In terms of heat, I found that even after a one-hour runtime at maximum brightness, it was slightly warm to the touch but not hot. The plastic housing helps with heat dissipation, as there are no air intakes/outtakes around the monitor’s body. What and who are we looking for?.
A monitor of this size and weight makes a lot of sense to use with a small and lightweight battery, like a Canon LP-E6 pack (around 50g). With the battery mounted, the total weight of your setup is about 250g, which is not massive on top of your camera rig. CVP Buy link: Panasonic LUMIX G80 Camera with 12-60mm Lens Was: €609.02 Now: €525.88 (Savings: €83.14, Free 25mm f/1.7 lens, and Free 3-year warranty).
According to the company, they had to use “an off the shelf 0.8A x1 or 0.6A x 2 PCB for the charger to sit within the Micro USB specification (2.1A x 5V = ~10W total, minus the loss in efficiency).” This results in long charging times. To fully charge two batteries, it took me close to eight hours. CVP Buy link: Panasonic LUMIX GH5 Camera Body Was: €1,182.68 Now: €967.65 (Savings: €215.03, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).
Indeed, a great on-camera monitor must be as color accurate as possible and be as close to “what you see is what you get” as possible. If your monitor colors are not correct, you won’t see your footage the way it’s supposed to be. For example, when a monitor’s colors are wildly inaccurate, you can see orange when you’re supposed to see yellow or red. It can affect how you’ll set your camera’s white balance or exposure, for example. First and foremost the Z CAM facebook group is worth mentioning, the spirit of conversation is very good and people from Z CAM as well as visitors are helpful, including the CEO Kinson Loo who answers questions very often himself.
Atomos Announces 12-Bit Apple ProRes RAW Support For Z CAM E2 Camera. The Volta Cinema Top Handle is the company’s first product, designed with a simple goal in mind: create a top handle that can power camera accessories or even your camera via a D-Tap port. I had the chance to play with it for one month, and here are my findings.
The PortKeys LH5P features a 5.5″ WLED display with a FullHD 1080p / 1920 x 1080 resolution. The display is a touchscreen that you can use to navigate through the menus (more on that later). Currently, with the pre-release models, available resolutions and frame rates are.
In short, the PortKeys LH5P has plenty of input/output power ports, which is nice, as some much more expensive options out there don’t offer that much. Crosshair, framing guides, grids, aspects.
In total, there are four ways to power the Portkeys PT5, which is quite impressive for an entry-level product. Now PortKeys is introducing a brand new solution to the EVF market called the OEYE-3G EVF.
Given the value of 36 ms, I was wondering how it can do 29.98fps at 4K – I measured the rolling shutter at 29.98fps and got a result of 31.3 ms interestingly. So obviously the readout speed changes with the different modes. Material Possession ltd, the company behind Volta Cinema, is a relatively new film industry player. The British company is run by Tudor Chirila, which first launched a non-successful crowdfunding campaign for the version of its Top Handle back in November 2019.
FEELWORLD F7 PRO wireless video transmission system. The D-Tap output port of the Volta Cinema Top Handle can give you 7.2V with a maximum load of 5A. The company has a full compatibility list on its website.
A good monitor is nothing without great monitoring tools. These tools allow you to judge your exposure, focus, white balance, and so on. This is useful so you can make creative decisions and adjust your camera settings. Three “normal-sized” lenses and a big zoom lens (Canon EF 70-200mm F/2.8 L IS).
A few iterations later, after much trial and error, testing, and sleepless nights, my vision came full circle and the handle was launched in August. Since then, the product has seen some solid improvements, including the custom pins (found inside the handle) which can now ensure 5A output, and the custom cabling for the batteries which reduced the internal resistance resulting in minimal heat output and longer recording times. When you power on the monitor, it’ll display your image, but nothing else. If you swipe up/down on the left side of the screen, you can quickly adjust your brightness setting. On the other hand, if you swipe up/down on the right side of the display, it’ll change your audio output level. Now, if you swipe up in the middle of the screen, it’ll show you the menu. Also, you can access the menu by simply pressing the menu button.
Open it again, and inside the hard case you’ll find. The PortKeys LH5H is in-factory calibrated using an X-Rite i1 Display Pro colorimeter. The display should look as good as it can be right out of the box without further adjustments. If you have an i1 Display Pro prob, you can re-calibrate your LH5H yourself later down the road if needed.
When the PT5 is up and running, you can adjust various display settings inside the menu, including. Two little pins inside the handle make the connection between the battery and the D-Tap port. These pins slide back and forth inside the groove when you adjust the handle back and forth.
Sony a7R III Camera Body with Free Accessories Kit – $300/€195 Discount. A good monitor is nothing without great monitoring tools. These tools allow you to judge your exposure, focus, white balance, and so on. This is useful so you can make creative decisions and adjust your camera settings. On the PortKeys LH5P, here are the built-in tools.
Bottom: one camera control mini-USB port, a 5-pin motor camera control port that doubles up as a DC 7-24V power output port. There’s also a 1/4-20″ mounting thread and a USB Type-A port to update the firmware of the LH5P, load your LUTs, or power it. To make it short, all you have to do is purchase the right cable for your camera with the monitor – also available separately – and plug it from the LH5H to the camera. Then, you’ll be able to trigger the recording, navigate through the menus of the camera, change your settings, and so on.
Dynamic Range of the Z Cam E2C Cinema Camera. Back: the Sony NP-F/Canon LP-E6 battery plate and a battery release button.
Also, Atomos announced the development of a touch-screen camera control on the Ninja V for ALL Z CAM cameras. This control function is similar to what the PortKeys BM5 can already do. To use a Canon LP-E6 battery, slide it to the left. To use a Sony NP-F battery, slide it to the right. That’s very smart, and I love it.
The Z CAM E2 uses a dual ISO sensor, so I also tested the second gain value of ISO 2500 and got a result of 10.4 stops (SNR = 2). The sweeping images we see on movie screen are first visualized by looking through a camera, but the second step before anything rolls is to view them through a larger monitor.
Let’s be clear, this new Portkeys BM5 III WR is not a massive upgrade over its predecessor, and most of the main features are the same, including. These tools are pretty much everything you need to judge the image on an on-camera monitor.
The Volta Cinema Top Handle design is pretty “simple,” minimalistic, and I like its elegance. It consist of two main parts: the handle that doubles as the battery compartment, and a mount with the NATO rail and D-Tap port. B&H Buy link: Panasonic LUMIX GH5 Camera Body with accessories set Was: $1,997.99 Now: $1,297.99 (Savings: $700.00).
The loupe of the LEYE II features a +8 to -3 diopters adjustment. On most on-camera monitors (the ones that are not OLED), if you crank up the brightness to its maximum setting, the display tends to lift the image’s black parts. In short, blacks are not black anymore, but more on the grey side, and the picture becomes a little washed out.
Special Camera Deals from CVP for CineD Relaunch. If you remove the pouch that comes with the bag, you can put a monitor – in this picture, the PortKeys PT5 that I reviewed here – and some SSD hard drives.
One small cinema camera with a cage (Canon EOS C70). Buy link: Nikon Z 6 with FTZ Mount Adapter and Bag Kit Was: $2,243.90 Now: $1,696.95 (Savings: $546.95).
First of all, the two Allen screws are not imperial, which is arguably more often used in the filmmaking world; they are metric-standard. Next, the screws were so tight I thought I would break them before even using the monitor mount. I had to put the round piece in a vice to unscrew these two screws finally. That’s not cool, but everything is in place, so let’s install it on the top handle!. In short, these new dividers take less space inside your bag, so you have more room to store camera equipment.
Optimize the camera control interface and functions: improve the aperture display accuracy of BMPCC4K/6K. Fixes an issue where the BMPCC 4K resolution cannot be switched to 4K 2.4:1 4096×1720. We are Hiring New Writers – Apply Today!.
There is a little built-in screen on top of the camera but no “proper” display. You need to add your monitor via the HDMI/SDI ports. Indeed, the Volta36 batteries are 36Wh/5A batteries; that’s a lot of juice in such a small package. In the graph above, you can see the capacity to weight ratio compared to other battery solutions.
The Manfrotto PRO Light Flexloader L’s design is sober; it’s light black with a couple of “Manfrotto signature red” touches here and there. If you already have a PortKeys monitor – including the BM5, BM5 II, HH7, HS7T, OEYE-3G – the company just released several firmware updates on its website. Here are the firmware update details.
By shopping at our partners’ stores, you are supporting cinema5D through our buy links, as we get a small affiliate commission when a purchase is completed. What do you think of this new PortKeys OEYE-3G EVF? Do you already use an EVF with your camera? Let us know in the comments down below!.
A lot has been written about the FUJIFILM X-T3, and a lot of it here, on cinema5D. We’ve reviewed the camera (twice), and crowned it our best mirrorless camera of the year 2018. Currently, there is a nice discount on this camera in both B&H (including free accessories – memory card and bag) and CVP. The PortKeys BM5 is daylight-viewable with a maximum brightness of 2000nit – the newest BM5 II monitor is 2200nit – and it is entirely made out of aluminum for a total weight of 350 grams.
Canon EOS C300 Mark III Bundle – €521,27 Savings. If your monitor colors are incorrect, you won’t see your footage how it really is. For example, when a monitor’s colors are wildly inaccurate, you can see orange when you’re supposed to see yellow or red. It can affect how you’ll set your camera’s white balance or exposure, for example.
Like all PortKeys products, the LEYE features all the monitoring tools you need, including;. PortKeys LEYE II Viewfinder Introduced – Now with Built-In Battery Plate.
You got it; everything you’d expect is here. This cover also features all the mounting points: a built-in NATO rail and three 1/4″-20 mounting points with ARRI locking pins.
If you click on each tool in the menu, you can turn it on/off and adjust its settings. For each tool, you have various settings, including color, strength, magnification ratio, and so on. The FEELWORLD F7 PRO can host a wireless video transmission system on the back. Source: FEELWORLD.
B&H Buy link: Panasonic LUMIX G85 Camera with 12-60mm Lens and accessories set Was: $997.99 Now: $697.99 (Savings: $300.00). The Portkeys BM5 III WR is available now for €517. When you order it, you’ll have to choose the correct control cable for your camera, if you want to control it wired.
Cine 7 monitor + Bolt 4K Monitor Module 750 TX connected to the camera with ARRI license installed (If you are using 2 Cine 7 monitors you can have the license installed on either one.). Via LANC: Z CAM E2 F6 and S6, Blackmagic Ursa Mini, Ursa Broadcast, Pocket Cinema Camera 4k/6K, Sony FS5, FS7, FX9, C700 PL, C700 GSPL, C200, C100, C100 MARK 2.
Anamorphic de-squeeze options added: 1X, 1.33X, 1.42X, 1.5X, 1.66X, 1.85X, 2X, 2.35X, User (1.00X~3.00X). The HDMI cable is relatively thick, and while I prefer slim cables, VIDEOGEAR at least provides you with a way to connect the monitor to a camera.
Regarding power, the BM5 uses a single Sony NP-F style battery. Like the SmallHD Focus monitor, you can use the power output of the BM5 to feed your camera via a dummy battery. On top of that, you have the option to power the monitor with an external battery by using the Lemo port on the monitor, and the included Lemo to D-Tap cable. On the Portkeys PT5, here are the built-in tools.
At NAB 2018, we already had a chance to take a look at the original Z CAM E2. In case you are not familiar with this compact camera, it is built around a Micro Four Thirds mount and sensor with 10-bit color support, 13 stops of Dynamic Range (16 stops when set to WDR) and can shoot in 4K DCI at up to 120 frames per second. The OEYE-3G EVF is upgradable through a USB port and includes many free software features right out of the gate such as.
In terms of weight, the monitor is 250 grams/8.8 oz without batteries. External dimensions are 144 x 114.8 x 28mm/5.5 x 4.3 x 0.7in without battery. Comparing the LH5P to some of its competitors, like the smallHD FOCUS 5, the PortKeys monitor is slightly heavier. However, with dimensions of 133 x 84 x 19mm/5.25 x 3.3 x 0.75in, Focus 5 is overall smaller, but it is 5″ vs. 5.5″. Manfrotto PRO Light Flexloader L specifications.
Manfrotto PRO Light Flexloader L pockets and compartments. RED Komodo is the new Super 35 6K cinema camera that features a very small form factor. RED shipped out the first batch of custom-colored pre-release cameras in Grossman Gold color. The first hands-on tests and sample footage from Komodo users as well as first accessories are appearing.
Attaching an external monitor gives a closer approximation of how each shot will translate to the big screen, and as an added bonus, other people on set can watch the footage take shape. Next, I was curious to see the dynamic range of the Z Cam E2C (have a look here to see how we measure DR).
Finally, on the top are three user-customizable buttons, a menu dial, and an exit button to control the EVF. Ideally you come from the filmmaking industry, have a technical mind and are interested in nerding out about new camera gear, fuzzing over things that matter to filmmakers and content creators alike, and have a talent and lust for writing.
RGB and Luma waveforms, histogram, false-color and zebra. When it comes to storing, transporting, or flying with film equipment, I think the creative world is divided into two categories: those who don’t care and those who are obsessively looking for an even better solution. Needless to say, I fall in the second category.
A Postcard from Hallstatt – Z CAM E2C Cinema Camera Review. I did a quick test with a DJI Ronin RSC2 that barely fits inside this pocket.
Brightness, contrast, saturation, tint, sharpness, color temperature. Canon EOS R6 Bundle – €144,82 Savings.
Finally, there’s a 5-pin “aviation” power input/output port, as PortKeys calls it. You can use the included D-Tap to 5-pin power cable to power your monitor from a V-Mount/Gold Mount battery. Also, you could use the included 5-pin to barrel connector cable to power accessories, but I did not try it. According to the company, this port can feed a 7.4V camera accessory if you power the monitor with a Sony NP-F battery. The Portkeys PT5 features all the monitoring you expect from a monitor in 2021, including.
FEELWORLD F7 PRO back view. Source: FEELWORLD. Let’s be honest, this plastic sun hood will not get you very far, especially as one of the sides is open. It is hard to put inside the bracket, it barely fits, there are light leaks from all sides… So you have it, it’s not the best design in the world, but at least they give you something that can help a bit.
Left side: one HDMI input port, one HDMI output port, and a 3.5mm headphone jack. The Portkeys PT5 LH5P features a 5″ WLED display with a FullHD 1080p / 1920 x 1080 resolution. The display is a touchscreen and the only way to navigate inside the menus.
The battery charger has a micro-USB port, and I was a bit surprised that no charging cable was included. I reached to the company that told me. The Volta Cinema Top Handle attaches to your camera or rig via a NATO rail. The handle comes with an extra piece of rail and two 1/4″-20 mounting screws if you don’t have one.
Home
Community
☰
