculates 10.8 stops of dynamic range for the Z CAM E2 cinema camera at a signal to noise ratio of 2 for 4k DCI ISO500 ProRes recording using Z-LOG2 (1/SNR = 0.5, medium value in the upper right hand table).
PortKeys has just announced a new 5.5-inch field monitor: the PortKeys P6. This monitor features a 1080P display with a decent 500nit brightness and a 4K HDMI input plus a 4K HDMI output. Let’s take a closer look at it!.User interface and its challenges.
The Manfrotto PRO Light Flexloader L is a pretty simple camera bag with four main pockets and compartments:.Three “normal-sized” lenses and a big zoom lens (Canon EF 70-200mm F/2.8 L IS).
Also, it is a WLED display, and the panel itself is 10-bit (8+2 FRC), so not “true” 10-bit, even if very few monitors are real 10-bit.GDU Komodo Accessories. Source: GDU.
PortKeys HS7T front and back views. Source: PortKeys.Sony a7 III Camera Body with Accessory Kit – $200/€145 Discount.
If your monitor colors are incorrect, you won’t see your footage how it really is. For example, when a monitor’s colors are wildly inaccurate, you can see orange when you’re supposed to see yellow or red. It can affect how you’ll set your camera’s white balance or exposure, for example. There are several ways to attach tripods or light stands to the Flexloader.
Features of the Z Cam E2C Cinema Camera.Both the LH5H and LH5P has the same ergonomics and input-output ports:.
Most of the magic from the PortKeys Universal Handle happens on the inside. Indeed, it features a built-in Bluetooth and WiFi control module. In short, it means that the handle can connect wirelessly to your camera to control it. Below is a list of the settings and functions you can control via the Universal Handle.But best of all, if you get a pair the Teradek 4K Monitor Modules (one TX and at least one RX) and an ARRI camera (available now) or a RED camera (software update coming soon), you will be able to fully control the camera from your wireless monitor. This is a huge win for high-end drone pilots, shooters in remote locations, or DPs who just wants to drop their ISO or change ND from video village.
PortKeys HS7T with NATO clamp at the bottom. Source: PortKeys.FEELWORLD F7 PRO back view. Source: FEELWORLD.
While planning a trip to the Indian jungle to film a short documentary about Pench National Park, my colleagues at cinema5d challenged me to leave my standard gear at home and take the new cinema camera Z CAM E2 instead – would it be up to the task?.And this is the feeling you get, colors are not off, but you can make them better by adjusting the contrast a bit and the chroma/tint settings by plus or minus two/three. If you have an i1 Display Pro prob, you can even re-calibrate your LH5P yourself later down the road if needed.
Portkeys recently released a lightweight and very affordable 5″ on-camera monitor: the PT5. With a maximum brightness of 500 nits only, I was curious to see how this HDMI-only monitor performs. Here are my findings. Finally, there’s an HDMI input port on the right side, above the power inputs, that can take video signals of up to 4K30p. There is no video output port.
If that wasn’t enough, it also has recording capability and Bluetooth connectivity. Compatible with virtually every input and setup, it even allows you to control internal features like shutter speed and focus when used with certain camera models. According to VIDEOGEAR, the Black Mini draws less than 6W of power. To give you a rough idea, as these results can vary a lot depending on the age/state of your battery pack, I did a quick test with a fresh Canon LP-E6N battery pack (14Wh). I got away with a little more than 3 hours of battery life at the maximum backlight setting. These results are great, and it’s decent battery life for an on-camera monitor powered by a small battery.
Anamorphic de-squeeze options added: 1X, 1.33X, 1.42X, 1.5X, 1.66X, 1.85X, 2X, 2.35X, User (1.00X~3.00X).So is the Manfrotto PRO Light Flexloader L the perfect bag? There are only very few minor things that, to me, could be improved:.
The lock buckles have a different design from the “traditional” ones you can find everywhere, which usually break quickly. These Manfrotto lock buckles are smooth, and it looks like you only need to get the center part inside for it to engage. It’s hard to describe, but a picture is worth a thousand words.FEELWORLD F7 PRO wireless video transmission system.
The R5 is the other one of Canon’s two newly introduced mirrorless cameras. With its 45 MP full-frame sensor, it offers 8K30p RAW internal video recording as well as 4K60p in 10-bit – both with no crop and with AF.The concept of a handle that can power your camera is not new, with products like the Soonwell PH70. However, I’m not too fond of products that have built-in batteries. It means that once you run out of battery, you have no way to pop a fresh battery pack and continue shooting. It’s a no-go for me in professional shooting conditions.
Z CAM E2 is a very capable small cinema camera with the Micro four thirds camera mount. It can record in ProRes HQ 10-bit or 4K up to 120fps in H.265 internally. Take a look at our Z CAM E2 review. This bundle with the free PortKeys BM5 monitor and control cable (so the camera can be controlled from the monitor) looks really tempting. Additionaly, the CVP price even without discount is better when compared to other european distributors.Also, another thing that surprised me is that the NATO locking mechanism doesn’t have a spring inside. It means that when you unscrew it, the part that moves doesn’t follow the locking screw, and you might have to move it by hand. This is something minor and not a dealbreaker, but a small improvement that could be made in the next versions.
Panasonic LUMIX G80/G85 Camera with 12-60mm Lens and Accessories Set – $300/€83 Discount Plus Free LUMIX 25mm f/1.7 Lens, Free 3-Year Warranty. The menu itself is straightforward and well structured, also custom presents for the function buttons are available. However, some of the settings require deeper dives (changing the frame rate for example), hence doing that in the heat of the action does not work so well.
The PortKeys LH5H is available now for $299.00. At this price-point, and with so many features, this is one of the most affordable daylight-viewable monitor that I can think of.As I mentioned, the Portkeys PT5 does not have any physical buttons, and all the navigation is via the touchscreen. I’m glad there are only pages, as it is relatively easy to operate and understand, but there are also some drawbacks like the numerous fingerprints the screen will accumulate.
Canon EOS C500 Mark II Bundle – €523,70 Savings.What matters to become a CineD writer:.
Have you worked with the Z CAM E2? What are your experiences with this camera? Please share your thoughts in the comments below.The lock buckles have a different design from the “traditional” ones you can find everywhere, which usually break quickly. These Manfrotto lock buckles are smooth, and it looks like you only need to get the center part inside for it to engage. It’s hard to describe, but a picture is worth a thousand words.
I would say that it’s a nice and beautiful product that works as advertised, but there is a lot of room for improvements to make the user experience more “reassuring” and enjoyable.A Sony NP-F-style battery powers it. Also, there is a power input/output port so you can power it off a V-Mount/Gold Mount battery or use the monitor to power your camera.
However, the sun hood blocks the sunlight pretty effectively, there are minor light leaks on the edges, and it’s quick to set up. It’s definitely nice to have it in the package!.Disclaimer: As usual, let me first say that I am not a Portkeys Ambassador. Like every other article on CineD, Portkeys, or any other brand, did not pay us to write this article. However, the company sent us the product to review for free. This review is my unbiased opinion as Portkeys did not modify, influence, or give input about the article before its publication.
If you have never heard of VIDEOGEAR, don’t worry, because neither did I prior to testing their monitor. Also, there is very little information on this company on the Internet as they don’t even seem to have a website or utilize social media. The company only sells its product on various marketplaces such as Amazon.CVP Buy link: Panasonic LUMIX G9 Camera Body Was: €1,100.86 Now: €941.78 (Savings: €159.09, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).
The HS7T can be powered by two hot-swappable Sony L-Series batteries or via the 4-pin LEMO input (DC 7.4~24V). Moreover, the monitor can supply power for any wireless video transmission system attached to the back: a helpful feature when trying to keep the monitor setup clean and compact.The BM5 III WR is now a little bit bigger than its predecessor, with a 5.5″ display compared to the previous 5.2″ one. Also, the monitor features built-in monitoring tools, including:.
On most on-camera monitors (the ones that are not OLED), if you crank up the brightness to its maximum setting, the display tends to lift the image’s black parts.The Z CAM E2 uses a dual ISO sensor, so I also tested the second gain value of ISO 2500 and got a result of 10.4 stops (SNR = 2).
It means that you’ll have a hard time trying to calibrate it correctly by hand with only a few built-in picture adjustment tools at your disposal in the menu system. In short, on-camera monitors must be as good as possible out of the box with minimal color adjustments needed by the end-user.We are using a new test method based on a high frequency, quartz & microcontroller based strobe light at 300Hz. As the sensor readout happens from the top to the bottom, we are getting a sequence of black and white bars from the strobe.
Disclaimer: As usual, let me first say that I am not representing Volta Cinema in any way. Like with all our unbiased CineD reviews, Volta Cinema, or any other brand, did not pay me to write this article. However, the company sent me the product to review for free. This review is my unbiased opinion, as Volta Cinema did not modify, influence, or gave input about the article before its publication.CVP Buy link: Sony a7R III Camera Body Was: €2,435.93 Now: €2,240.98 (Savings: €194.95 – CashBack).
Also, there are a couple of strange things in the UI. For example, you can’t activate an aspect marker and the grid simultaneously since they’re on the same page, so you’ll have to choose between one of them at a time. The same goes for the waveform; you can’t activate the RGB and Luma waveform simultaneously. This is a bit weird, but you can get used to it.As you can see, the PortKeys LH5P represents a good value for money compared to other monitors in the same price range, but it will be up to you to decide if it ticks all the boxes for your needs.
Powering options and battery life.Disclaimer: As usual, let me first say that I am not a VideoGear Ambassador. Like every other article on CineD, VideoGear, or any other brand, did not pay us to write this article. However, the company approached and sent us the product to review for free.
Once in place, it works nicely, but I had issues getting it in. Indeed, it came in two pieces in the box: the round part that slides in the handle and the piece that attaches to your monitor. I had to unscrew the two screws on the round piece to assemble the monitor as one piece like it should be.Once you switch the power button on, the monitor takes around five seconds to boot up until it is operational.
Now let’s take a quick tour of the monitor:.Also, there is a 3.5mm headphone jack if your camera doesn’t have one, or if you want to monitor your audio signal directly from the LH5H, which works fine.
proficiency in filmmaking – you know your stuff in one or more areas of filmmaking (producing, editing, directing, cinematography, post-production …).PortKeys has just released a new electronic viewfinder for DSLR/Mirrorless camera shooters with only one HDMI input that can take a 4K video signal: the PortKeys LEYE. This very compact EVF fills a hole in the market with an affordable price tag of $399. Let’s take a closer look at it!.
And an expandable gimbal pocket that opens in two steps: first, unlock the zippers all around the bag. Then, extend your bag to reveal the full-size gimbal pocket. This pocket is initially designed to fit a Manfrotto gimbal, like their 300XM modular gimbal.The Z CAM E2 is a very compact and lightweight cinema camera that we discovered during NAB 2018. Here is a quick summary of the features and what this small camera is capable of:.
The Function button is next to the red power button.In theory, this combo should work very well. The Portkeys BM5 monitor (for detailed specs see our article here) is a 5” FHD monitor which allows via a separate cable to display and change settings in the camera’s menu on the touchscreen – on our early prototype this didn’t work though and a newer firmware wasn’t yet available.
News, reviews, tutorials, how-to’s, you name it – CineD.com is a leading force in the filmmaking tech world and we are forever and always in need of knowledgable team members who also enjoy to write about their passion.Also, the PortKeys Bluetooth Module adds support for Sony a7II/a7III/a7RIV/a9 cameras, and Tilta Nucleus-N/M follow focuses. Unfortunately, you will have to plug a cable from the monitor to your camera/follow focus to have access to these functions.
For sound, I took a Sennheiser MKE 440 with me, using the 3.5mm audio input on the Z CAM E2 – mounted to the side, which was not ideal. Also, the recorded sound quality via the 3.5mm input leaves a lot to be desired. I hope Z CAM can improve on the audio part in the future.The FEELWORLD F7 PRO is an HDMI-only monitor. Source: FEELWORLD.
Unfortunately, we had no cage available for the Z CAM, but the camera has various ¼” mounting points on top, bottom and on the sides. In conjunction with the Z CAM E2 I used an early prototype of the Portkeys BM5 monitor mounted with a magic arm, see the image below (the released version is black, the prototype had an anodized green surface finish). B&H Buy link: Canon EOS 5D Mark IV Camera Body with Accessories Kit Was: $3,105.24 Now: $2,499.00 (Savings: $606.24).
Also, once the image looks acceptable, you can start seeing that the display doesn’t have a high density of pixel: 441ppi, according to the manufacturer. If you’re pixel peeping, you can see individual pixels on the screen. As I already mentioned, the screen is hard to see if you’re shooting outdoor. But, on a cloudy day, it can get the job done with the included sun hood.
In short, the display is not stellar by any means. But again, if you look at things with a price/performance ratio in mind, it’s definitely acceptable if you’re starting out after a few tweaks.Then, you can clip the sun hood in the brackets, and you’re ready to go. The quality of this sun hood is okay, but I’m not sure it will last very long, and you’ll have to be careful with it.
Bottom: one 1/4-20″ mounting point with exhaust vents.RED Komodo and Monstro size comparison. Image Credit: Phil Holland.
When it comes to the E2, the added benefit of this connection, is the ability to record ProRes RAW directly on the Atomos Ninja V. (At this stage, there is no word from Atomos if ProRes RAW recording will be implemented on other members of the E2 family of cameras).When the battery compartment is open, all you have to do is align the stickers (if they are still here) of the battery and handle and push the battery inside. Jokes aside, even without the stickers, you can’t go wrong when you get used to the product. Put the connectors of the battery down, and there you go.
More then two years after its initial announcement, Panasonic GH5 still remains among the most popular Micro four thirds cameras for filmmakers. Its current price makes it even more affordable. Additionaly, B&H offers it with free memory card, spare battery, and camera bag.This product demonstrates the advantages of a semi-closed ecosystem. The Vitec Group has, over the years, picked up SmallHD, Teradek, and even Amimon – the company that manufactures the wireless chips underlying them all. By bringing all of these companies under one umbrella, Vitec opened the door to collaborative products like the Teradek 4K Monitor Module family.
Zoom, Peaking, Framing guides, Grids, Aspects, Anamorphic de-squeeze.A top handle to power your camera and accessories.
The Volta Cinema Top Handle is the company’s first product, designed with a simple goal in mind: create a top handle that can power camera accessories or even your camera via a D-Tap port. I had the chance to play with it for one month, and here are my findings.Two little pins inside the handle make the connection between the battery and the D-Tap port. These pins slide back and forth inside the groove when you adjust the handle back and forth.
tell us who you are, what you do, what you enjoy writing about most – and why you think this is something for you.Color Science of the Z Cam E2C Cinema Camera.
Buy link: Canon EOS 1DX Mark III Bundle Was: €9.620,00 Now: €9.138,19 (Savings: €481,91).Z Cam E2C cinema camera rigged up with a monitor (Portkeys BM5) and a ZOOM H2 (not visible, behind the monitor) for audio capture via the 3.5mm input.
You can navigate inside the menu via the touchscreen or the buttons at the top of the Black Mini. At first glance, the user interface looks a bit outdated, but in the end, it is straightforward to navigate inside and find what you’re looking for.EOS R’s smaller brother – the EOS RP – is now also on sale during Black friday. As a bonus within this accessory kit on B&H you will get a SanDisk 32GB SDHC memory card, and a shoulder bag.
The first batch of both accessories got sold out relatively quickly, the next batch should be shipping by the end of June.The display has a resolution of 1920 x 1080. It is a touchscreen with a maximum brightness of 2200nits and a contrast ratio of 1000:1.
There are two little charging indicators on top of the Volta36 battery charger that goes from red (charging) to green (charged).Using a stabilized lens is a must – as I did for the sample footage (the Olympus 12-100 F4 IS Pro lens).
If you are tempted by the price to use it as a cinema camera be aware that the rolling shutter means that you cannot shoot handheld footage without a stabilized lens. It’s an absolute must in that scenario.Judging the brightness, color accuracy, or Delta E of the Portkeys LH5P with a spectrophotometer did not make a lot of sense. Indeed, numbers are just what they are: numbers. I prefer to judge a product by its feeling and the overall perception of an image.
One handy optional accessory and nearly a must-have with the Volta Cinema Top Handle is the monitor mount. This piece, like the rest of the top handle, is made out of metal.On most on-camera monitors (the ones that are not OLED), if you crank up the brightness to its maximum setting, the display tends to lift the image’s black parts.
Monitor manufacturer FEELWORLD has just released a new affordable 7-inch monitor, featuring a Sony NP-F style battery plate on the back to host and power a wireless video transmission system. Built on the legacy of the original F7 monitor, the FEELWORLD F7 PRO is now available for $239. Sony a7S II Camera Body with Free Storage Kit – $440/€195 Discount.
The Volta36 battery charger has two charging indicators.I used the Volta Cinema Top Handle during seven full productions days, it held all its promises, and it’s been a joy to use. It’s a nine out of ten usability score for me, because the one thing that I am missing is a battery indicator on the handle to see the battery state with a push of a button.
The EVF is built with all aluminum construction and the OEYE-3G EVF weighs in at a very manageable 400 grams. Three custom user buttons are available and you can mount the EVF using the ARRI Rosette or two provided 1/4″ holes. There is also a headphone port on the back for monitoring audio.Once you switch the power button on, the monitor takes around ten seconds until it is operational, which is acceptable.
One full-size HDMI to mini-HDMI cable.The BM5 is PortKeys’ new 5-inch 1080P flagship field monitor. It features an HDMI and SDI input, and an SDI output with cross-conversion. In case you need to monitor your sound, a 3.5mm output jack is located on the left side. There is a USB port at the bottom of the monitor for future firmware upgrades.
The PortKeys BM5 top and bottom. The remote camera socket is located at the left of the USB port.The HDMI ports are located on the left side of the monitor. There’s also a 3.5mm headphone jack in the middle of the ports.
CVP Buy link: Canon EOS 800D Camera with 18-55mm lens Was: €682.12 Now: €555.26 (Savings: €126.86 – Cashback).If you’re often shooting outside you should probably not consider this monitor as the screen is tough to see if you’re shooting outdoor. Also, even on a cloudy day, the included sun hood has its limits.
The BM5 is PortKeys’ new 5-inch 1080P flagship field monitor. It features an HDMI and SDI input, and an SDI output with cross-conversion. In case you need to monitor your sound, a 3.5mm output jack is located on the left side. There is a USB port at the bottom of the monitor for future firmware upgrades.CineD has become one of the most successful video camera gear reviews & news websites in the world over the past decade, and we are only getting started. We need more CineD writers.
Top Black Friday Deals for Filmmakers – Part 1: Cameras, FilmConvert, MZed.write one representative news post about a current subject of your own choosing that you would consider a “perfect fit” for our site (and which we haven’t written about yet). It can be either a classic news post of something current (example here), a review (like here) or a longer educational post (like here). Choosing the right subject and headline is almost as important as the proper content to go with it :-).
Yes, that’s right. Even the brand new Sony a7S III is included in this CVP special. The camera is supposed to start shipping in September 2020, but it already caused a lot of excitement.The monitor has a contrast ratio of 1000:1, and I could not confirm if the panel itself is 8 or 10-bit (8+2 FRC obviously if it’s the case). According to VIDEOGEAR, the display covers 131% of the Rec.709 color space and 98% of DCI-P3. On top of that, the panel would support HDR ST2084 300 / ST 2084 1000 / ST 2084 10000 / HLG monitoring, but I have high doubts about it and can’t confirm.
Home
Community
☰
