A 2.4-inch display with a 1440 x 900 resolution. The display has a maximum brightness of 300 nits.You can download all firmware updates on PortKeys’ website here.
As you can see, you need a cable to connect the handle to some cameras. Otherwise, if you are a Blackmagic Design Pocket Cinema Camera 4k/6K user, you can wirelessly control/adjust:.PortKeys LH5P On-Camera Monitor Announced.
At the back of the PT5, there is a built-in Sony NP-F and Canon LP-E6 battery bracket.The loupe of the LEYE II features a +8 to -3 diopters adjustment.
Ahead of NAB 2019, Chinese company Z CAM has announced three new versions of their Z CAM E2 camera, with S35 and Full Frame 6/8K sensors. Now during the show, we had a chance to talk to Kinson Loo from Z CAM and hear more about what to expect. Let’s take a look at this upgrade!. As Jarred said, RED shipped the first batch of pre-stormtrooper Komodos in custom colors to few lucky customers. The first color seems orange to me, but RED calls it “Grossman Gold”. Every batch of these pre-release cameras that get shipped out will have a different color. It seems like the next one will be yellow.
Who is this monitor for? I think it can be a fantastic addition to your kit if you don’t need a daylight-viewable monitor nor the built quality of a product you can rent. For owner-operators that are shooting inside most of the time, or people that are making live streams, you can’t go wrong with the Portkeys PT5.Another piece of accessory is the GDU Side Mounting Bracket for Komodo priced at $39. The bracket is reversible and it can mount on either side of the camera for mounting handles and other accessories. It includes multiple 1/4″-20 threads as well as three 3/8″-16 anti-twist threads. Every bracket includes two M4 screws to mount to the camera’s body.
RED Komodo can record in ProRes as well. Image Credit: Phil Holland.The Manfrotto PRO Light Flexloader L zippers are amongst the best I’ve ever seen, period. These are YKK zippers, which are some of the world’s best zippers you can get.
Left side: one HDMI input port, one USB port, a 3.5mm headphone jack, and a 7-24V DC input port with a barrel connector.B&H Buy link: Canon EOS 5D Mark IV Camera Body with Accessories Kit Was: $3,105.24 Now: $2,499.00 (Savings: $606.24).
For a while now I have been following the development of micro four thirds cameras. To be specific, I bought my first one exactly 10 years ago, the Panasonic LUMIX GH1.… and smartphone filmmakers / content creators.
When you power on the monitor, it’ll display your image, but nothing else. If you swipe up/down on the left side of the screen, you can quickly adjust your brightness setting. On the other hand, if you swipe up/down on the right side of the display, it’ll change your audio output level. Now, if you swipe up in the middle of the screen, it’ll show you the menu. Also, you can access the menu by simply pressing the menu button.Ahead of NAB 2019, Chinese company Z CAM has announced three new versions of their Z CAM E2 camera, with S35 and Full Frame 6/8K sensors. Now during the show, we had a chance to talk to Kinson Loo from Z CAM and hear more about what to expect. Let’s take a look at this upgrade!.
The battery fit at the back of the monitor is snug. The battery goes in and out smoothly; no issues here. There is a battery lock to keep everything nicely and securely in place.The PortKeys LH5P does have a built-in fan. In the menu, you can set it to low, medium, or high. I left the fan at a “low” setting during all my testing, and the monitor did not get super hot.
Panasonic LUMIX S1H Bundle – €328,49 Savings.As I mentioned previously, the PortKeys LH5P has one 1/4-20″ mounting point at the bottom. This is the monitor’s only mounting point, which is a bit of a letdown. I like to have multiple options for rigging a monitor to my camera, at least one on the left or right side and one at the bottom. There is nothing but an exhaust vent on the monitor’s right side, so I guess it would have been probably possible to put another mounting point here.
If you want, you can read the in-depth review of the Z CAM E2 by my colleague Gunther here.In a camera bag configuration, I was able to fit:.
The main tube/handle is where you insert your battery. This tube is 16cm long with a diameter of 3.2cm, and the total weight with a battery inside is around 170g.If you want to use this camera for live streaming, in a locked-down scenario which is not demanding in terms of dynamic range, it will work very well.
First Komodo accessory is the GDU Komodo Monitor Mount priced at $79. The mount sits between the camera and a monitor and provides forward and back tilt. According to GDU, a tension bolt system keeps the hinge tight across the tilt range and prohibits loosening during use.As I mentioned, the Portkeys PT5 does not have any physical buttons, and all the navigation is via the touchscreen. I’m glad there are only pages, as it is relatively easy to operate and understand, but there are also some drawbacks like the numerous fingerprints the screen will accumulate.
In terms of direct comparison, the Soonwell PH70 battery handle retails for $279.00; it has double the Volta Cinema Top Handle’s capacity, but you can’t change batteries, and it is a lot bigger. Plus the Soonwell handle we have at our CineD headquarters can’t be turned on or charged anymore after it wasn’t used for about three months. For the price, it’ll be hard to beat the Volta Cinema option.Top: menu and navigation buttons, a 1/4″-20 mounting point, a power On/Off button, and a function button.
There is a 3.5mm headphone jack if your camera doesn’t have one or if you want to monitor your audio signal directly from the Black Mini. The preamp is a bit noisy, but it works.According to Manfrotto, these “SAS-TEC” structural reinforcements feature exclusive viscoelastic memory foam for multi-impact endurance. Unfortunately, I did not open the bag with a knife to verify, but the bottom bumpers did well during my testing.
Adapta is KipperTie’s simple PL to RF adapter while Revolva also offers a system for inserting ND filter cartridges. Pricing for KipperTie Komodo accessories has not been announced yet.B&H Buy link: Panasonic LUMIX GH5 Camera Body with accessories set Was: $1,997.99 Now: $1,297.99 (Savings: $700.00).
However, the batteries and the top handle both have a “V” sticker on them that indicates which direction you’re supposed to put the battery inside the handle. It only took me three shooting days before all of the stickers disappeared. Volta told us:.Buy link: Canon EOS C500 Mark II Bundle Was: €19.452,65 Now: €18.928,94 (Savings: €523,70).
In 4k DCI mode (4096 x 2160) the crop factor of the Z CAM is about 1.9, using the speed booster gives a crop of 1.35 approximately.The screen itself is a WLED panel, which is a marketing term to say LED panel, so blacks should be nowhere near an OLED panel.
All the other features and specifications, including the display/monitoring tools/mounting points – and so on – will be identical.CVP Buy link: Panasonic LUMIX GH5 Camera Body with 12-60mm f/2.8-4 Lens Was: €1,616.67 Now: €1,319.83 (Savings: €296.84, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).
On the Black Mini, there is only one HDMI input port. The monitor supports a maximum input resolution of UHD at up to 30p and FullHD at up to 60p. My findings are a bit different from the manufacturer’s claim of “4K 60Hz”, but it’s already pretty good.What is an external camera screen or on-camera monitor?.
Function settings page where you’ll find all your monitoring tools.What matters to become a CineD writer:.
Lenswise, I opted for two lenses only: the Olympus 12-100mm f4 for the documentary part (it has great image stabilization), and a Canon EF 100-400mm f4.5 – 5.6 version 1 using a Metabones speed booster for the wildlife part.Display, video signals and monitoring functions.
The monitor has a contrast ratio of 1000:1, and the panel itself is 10-bit (8+2 FRC), so not “true” 10-bit. An 8+2 FRC panel is less expensive for manufacturers to produce, as it’s based on a “software trick” to simulate 10-bit on an 8-bit panel. I’m simplifying things here, but keep in mind that even some of the most expensive monitors from SmallHD or Atomos (except NEON) use the same technique. There are several ways to attach tripods or light stands to the Flexloader.
A monitor is a monitor, no matter its price, and I treat every product the same, so let’s get started!. All in all, I’ve not been overly impressed by this monitor as I’m used to much higher-end monitoring options. However, every time I had complaints about the Black Mini, I always came back thinking, “well, it’s $89, so it has some caveats, but it’s usable.”.
The LH5P display is color calibrated by Portkeys out of the factory. The monitor is in-factory calibrated using an X-Rite i1 Display Pro colorimeter. In short, it should be pretty color accurate out of the box.If you are tempted by the price to use it as a cinema camera be aware that the rolling shutter means that you cannot shoot handheld footage without a stabilized lens. It’s an absolute must in that scenario.
The Z CAM E2 in Conjunction with the Portkeys BM5 Monitor.There are quite a few 5”/5.2” on-camera monitors available on the market, at various price-point. It doesn’t make sense to compare the LH5P to some of the big boys like the SmallHD 503 Ultra bright that retails for eight times the price of the PortKeys.
On the exterior side, there are various buttons/controls to control your camera or adjust your settings. These controls include one customizable three-band switch, one focus wheel, one rec switch, and one nine-way joystick. Waveform, false color, and zebra.
Canon EOS C300 Mark III has also been announced this year. It is a sucessor of one of Canon’s most popular cinema cameras ever – the C300 Mark II. The new generation offers an uncropped 4K120p video on the Super35 sensor as well as modular design, internal ND filters, and Dual-Pixel AF.Inside the main compartment, you’ll find two central dividers that measure the Flexloader L’s interior length. The Flexloader L also comes with eight small dividers.
Once you short press the power button, the monitor takes around five seconds to boot up until it is operational, which is pleasant.Pretty much every tool you need is here to judge your image, except Zebras and a Vectorscope, but that’s already decent for an entry-level on-camera monitor.
The PortKeys BM5 top and bottom. The remote camera socket is located at the left of the USB port.I would suggest getting a case for transporting these batteries inside your camera bag. Maybe Volta Cinema will come out with a battery pack holder in the near future.
A monitor of this size and weight makes a lot of sense to use with a small and lightweight battery, like a Canon LP-E6 pack, which is around 50 grams. Indeed, for example, a Sony NP-F 970 battery is 350g, which is twice the monitor’s weight; it looks a bit ridiculous. Also, Canon LP-E6 batteries are the same I use to power my Canon EOS R. I only have to use and carry one type of battery on set.Dynamic Range of the Z Cam E2C Cinema Camera.
Some tweaks to the footage are needed to make it look more pleasing – that was not the case with the sister model Z CAM E2 which offers very nice, out of the box colors using the same LUT’s.In 4k DCI mode (4096 x 2160) the crop factor of the Z CAM is about 1.9, using the speed booster gives a crop of 1.35 approximately.
The loupe of the LEYE II features a +8 to -3 diopters adjustment.However, the 5-inch display of the BM5 is a little too small sometimes, especially for focusing or precise monitoring tasks. There’s some good news though since PortKeys is now improving their 7-inch monitor lineup by introducing a Metal Edition of their already-existing HS7T monitor. Let’s take a look at the improvements.
Oups, this was not supposed to happen.Also, there is a 7/24V power input port on the left side of the monitor that you can use to power the Black Mini externally.
Portkeys PT5 5″ On-Camera Monitor Released – Only $169. Among the people who got the first Komodo was Phil Holland and Philip Grossman. They both started posting first thoughts and answering questions about Komodo quite quickly. Phil Holland made a special thread on REDuser where he shares his findings on Komodo. Philip Grossman posted already several sample clips and comparisons with his RED Helium 8K on his Youtube channel.
Panasonic G9 used to be “only” a great MFT mirrorless camera with a main focus on photography. Panasonic recently announced new firmware update, which will equip the G9 with killer video features – same like its slightly bigger sibbling, the GH5. G9 will be able to record 10-bit video internally up to 4K 30p, 4K 60p 8-bit, new slow motion framerates in 1080p, and it will also support the paid V-log upgrade.The Z CAM Universe – the Facebook Group, the app, and the Camera’s Menu.
Out of the box, the colors and images coming out of the are totally off. So it’ll take you some time to get something I would call acceptable. Most on-camera monitors are set at 6500°K, but even with multiple tweaks, I had to put the Black Mini to 7500°K and make some brightness/tint adjustments by hand to get in a somewhat accurate ballpark.But best of all, if you get a pair the Teradek 4K Monitor Modules (one TX and at least one RX) and an ARRI camera (available now) or a RED camera (software update coming soon), you will be able to fully control the camera from your wireless monitor. This is a huge win for high-end drone pilots, shooters in remote locations, or DPs who just wants to drop their ISO or change ND from video village.
The Z Cam E2C uses an MFT sensor (slightly smaller than the one used in the Z CAM E2) which allows DCI 4K capturing of up to 4K 29.98 fps in combination with the Z-Log2 flat picture profile.One of the things I love the most about my PortKeys BM5 is its build quality. The aluminum alloy makes the monitor sturdy and reliable. Moreover, it is packed with professional features that come at an astonishing, affordable price.
On the left side, there is a standard ARRI Rosette, the USB port, and the On/Off switch. At the bottom, you’ll find two 1/4″ holes for mounting purposes, and the diopter adjustment dial.The main tube/handle is where you insert your battery. This tube is 16cm long with a diameter of 3.2cm, and the total weight with a battery inside is around 170g.
Portkeys put some work towards its user interface, and it is now much easier to use, especially on the PT5.Canon EOS 1DX Mark III Bundle – €481,91 Savings.
25% off ARRI Academy certified courses. PortKeys HS7T Metal Edition: all-metal design.
There are four user-assigneable buttons on top of the LEYE II.Powering options and battery life.
you’re getting your name out there to thousands of eyeballs, and we can link to your personal site from your name in the news and review posts. One small cinema camera with a cage (Canon EOS C70).
The Manfrotto PRO Light Flexloader L is one of the biggest carry-on camera backpacks available on the market. In this review, we’ll take a look at the bag’s build quality, features, and how much gear it can hold. If you’re looking for one of the best solutions money can buy, let’s take a closer look at the Flexloader L!.I’ll say it again: this is an $89 on-camera monitor, so don’t expect it to survive a drop at home nor monthly rentals to professional filmmakers. It gets the job done for owners/operators, but that’s it.
Special Camera Deals from CVP for CineD Relaunch.On top of the P6, there are four control buttons to quickly access your favorite functions, an On/Off switch, and four buttons to navigate through the menu. To mount the monitor on your camera, there is a 1/4 20″ mounting point at the bottom and one on the right side.
Finally, one last thing that I did not understand is that you only have to press the power button once to turn the monitor on/off. You don’t have to hold that button, just press it. I guess this thing can cause a lot of unwanted switch-offs of the.RED Komodo is the new Super 35 6K cinema camera that features a very small form factor. RED shipped out the first batch of custom-colored pre-release cameras in Grossman Gold color. The first hands-on tests and sample footage from Komodo users as well as first accessories are appearing.
Although the LH5H is an “entry-level” monitor, it features tons of monitoring tools like its big brother, including:.In a nutshell, the top handle can support most DSLR and mirrorless cameras, as well as cinema cameras, including the BMPCC 4K/6K, the RED KOMODO, and up to an ARRI Alexa Mini, which is impressive. Also, it should support most on-camera monitors and camera accessories, as long as they stay within the 7.2V/5A limit.
CVP Buy link: FUJIFILM X-T3 Camera Body Was: €1,314.19 Now: €1,041.41 (Savings: €272.78 including Cashback).And that’s it. It is not an overly-complicated bag with tons of zippers and pockets all over the place. Instead, Manfrotto decided to keep things simple, and it just works perfectly.
The only thing that prevents it from slipping out of the handle is the battery cap (if it ever moves.) Update: Volta Cinema told us that the monitor mount comes with a small m3 screw in the box, that is used to secure it tightly to the handle, as the monitor mount is not meant to move around in any way.On top of the EVF, you’ll find four user-assignable buttons.
Finally, the Volta Cinema Top Handle has three 1/4″-20 mounting points at the handle’s back. The threading is really thin, and the metal is not thick here. While this is nice to have mounting points to store screws, I wouldn’t mount a camera accessory to it, even if I don’t see it breaking at all.I think monitors like the Atomos Shinobi that retails for a $299 price tag ($100 cheaper), or even the AndyCine A6 Plus V2 do make a better comparison starting point. I worked on a table to compare all three models which you can find below.
I think that the can unleash its full potential if you’re shooting indoor. Also, if you’re usually doing live streamings or even professional-looking online meetings, it could be the perfect tool for you at a very reasonable price. The Portkeys PT5 features all the monitoring you expect from a monitor in 2021, including:.
So far, so good! Next, I put the Z Cam E2C through our lab to measure dynamic range and rolling shutter.Phil also tested the Sensor Calibration (Black Shading) with the Komodo. Black Shading is basically a sensor and pixel check while generating a calibration map to counteract a sensor’s inherent fixed pattern noise. For RED DSMC2 cameras it was roughly 1 minute per “K” for calibration (8 minutes on RED Monstro 8K). RED Komodo 6K is faster in this regard – Sensor Calibration was done in less than 1.5 minutes.
On the Portkeys PT5, here are the built-in tools:.To charge batteries, all you have to do is slide them into the battery charger. The pins inside the charger will align with the battery connectors, and it’ll start charging. However, the batteries are not locked into place in the charger.
Disclaimer: As usual, let me first say that I am not a VideoGear Ambassador. Like every other article on CineD, VideoGear, or any other brand, did not pay us to write this article. However, the company approached and sent us the product to review for free.In this discounted set, along with the camera, you get SanDisk 32GB extreme PRO UHS-II SDHC memory card, Watson 2000mAh battery pack, Watson compact AC/DC charger for NP-FZ100 battery, and Ruggard Journey 24 DSLR shoulder bag.
CVP Buy link: DJI Osmo Action Was: €319.18 Now: €241.56 (Savings: €77.61).I had to read instructions to find simple functions. For example, when you’re on the Function page, I activated the Frame Guide tool by tapping on the screen and activating it on the side. Then, I could not find where to adjust the settings and aspect ratio of that tool.
The stickers were a bit of an afterthought when we realized not many of the clients were actually watching the video guide before using the handle. It has resulted in a couple of instances where the battery was forced in the wrong way, and it broke the pins (which is also why we provide the supplementary set). In addition, the Z CAM app essentially gives you full control over all the camera settings – very nice!.
A lot has been written about the FUJIFILM X-T3, and a lot of it here, on cinema5D. We’ve reviewed the camera (twice), and crowned it our best mirrorless camera of the year 2018. Currently, there is a nice discount on this camera in both B&H (including free accessories – memory card and bag) and CVP.One SDI output and one HDMI output port with cross-conversion.
Fan speed (low/medium/high), volume output, image flip. Finally, on some pages, like the Settings page, you have various settings you can adjust at the bottom of the screen/menu. But, for some settings, there are two subpages. One weird thing is that you have to use the physical buttons to access the second subpage, which doesn’t make sense to me.
B&H Buy link: Sony a7 II Camera with 28-70mm Lens and Accessories Kit Was: $1,598.00 Now: $998.00 (Savings: $600.00).The design of the Portkeys PT5 is minimalistic, and I love it. It looks a lot like an Apple iPhone.
To install it, you have to open the battery compartment and slide the monitor mount in place. Then, close the battery cap, and that’s pretty much it. The fit of the monitor mount on the handle is very snug, and there are no ways to lock it in place.The PortKeys P6 is a lightweight – 0.28lbs/130grams – entry-level monitor for filmmakers looking for a compact on-camera display. The P6 features an 8bit 5.5″ 1080P display with a 500nit brightness and 1000:1 contrast ratio. This monitor is much more affordable than their PortKeys BM5 that is a workhorse entirely made of aluminum – the P6 is made out of ABS plastic.
Last but not least, at the front of the bag, inside the rain cover pocket, you’ll find two nylon loops. Using the two front straps and these two nylon loops, you can attach a heavy camera tripod to the bag. I tried with my Sachtler Speed Lock CF HD set of tripod legs: it works.The Chinese camera manufacturer Z CAM has made quite an impression on us when we reviewed their flagship model Z CAM E2. Now we have the much more affordable sister cam Z Cam E2C cinema camera in our hands – has it inherited some of the strong features? Read on ….
It is entirely usable in bright daylight conditions, but the battery life will take a severe hit. You can see what you’re shooting, sunlight’s reflections are not bad, but I wouldn’t judge my exposure by just looking at the picture without any monitoring tools (and I guess you shouldn’t do that with any monitors anyway).DJI Osmo Pocket – $90/€48 Discount.
However, the 5-inch display of the BM5 is a little too small sometimes, especially for focusing or precise monitoring tasks. There’s some good news though since PortKeys is now improving their 7-inch monitor lineup by introducing a Metal Edition of their already-existing HS7T monitor. Let’s take a look at the improvements.The HDMI cable is relatively thick, and while I prefer slim cables, VIDEOGEAR at least provides you with a way to connect the monitor to a camera.
PortKeys is a Chinese company specialized in creating monitors and viewfinders. We first reported about their PortKeys BM5 monitor, a 5-inch field monitor with SDI/HDMI input and output ports capable of controlling your camera. Then, the company released the OEYE-3G and LEYE EVFs, a Universal Handle that can control nearly every camera, and more recently, the PortKeys LH5P that we’re reviewing here.CVP offers free LUMIX 25mm f/1.7 lens (!) and free 3-year Panasonic LUMIX warranty. CVP also offers G9 in a set with the LUMIX 12-60mm f/2.8-4 lens for an incredible price.
In short, blacks are not black anymore, but more on the grey side, and the picture starts to be a little washed out. On the , even if it has a “low” maximum brightness of only 400nit, you can see that the image shifts quite a lot when the backlight is at 100%.The display has a resolution of 1920 x 1080. It is a touchscreen with a maximum brightness of 2200nits and a contrast ratio of 1000:1.
The Portkeys PT5 is available now for $169/€150. Very few other monitors will offer you this many features at this price point, and I can only think of the FeelWorld F5 and Desview S5 to maybe compete with it.proficiency in filmmaking – you know your stuff in one or more areas of filmmaking (producing, editing, directing, cinematography, post-production …).
The PortKeys LEYE is available now for $399. It comes with a right-angle HDMI adapter, a sponge eye mask, a USB thumb drive with the user manual, and a D-Tap to barrel connector cable.you know our site and our competitors and follow them regularly.
If you wish to attach your monitor to a 1/4-20″ mounting accessory, all you have to do is put a 3/8-16″ to 1/4-20″ threaded insert. Simple and easy, I guess implementing this type of mounting option at the bottom of every monitor is easy to make, making every filmmaker happy.Now Z CAM is introducing three new cameras. The E2 S6 (Super-35 6K camera with a choice of MFT, EF or PL mounts) and two full frame models, with 6K and 8K sensors. (E2 F6 and E2 F8 with a choice of EF and PL mounts).
One of the only things that could be improved on the BM5 II that I have is the overall UI, which feels a bit outdated. The new PortKeys LH5H features a new UI that looks much better and more intuitive. On the left and right sides of the monitor, you’ll find various customizable shortcuts to your favorite monitoring tools. The display itself is tactile, so you can activate/disable functions quickly without having to go inside the menu.The great thing about the BM5 and HS7T is that they are equipped with both HDMI and SDI inputs and outputs. 4K video signals up to 30fps and FullHD up to 60fps are supported over the HDMI, while the SDI connections only support 1080p signals up to 60fps.
PortKeys has just announced a new 5.5-inch field monitor: the PortKeys P6. This monitor features a 1080P display with a decent 500nit brightness and a 4K HDMI input plus a 4K HDMI output. Let’s take a closer look at it!.To modify a tool’s settings, you have to hold the icon of the tool you want to adjust in the sidebar and slide to the right at the same time. I’ve been able to make it work, but even with the user manual, it’s not straightforward, and it took me a dozen tries to get to the tool adjustments settings.
Top: four customizable function keys, a power switch, and four buttons to access and navigate inside the menu.Another great addition is on the backside of the monitor. In fact, the new design includes a plate on the back of the screen to comfortably host a wireless video transmission system.
In theory, this combo should work very well. The Portkeys BM5 monitor (for detailed specs see our article here) is a 5” FHD monitor which allows via a separate cable to display and change settings in the camera’s menu on the touchscreen – on our early prototype this didn’t work though and a newer firmware wasn’t yet available.What can you power with the Volta Cinema Top Handle?.
The monitor mount came in two parts. The round piece’s screws had threadlocker which makes removing them really hard, but you have to do it to assemble the monitor mount together.On the left side, you’ll notice the USB input/output port. You can use this port to load your own LUTs to the monitor’s memory. Also, this USB port doubles as a “streaming out,” which means you can connect the monitor to your computer that will recognize it as a webcam.
The design of the Portkeys PT5 is minimalistic, and I love it. It looks a lot like an Apple iPhone.Great monitoring tools, including 3D LUT monitoring, waveform, false color, zebra, peaking, zooming, audio meters, crosshair, framing guides, grids, aspects.
As I mentioned previously, the PortKeys LH5P has one 1/4-20″ mounting point at the bottom. This is the monitor’s only mounting point, which is a bit of a letdown. I like to have multiple options for rigging a monitor to my camera, at least one on the left or right side and one at the bottom. There is nothing but an exhaust vent on the monitor’s right side, so I guess it would have been probably possible to put another mounting point here.The PortKeys LH5H is in-factory calibrated using an X-Rite i1 Display Pro colorimeter. The display should look as good as it can be right out of the box without further adjustments. If you have an i1 Display Pro prob, you can re-calibrate your LH5H yourself later down the road if needed.
The top flap features three meshed pockets: two small ones (12.5 x 11cm/4,92 x 4,33in) at the top and a large one at the bottom (23 x 17cm/9 x 6,7in).the height of the small dividers could be higher so small objects doesn’t move inside the bag.
The has a glossy and quite reflective screen and is not very bright, so if you plan on using the monitor outside, the included sun hood will come in handy.This red power button is next to the Function button – they’re the same size/feeling to easily mix them up. Building up muscle memory will be difficult and you’ll probably turn off your monitor multiple times trying to find that function button.
A quite surprising result on the rolling shutter measurements, which adds up to the very positive overall impression: in 4K DCI 25p mode (using ProRes HQ and ZLOG2) I got a very good result of 11.1[ms]. For comparison, the BMPCC4k has a rolling shutter of 16[ms] in UHD 25p mode. Up to 50 custom 3D LUTs can be loaded into the FEELWORLD F7 PRO. Source: FEELWORLD.
Make sure to check our hands-on and footage article as well as Philip Bloom’s two hour in-depth review of the camera. This bundle will get you the camcorder body with Sony 120GB XQD G-Series memory card and a spare Sony BP-U60 56Wh battery (another battery ships with the camera already).CVP Buy link: DJI Osmo Action Was: €319.18 Now: €241.56 (Savings: €77.61).
When the PT5 is up and running, you can adjust various display settings inside the menu, including:.CVP Buy link: Panasonic LUMIX G80 Camera with 12-60mm Lens Was: €609.02 Now: €525.88 (Savings: €83.14, Free 25mm f/1.7 lens, and Free 3-year warranty).
The E2 already received a firmware update version 0.95 that you can download here. The Atomos Ninja V will receive a firmware update later in June 2020. Both of these firmware updates are free.Zoom, Peaking, Framing guides, Grids, Aspects, Anamorphic de-squeeze.
Anyone who has ever set foot on a film set likely saw a half-dozen actors and crew members standing over a camera operator’s shoulder, watching the shot through a screen attached to the camera.Like the PortKeys OEYE-3G, the LEYE doesn’t have a built-in battery. You can power it via the DC 7-24V barrel port or 5V USB Type-A port on the device’s right side. It means that you’ll have to use an external battery to power the EVF, either a V-Lock/Gold-Mount battery or a power bank.
Portkeys has just launched a new lightweight 5″ on-camera monitor: the Portkeys PT5. This monitor can take HDMI input/output signals at up to 4K DCI at 24p or 4K UHD at up to 30p, it has a maximum brightness of 500 nits with all the monitoring tools you need to control your image properly, and it retails for only $169. So let’s take a closer look at Portkeys’ most affordable monitoring option yet!.You can power it via Sony NP-F style batteries, or the DC 12V 5A 4-pin LEMO connector.
Last but not least, Portkeys implemented wireless camera controls for the RED Komodo. This means that, compared to the SmallHD Focus Pro, for example, you don’t need an extra cable to communicate between the Komodo and the monitor. Crosshair, framing guides, grids, aspects.
B&H Buy link: Panasonic LUMIX G9 Camera Body with accessories set Was: $1,497.99 Now: $997.99 (Savings: $500.00).This is not that bad on the LH5P, and even at maximum brightness, the image remains viewable and usable. Keep in mind that this is a budget-friendly monitor, so comparing it to the big boys doesn’t make sense.
CVP Buy link: Panasonic LUMIX G9 Camera Body Was: €1,100.86 Now: €941.78 (Savings: €159.09, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).On the , here are the built-in tools:.
As you can see, the PortKeys LH5P represents a good value for money compared to other monitors in the same price range, but it will be up to you to decide if it ticks all the boxes for your needs.Also, the barrel connector should be replaced by a 4-pin power input at the back of the unit, next to the SDI input. Talking about the SDI input: the viewfinder should support resolutions up to 1080p60 via the SDI Input.
Dynamic Range of the Z Cam E2C Cinema Camera.RED Komodo can record in ProRes as well. Image Credit: Phil Holland.
The Chinese camera manufacturer Z CAM has made quite an impression on us when we reviewed their flagship model Z CAM E2. Now we have the much more affordable sister cam Z Cam E2C cinema camera in our hands – has it inherited some of the strong features? Read on ….PL to RF Mount Adapter for Komodo. Source: KipperTie.
The PortKeys LEYE is not the company’s first try at making an EVF. Indeed, last year, they released the OEYE-3G EVF with SDI/HDMI input ports and a very high 1080P resolution. There are two little charging indicators on top of the Volta36 battery charger that goes from red (charging) to green (charged).
We hope you see the opportunities and chances of growth this presents if you feel like we’re looking FOR YOU.Chinese manufacturer PortKeys has just introduced a new version of its famous HDMI-only compact electronic viewfinder: the PortKeys LEYE II. The LEYE II now features a built-in battery plate. Also, PortKeys has been teasing an SDI version of its viewfinder for quite some time now, which should be released soon. So let’s take a closer look at these!.
Canon EOS C500 Mark II is a full-frame cinema camera capable of 5.9K video. When announced last year, the camera introduced the new modular design. To know more about it, check our Lab Test as well as our first look hands-on video. This bundle will additionally get you a Canon BP-A60 (OTH) battery and SanDisk CFexpress Extreme Pro 512GB memory card. Adapta is KipperTie’s simple PL to RF adapter while Revolva also offers a system for inserting ND filter cartridges. Pricing for KipperTie Komodo accessories has not been announced yet.
The Black Mini has a claimed maximum brightness of 400nit, which is not daylight-viewable like every monitor with a brightness under 1500nit. It does not mean that you can’t use it outside with the included sun hood, but you’ll have a hard time in direct sunlight. The glossy display doesn’t help with that, but we’ll talk more about that later in this review.As you can tell, there are a million ways to position the dividers and reconfigure the Flexloader L to fit your gear and needs. It’s a very versatile bag that can carry a lot of gear while still being carry-on sized so you can bring it with you on a plane.
You can immediately feel that it’s a well-made product out of the box. The materials look dense, the stitchings of the bag are perfect, the sewing thread is thick.FEELWORLD F7 PRO back view. Source: FEELWORLD.
Since May this year, I have been using the micro four thirds (MFT) Z CAM E2 and more recently now the Z Cam E2C cinema camera. The more expensive Z CAM E2 flagship model has very pleasing colors out of the box, a flat Z-Log2 profile and high frame rates (up to 4K 160fps) in combination with strong internal recording options (H265, ProRes) as well as anamorphic modes – a very well rounded offering.Most of the time, you can’t use a probe or spectrophotometer to adjust your on-camera monitor. It means that you’ll have a hard time trying to calibrate it correctly by hand with only a few built-in picture adjustment tools at your disposal in the menu system. In short, on-camera monitors must be as good as possible out of the box with minimal color adjustments needed by the end-user.
PortKeys is also teasing a new version of the LEYE with SDI and HDMI input ports: the LEYE SDI. This version should also have a built-in Canon LP-E6 battery plate.Just like its more affordable sibling, this camera also suffers from some overheating issues. Take a look at our news post from Canon R5 launch to know more about it. This set includes an extra Canon LP-E6NH battery and Sandisk 512GB 1700MB/s CFexpress memory card.
I’m glad to see that Portkeys listened, and you can now store the PT5 with all its accessories inside the case as well – good job!.PortKeys LEYE II Viewfinder Introduced – Now with Built-In Battery Plate.
The motor control settings page if you have a follow focus attached to your monitor.I hope that in the next production batches, Volta will solve that with a permanent labeling or engraving technique. We’ll talk about the battery charger’s build quality and monitor mount a bit later in their dedicated sections.
The right side of the Portkeys PT5.The team at PortKeys is moving fast, and two weeks after the announcement of their latest P6 monitor, they just released a new product. However, this time they are not back with a display, but with a camera handle. This handle is a new kind of product for PortKeys, but it features the same leitmotiv as their monitors: affordable, innovative, and high-quality.
Home
Community
☰
