Also, and this is not particular to this monitor, but something I still don’t understand, is why manufacturers only put 1/4-20″ mounting points – thankfully with locating pins on the LH5P – at the bottom of their products.There is a little built-in screen on top of the camera but no “proper” display. You need to add your monitor via the HDMI/SDI ports.
CVP Buy link: Sony a7 III Camera Body Was: €1,710.35 Now: €1,564.83 (Savings: €145.52 – CashBack).B&H Buy link: DJI Osmo Pocket Was: $399.00 Now: $309.00 (Savings: $90.00).
Sony a7R II Camera Body with Free Accessories Kit – $400 Discount.you have fluent writing skills in English (native speakers preferred).
Brightness, contrast, saturation, tint, sharpness, color temperature.When you power on the monitor, it’ll display your image, but nothing else. If you swipe up/down on the left side of the screen, you can quickly adjust your brightness setting. On the other hand, if you swipe up/down on the right side of the display, it’ll change your audio output level. Now, if you swipe up in the middle of the screen, it’ll show you the menu. Also, you can access the menu by simply pressing the menu button.
We are using a new test method based on a high frequency, quartz & microcontroller based strobe light at 300Hz. As the sensor readout happens from the top to the bottom, we are getting a sequence of black and white bars from the strobe.Optimize the camera control interface and functions: improve the aperture display accuracy of BMPCC4K/6K. Fixes an issue where the BMPCC 4K resolution cannot be switched to 4K 2.4:1 4096×1720.
tell us who you are, what you do, what you enjoy writing about most – and why you think this is something for you.The user interface of the PortKeys LH5P is not its most significant strength, to say the least. When I purchase or review a product, I never read instructions (like most filmmakers, I am assuming), which means a product must be intuitive. I think you should be able to give a monitor to any camera assistant and everybody must be able to make it work without reading a book. That is not the case with the LH5P.
Display, video signals and monitoring functions.Can you get more camera stuff inside? For sure, but that’s already a fair amount of gear to carry on your back.
The features a 5″ LCD display with a FullHD 1080p / 1920 x 1080 resolution. The display is a touchscreen that you can turn on and off via a long press on the power button.For more information about the LH5H, you can visit PortKeys’ website here.
Also, the straps feature an adjustable torso height harness system.The batteries have two power connectors (plus and minus) used to charge them and connect to the handle’s pins. Also, there are small coded pins, so you can’t insert the battery inside the handle or charger in the wrong direction.
Three “normal-sized” lenses and a big zoom lens (Canon EF 70-200mm F/2.8 L IS). Portkeys, a Chinese company specialized in HDMI and SDI field monitors, recently announced an impressive new monitor: the PortKeys BM5. This 5″ monitor features a lot of monitoring tools, but it can also control your camera. Let’s take a look at it.
Bottom: one camera control mini-USB port, a 5-pin motor camera control port that doubles up as a DC 7-24V power output port. There’s also a 1/4-20″ mounting thread and a USB Type-A port to update the firmware of the LH5P, load your LUTs, or power it.One HDMI input and one HDMI output port supports resolution up to 4K DCI at 24p, 4K UHD at up to 30p, FullHD at up to 60p.
the height of the small dividers could be higher so small objects doesn’t move inside the bag.Display adjustments: Color Temperature, Contrast, Sharpness, Brightness, Tint, Backlight, Display Flip, Underscan.
Gimbals, Tripods, Monitors, Wireless Video, ….The Volta36 battery charger has two charging indicators.
“To set up wireless camera control for KOMODO or DSMC2 (coming later this summer), the following hardware and software are required.Control Any Camera with the PortKeys Universal Handle.
Panasonic LUMIX S1H Bundle – €328,49 Savings.25% off ARRI Academy certified courses.
FilmConvert’s film emulation plugins for all editing platforms are on sale for the lowest price this year. There is up to 60% off on all FilmConvert plugins, including new FilmConvert Nitrate for Adobe Premiere Pro, After Effects and DaVinci Resolve.As I mentioned earlier, the Portkeys PT5 casing is made out of ABS plastic. It feels like good quality plastic, but I wouldn’t want to drop the monitor just to check if it survives.
In short, the PortKeys LH5P has plenty of input/output power ports, which is nice, as some much more expensive options out there don’t offer that much. You are limited to a single 7-24V Lemo port for power and some may miss having a battery option. After a quick run-through the menu/UI seems especially intuitive and the peaking seemed great.
Inside the small pockets with tripod logos, you’ll find straps that attach to their respective rubber hooks.What matters to become a CineD writer:.
PortKeys LH5P on the left, PortKeys LH5H on the right.In terms of battery life, I’d say it’s a massive improvement over a Sony NP-F 970 battery on the back of an on-camera monitor. On the SWIT CM-S75F, one Volta36 battery gave me close to four/five hours of continuous runtime. On the PortKeys BM5, my four hours shoot was over, and the top handle’s battery wasn’t dead.
To adjust the monitor mount’s tension, you can tighten/loosen the two screws on the side that holds the monitor bracket in place, but you always need an Allen key for that. A ratcheting screw/lever could’ve been a better way to do it.A few iterations later, after much trial and error, testing, and sleepless nights, my vision came full circle and the handle was launched in August. Since then, the product has seen some solid improvements, including the custom pins (found inside the handle) which can now ensure 5A output, and the custom cabling for the batteries which reduced the internal resistance resulting in minimal heat output and longer recording times.
Canon’s full-frame DSLR flagship 5D Mark IV offers interesting price tag and free accessories in kit on B&H (spare battery, memory card, bag, and optics cleaning kit). Only the large pocket is closed by a zipper. The two small ones feature soft fabric wings to kind of close them, but tiny items could eventually fall out of the pockets as they are not physically closed.
Manfrotto PRO Light Flexloader L carrying capacity.On the Portkeys PT5, there are one HDMI input port and one HDMI output port. The monitor supports a maximum input resolution of DCI 4K at 24p, 4K UHD at up to 30p, and FullHD at up to 60p. I tested all three with a Canon EOS R and a Canon EOS C70 and did not have any issues, may it be on the input or output side.
Rolling Shutter of the Z Cam E2C Cinema Camera. Back on the Function page, you’ll find a little “+” icon on the left. Press it, and you can assign any of the monitoring tools as a shortcut in the toolbar.
The Z CAM E2 follows the “brick” look – like the RED ecosystem – and you will need some accessories to make it work properly. Some third-party manufacturers have started to implement it in their development, like PortKeys with their BM5 that can control the camera.For a while now I have been following the development of micro four thirds cameras. To be specific, I bought my first one exactly 10 years ago, the Panasonic LUMIX GH1.
The PortKeys LH5P comes in a small box. When you open it, you’ll find a Pelican-style hard case.The monitor has a built-in fan that you can set to auto or adjust to low/mid/high in the menu. However, it should be much more silent than other monitors in Portkeys’ lineup. It has fewer functionalities/features and is also less bright compared to their BM5 III, for example.
In addition to that, we are also looking for a writer who is particularly interested in “smartphone filmmaking” as we are planning to greatly extend our coverage in that area. Both news about new smartphone cameras and apps as well as reviews of these cameras are important for us.Some tweaks to the footage are needed to make it look more pleasing – that was not the case with the sister model Z CAM E2 which offers very nice, out of the box colors using the same LUT’s.
If your monitor colors are incorrect, you won’t see your footage how it really is. For example, when a monitor’s colors are wildly inaccurate, you can see orange when you’re supposed to see yellow or red. It can affect how you’ll set your camera’s white balance or exposure, for example. You can power it via Sony NP-F style batteries, or the DC 12V 5A 4-pin LEMO connector.
There is a 3.5mm headphone jack if your camera doesn’t have one or if you want to monitor your audio signal directly from the Black Mini. The preamp is a bit noisy, but it works.Also, one thing that I found annoying is that the display catches fingerprints quickly. It means that you need to clean your monitor very often, which can be annoying.
Fast forward 10 years and I have the new cinema camera Z CAM E2 from the Chinese manufacturer Z CAM in my hands. A micro four thirds camera capable of shooting 4k DCI using a LOG profile (Z-LOG2) recording ProRes HQ 10bit 4:2:2 internally up to 60fps (4k H265 up to 120fps, 160fps in 1:2.4 mode). Wow!.I love the fact that it allows high frame rates, ProRes recording, and many more things. Z CAM is definitely a company to watch out for – also, I am curious to see their new APS-C and full frame cameras (S6, F6, and F8) that are scheduled to arrive later this year.
I have tried this option in practice but quickly abandoned it for moving shots, as the motion blur (or partial lack thereof) of the resulting image looks weird. It may work for a static interview though, or a situation where the scene demands a higher shutter speed (1/200 and up).B&H has a great deal on the Sony a6000 with two lenses – E PZ 16-50mm f/3.5-5.6 OSS and E 55-210mm f/4.5-6.3 OSS – plus memory card, extra battery, battery charger, and camera bag.
The NATO rail ratcheting knob is not spring-loaded.At the rear of the monitor, you will find the battery plate to power the PortKeys P6. The design of the battery plate is similar to the SmallHD 701, and you can use Sony NP-F batteries on the left side, or Canon LP-E6 on the right side. Also, you can power it with an external battery via the DC barrel input port.
The Black Mini has a claimed maximum brightness of 400nit, which is not daylight-viewable like every monitor with a brightness under 1500nit. It does not mean that you can’t use it outside with the included sun hood, but you’ll have a hard time in direct sunlight. The glossy display doesn’t help with that, but we’ll talk more about that later in this review.Also, there is a 7/24V power input port on the left side of the monitor that you can use to power the Black Mini externally.
The bundle further includes the Sigma MC-21 adapter for Canon EF lenses and the 5″ monitor/recorder Atomos Ninja V. With the Ninja V, you can take advantage of recording in 12-bit ProRes RAW with this camera. In this price range, it is a very interesting combination.These tools are pretty standard nowadays on on-camera monitors, but nothing is missing on the LH5P. Also, you can adjust the position and scale of each tool via the touchscreen, but more on that in a second.
Some tweaks to the footage are needed to make it look more pleasing – that was not the case with the sister model Z CAM E2 which offers very nice, out of the box colors using the same LUT’s.Portkeys put some work towards its user interface, and it is now much easier to use, especially on the PT5.
The HDMI ports are located on the left side of the monitor. There’s also a 3.5mm headphone jack in the middle of the ports.Once you switch the power button on, the monitor takes around ten seconds until it is operational, which is acceptable.
That’s many included accessories for an entry-level/budget monitor and even more than some previous and more expensive options Portkeys has to offer.Right side: a power switch, a USB Type-A port, and a 7-24V power input/output port with a barrel connector.
The company has just released a new budget-friendly 5″ monitor that could be a good option for filmmakers that are just starting out.Let’s be clear: the PT5 is not a rental product; it is designed for owner-operators or filmmakers starting out, and at this price point, you can’t complain that it’s not built like a tank that you can throw at walls.
PortKeys Universal Handle – Construction.In theory, this combo should work very well. The Portkeys BM5 monitor (for detailed specs see our article here) is a 5” FHD monitor which allows via a separate cable to display and change settings in the camera’s menu on the touchscreen – on our early prototype this didn’t work though and a newer firmware wasn’t yet available.
Chinese monitor manufacturer PortKeys just released a new budget-friendly monitoring solution to its lineup: the PortKeys LH5H. If you’re new to PortKeys products, we already reported about their BM5 5″ HDMI & SDI monitor, OEYE-3G EVF, or, more recently, the PortKeys KeyGrip handle. I’ve been using the extremely bright (2200 nits) PortKeys BM5 II for several months now, and it quickly became my go-to on-camera monitor.Canon EOS C300 Mark III has also been announced this year. It is a sucessor of one of Canon’s most popular cinema cameras ever – the C300 Mark II. The new generation offers an uncropped 4K120p video on the Super35 sensor as well as modular design, internal ND filters, and Dual-Pixel AF.
When looking at the price of this camera, keep in mind though that you have to rig it up with a monitor and audio equipment – see the setup that I used for the sample footage below:.The main tube/handle is where you insert your battery. This tube is 16cm long with a diameter of 3.2cm, and the total weight with a battery inside is around 170g.
FUJIFILM X-T4 Bundle – €112.82 Savings. Sony: A9, A7 II, A7 III, A7 IV (from their website – yes, this camera doesn’t exist yet!), A6000, A6300, A6400, A6500, RX100, RX02.
HDMI is much more common on DSLR and mirrorless cameras and SDI is much more common on larger cinema cameras. While HDMI can transmit both video and audio, it doesn’t have the ability to lock into a port like SDI does. On the other hand, SDI only transmits video information and not audio.The biggest benefit for me is that the Volta Cinema Top Handle removes weight from your rig and keeps it well balanced. Indeed, Sony NP-F batteries at the back of a monitor tend to be clumsy and not heavily enjoyable to shoot with. With this top handle, you feel lighter and gain freedom.
The HS7T Metal Edition still features a 7-inch 8-bit IPS display with a maximum resolution of 1920×1080 and a viewing angle of 178°. The screen has a contrast ratio of 1200:1 and it can reach a peak brightness of 1200 nits. This is not as bright as the BM5 (2200 nits), but it starts to be usable under bright sunlight. The PortKeys OEYE-3G EVF next to a Panasonic GH4.
PortKeys HS7T front and back views. Source: PortKeys.Once in place, it works nicely, but I had issues getting it in. Indeed, it came in two pieces in the box: the round part that slides in the handle and the piece that attaches to your monitor. I had to unscrew the two screws on the round piece to assemble the monitor as one piece like it should be.
Setting up the Z CAM E2 Cinema Camera for the Trip.To me, the Manfrotto PRO Light Flexloader L shines as a multipurpose backpack. To give you an idea, I was able to fit:.
The left side of the Portkeys PT5.The buttons on top of the monitor are a bit rigid and clicky too. The battery fit at the back of the monitor is smooth, tolerances are good, and both Sony/Canon batteries go in and out smoothly; no issues here.
There is also a nice Z CAM smartphone app available for IOS (Android still in a beta release), which connects to the camera’s wifi and allows access / display / change all settings as well as providing a full screen image preview with little latency.When the battery compartment is open, all you have to do is align the stickers (if they are still here) of the battery and handle and push the battery inside. Jokes aside, even without the stickers, you can’t go wrong when you get used to the product. Put the connectors of the battery down, and there you go.
A laptop pocket at the back can easily fit a 16-inch MacBook Pro or an iPad, for example.If you’re often shooting outside you should probably not consider this monitor as the screen is tough to see if you’re shooting outdoor. Also, even on a cloudy day, the included sun hood has its limits.
The PortKeys LH5P is available now for $399.00, and the package includes a straight to elbow DC power cable, one camera control cable, a safety box, and a USB stick with the instructions. The LH5H currently retails for $100.00 less at $299.00 and can be a nice option if you don’t need the extra aluminum toughness. For more information, please visit PortKeys’ website here.Because it oversamples its 20.1 MP full-frame sensor, it offers better image quality, but at the cost of some overheating issues. Take a look at our Canon R6 review to know more. This set includes an extra Canon LP-E6NH battery and Canon 24-105mm f/4L RF-Mount lens.
PortKeys Firmware Update and Updated PortKeys KeyGrip.CVP Buy link: DJI Osmo Action Was: €319.18 Now: €241.56 (Savings: €77.61).
It is powered via a single Sony NP-F style battery, and you can use the power output of the BM5 to feed your camera via a dummy battery. Also, you can power it with an external battery by using the Lemo port on the monitor. The Chinese manufacturer PortKeys is starting to be well-known for making affordable monitoring solutions for filmmakers with a lot of built-in monitoring and camera control features. We first heard about the company with the fully-featured BM5 monitor that can control your camera, then more recently the LH5H that is HDMI-only which we are currently reviewing – stay tuned for more info about it.
However, the batteries and the top handle both have a “V” sticker on them that indicates which direction you’re supposed to put the battery inside the handle. It only took me three shooting days before all of the stickers disappeared. Volta told us:.What and who are we looking for?.
Once your monitor is in place, you can tilt it forward and backwards, but within limits. Above are the maximum positions you can reach. Volta Cinema told me that the mounting screw hits the monitor mount and limits its orientation so that your monitor doesn’t fall on your lens or camera rig.The motor control settings page if you have a follow focus attached to your monitor.
Another piece of accessory is the GDU Side Mounting Bracket for Komodo priced at $39. The bracket is reversible and it can mount on either side of the camera for mounting handles and other accessories. It includes multiple 1/4″-20 threads as well as three 3/8″-16 anti-twist threads. Every bracket includes two M4 screws to mount to the camera’s body. That’s quite a hefty amount of weight to carry all day long, but you can quickly move around the city (and stairs!) with only one bag.
However, I was a bit worried about a possible short inside my camera bag between the batteries and whatever metal object they could hit. Volta Cinema told me that:.By shopping at our partner’s store, you are supporting CineD through our buy links, as we get a small affiliate commission (at no extra cost for you) when a purchase is completed. Let’s take a look at the deals!.
PortKeys HS7T Metal Edition: all-metal design.The promoter reserves the right to amend these terms and conditions at any time and to amend or withdraw this promotion at any time. Not to be used in conjunction with any other offer. Pricing accurate as of 7th August 2020, CVP is using live exchange rate pricing converted from GBP currency. Currency exchange might affect amount payable.
Built-in monitoring tools include: 3D LUT monitoring, Waveform, Luma, Histogram, false color, Zebra, Peaking, Zooming, Audio Meters and so on.If you want to use this camera for live streaming, in a locked-down scenario which is not demanding in terms of dynamic range, it will work very well.
This means, that you cannot dig into the shadows – there is nothing there, only black.tell us who you are, what you do, what you enjoy writing about most – and why you think this is something for you.
Edit: just after completing this review, Z CAM introduced a new firmware update (V 0.88) featuring ZRAW (internal RAW capture, partial debayer, supports up to 4096×2160@30fps initially). We might take a closer look at this ZRAW firmware in the near future.Full-frame 12MP sensor, UHD in up to 120P, Full HD in up to 240p, all modes available in 10-bit 4:2:2 internally, no overheating, (almost) no crop, flip-out screen, full-size HDMI… This camera seems to tick a lot of boxes.
However, I found the small dividers not high enough. When you have small items (batteries or memory cards, for example) in a tiny space separated by a partition, they tend to move around in your bag, get out of their dedicated space, and end up hitting other items inside the bag.PortKeys, a company specialized in HDMI and SDI field monitors, has just announced a new Bluetooth Module for their PortKeys BM5 field monitors. This add-on accessory screws directly to the back of the BM5 and allows you to control your BMPCC 4K/6K cameras wirelessly. Let’s take a closer look at it!.
The battery charger has a micro-USB port.FEELWORLD F7 PRO back view. Source: FEELWORLD.
At the back, you’ll find the rubber eyepiece with a +8/-3 diopter adjustment. Inside is the 0.7″ 1080P OLED display.The PortKeys P6 is a lightweight – 0.28lbs/130grams – entry-level monitor for filmmakers looking for a compact on-camera display. The P6 features an 8bit 5.5″ 1080P display with a 500nit brightness and 1000:1 contrast ratio. This monitor is much more affordable than their PortKeys BM5 that is a workhorse entirely made of aluminum – the P6 is made out of ABS plastic.
First, there are two small expendable pouches, one on each side. I have issues with this kind of tripod pockets most of the time, as they are small. To give you an idea, they barely fit a Peak Design Travel Tripod, one of the most compact camera tripods you can get.Make sure to check our hands-on and footage article as well as Philip Bloom’s two hour in-depth review of the camera. This bundle will get you the camcorder body with Sony 120GB XQD G-Series memory card and a spare Sony BP-U60 56Wh battery (another battery ships with the camera already).
The PortKeys LH5H is in-factory calibrated using an X-Rite i1 Display Pro colorimeter. The display should look as good as it can be right out of the box without further adjustments. If you have an i1 Display Pro prob, you can re-calibrate your LH5H yourself later down the road if needed.What do you think of this new PortKeys OEYE-3G EVF? Do you already use an EVF with your camera? Let us know in the comments down below!.
Not all monitors are created equal, and the quality of the display behind them may vary significantly. A great on-camera monitor must be as color accurate as possible and close to “what you see is what you get” as possible. If your monitor colors are incorrect, you won’t see your footage the way it’s supposed to be.PortKeys HS7T Metal Edition Released – 7” HDMI & SDI Monitor in a Tough Body.
These monitoring tools were also available in the previous version, but Portkeys improved its peaking mode, which looks easier to view now. A new “freeze-frame” tool is now available to capture a frame and use it as a reference/guide.These tools are pretty much everything you need to judge the image on an on-camera monitor.
Up to 50 custom 3D LUTs can be loaded into the FEELWORLD F7 PRO. Source: FEELWORLD.I tried the Manfrotto PRO Light Flexloader L in two primary configurations: a “traditional” camera bag and a multipurpose backpack.
Features of the Z Cam E2C Cinema Camera.Canon EOS C500 Mark II Bundle – €523,70 Savings.
The PortKeys LEYE is not the company’s first try at making an EVF. Indeed, last year, they released the OEYE-3G EVF with SDI/HDMI input ports and a very high 1080P resolution. The PortKeys LEYE is very compact, with dimensions of only 106 x 70 x 78mm. Most of the device is made of plastic, except for the metal rear cover.
You can immediately feel that it’s a well-made product out of the box. The materials look dense, the stitchings of the bag are perfect, the sewing thread is thick.A lot has been written about the FUJIFILM X-T3, and a lot of it here, on cinema5D. We’ve reviewed the camera (twice), and crowned it our best mirrorless camera of the year 2018. Currently, there is a nice discount on this camera in both B&H (including free accessories – memory card and bag) and CVP.
The BM5 support resolutions up to 1080p at 60 frames per second.Panasonic LUMIX G80/G85 Camera with 12-60mm Lens and Accessories Set – $300/€83 Discount Plus Free LUMIX 25mm f/1.7 Lens, Free 3-Year Warranty.
The monitor is color-calibrated out of the PortKeys factory, but you can adjust various settings like sharpness, chroma, brightness, backlight, display flip, tint, color temperature adjustments.Disclaimer: As usual, let me first say that I am not representing Volta Cinema in any way. Like with all our unbiased CineD reviews, Volta Cinema, or any other brand, did not pay me to write this article. However, the company sent me the product to review for free. This review is my unbiased opinion, as Volta Cinema did not modify, influence, or gave input about the article before its publication.
Cine 7 monitor + Bolt 4K Monitor Module 750 TX connected to the camera with ARRI license installed (If you are using 2 Cine 7 monitors you can have the license installed on either one.).Out of the box, the colors and images coming out of the are totally off. So it’ll take you some time to get something I would call acceptable. Most on-camera monitors are set at 6500°K, but even with multiple tweaks, I had to put the Black Mini to 7500°K and make some brightness/tint adjustments by hand to get in a somewhat accurate ballpark.
The functions you can control are pretty basic at the moment: start/stop the recording, change your ISO settings, adjust the focus settings…etc. I think this is just the beginning.B&H Buy link: DJI Osmo Action Was: $379.00 Now: $279.00 (Savings: $100.00).
As I mentioned, the Portkeys PT5 does not have any physical buttons, and all the navigation is via the touchscreen. I’m glad there are only pages, as it is relatively easy to operate and understand, but there are also some drawbacks like the numerous fingerprints the screen will accumulate.The Z CAM E2 also offers an HDR mode, where it captures a second image with an 8 times higher shutter speed for the highlighted part and merges it into one video frame (to increase the dynamic range by additional 3 stops).
Plus it offers Canon’s excellent Dual-pixel AF system. You can take a look at our 1DX Mark III review to know more about it. This set also includes the Canon 24-70mm f/2.8L II EF-Mount lens and Sandisk 512GB 1700MB/s CFexpress card.The headphone volume output, image flip, OSD language/transparency.
Add the special promotion code at checkout.Camera control for KOMODO or DSMC2 installed on either one of the Smart 7 Monitors.”.
Also, I can’t say enough how comfortable the Flexloader L is on your shoulders and back. This is a crucial part of a backpack that will get as heavy as it can get once fully loaded.The EOS R is the first full-frame mirrorless camera from Canon. It features the new RF lens mount, and 30.3MP CMOS sensor along with a DIGIC 8 image processor. It tops at UHD 4K30 for video recording and the sensor also facilitates Canon’s great Dual Pixel AF system – probably the best autofocus system for video right now. The camera can shoot in Canon Log gamma for higher dynamic range and it can output 4K 10-bit 4:2:2 over HDMI.
There is a printed user manual in the box. It’s not very detailed, but it’s a good starting point if you need it.Next are the shoulder straps that do have two adjustments settings. The first one, like every backpack, is the length of each strap.
The PortKeys Universal Handle is in a pre-order stage at the moment for $299.00 until February 22. After that period, the price will be $399.00, and orders will begin to ship in March 2020. You can pre-order it on PortKeys’ website.PortKeys listened, and a new generation is now available with a power switch. If you have the previous version, you can contact PortKeys directly and they will provide you (for free) with everything you need to update your handle. If you want to learn more about the PortKeys KeyGrip, you can read our in-depth article here.
The motor control settings page if you have a follow focus attached to your monitor.There’s also a nice little pouch inside the bag, which is around 23 x 15 x 5cm/9 x 5,9 x 2in.
Did you like that review of the ? What do you think about one of the most affordable products on the market right now? Do you want to learn more about a camera monitor and want us to review it? Don’t hesitate to let us know in the comments below!. One SDI input and one HDMI input port. It can take video signals up to FullHD at 60 fps.
The design of the Portkeys PT5 is minimalistic, and I love it. It looks a lot like an Apple iPhone.PortKeys LH5P on the left, PortKeys LH5H on the right.
In addition, the Z CAM app essentially gives you full control over all the camera settings – very nice!.I got away with around 3 hours of battery life at the maximum backlight setting. To me, this is a decent battery life for an on-camera monitor powered by a small battery. However, if you do the maths, a big Sony NP-F970 battery could theoretically run the PT5 for more than 12 hours!.
The new PortKeys Bluetooth Module for BM5/BM5 II monitors screws directly to the back of the monitor. This update is especially exciting for BMPCC 4K/6K users. First, you will have access to the daylight/tiltable screen of the BM5. Second, you will be able to control your camera via the monitor wirelessly. The number of settings you can adjust via the BM5 is imposing; please see the full list below.Buy link: Canon EOS R5 Bundle Was: €5.321,89 Now: €5.091,22 (Savings: €230,68).
Like most on-camera monitors (the ones that are not OLED), especially daylight-viewable ones, if you crank up the brightness, the display tends to lift the image’s black parts. In short, blacks are not black anymore, but more on the grey side and the picture starts to be a little washed out.The FX9 is Sony’s new full-frame cinema camera. Announced in September 2019, it offers solid 10-bit internal recording modes, very good autofocus, audio, internal eND, and more.
The concept of a handle that can power your camera is not new, with products like the Soonwell PH70. However, I’m not too fond of products that have built-in batteries. It means that once you run out of battery, you have no way to pop a fresh battery pack and continue shooting. It’s a no-go for me in professional shooting conditions. B&H: Nikon Z 6 with FTZ Mount Adapter and Bag Kit – $547 Discount.
You probably got it; I’m not a huge fan of the monitor mount, it works ok, but it could be improved to make it perfect. To know more, check our Lab Test as well as Nino’s C300 Mark III review. This bundle will additionally get you a Canon 24-70MM F2.8L II USM EF-Mount lens and SanDisk CFexpress Extreme Pro 512GB memory card.
Atomos has just announced that the Atomos Ninja V 5″ HDR monitor-recorder will support ProRes RAW recording from the Z CAM E2. The Ninja V will be able to record 12-bit Apple ProRes RAW at up to 4K60p. We caught up with Dan Chung from Atomos to learn more about it.The screen itself is a WLED panel, which is a marketing term to say LED panel, so blacks should be nowhere near an OLED panel.
PL to RF Mount Adapter for Komodo. Source: KipperTie.There are several ways to attach tripods or light stands to the Flexloader.
A few days ago Jarred posted a short demo of the new version of RED CONTROL app on iOS. The app seems to be able to control the Komodo and provide image feed from the camera with very little lag.Buy link: Z CAM E2 4K Camera Body €1,982.67 (Free PortKeys BM5 Monitor).
The sweeping images we see on movie screen are first visualized by looking through a camera, but the second step before anything rolls is to view them through a larger monitor.Canon EOS C300 Mark III Bundle – €521,27 Savings.
Any Smart 7 Monitor + Bolt 4K Monitor Module 750 TX connected to the camera with any necessary camera control cables.Video Plugins are available for only $89 (Was $179). FilmConvert Nitrate Bundle is available for only $129 (Was $249). Sale runs from Monday November 25 until Cyber Monday, December 2.
Beyond the listed tools you can also add up-to 30 selectable LUTs into the EVF. Backlight settings from 0 to 100.
The FEELWORLD F7 PRO can host a wireless video transmission system on the back. Source: FEELWORLD.Codec wise there are H264 and H265 10bit internal recording options to SD cards, but as a big differentiator to other cams in this price bracket, it offers to record ProRes via USB-C to an external SSD drive.
The user interface of the PortKeys LH5P is not its most significant strength, to say the least. When I purchase or review a product, I never read instructions (like most filmmakers, I am assuming), which means a product must be intuitive. I think you should be able to give a monitor to any camera assistant and everybody must be able to make it work without reading a book. That is not the case with the LH5P.Brightness, contrast, chroma, sharpness, tint.
With a very affordable price of $399, this entry-level electronic viewfinder filled a hole in the market. And, if you have a camera without a built-in EVF – like the Canon EOS C70 or Sony FX3 – it could have been the perfect solution.Next, I was curious to see the dynamic range of the Z Cam E2C (have a look here to see how we measure DR).
This is a design choice, and after using it, I get why they did it that way. I would like to have the option to close it if I’m shooting in tough weather conditions. It would protect the handle and prevent dust/rain from getting in.First of all, the two Allen screws are not imperial, which is arguably more often used in the filmmaking world; they are metric-standard. Next, the screws were so tight I thought I would break them before even using the monitor mount. I had to put the round piece in a vice to unscrew these two screws finally. That’s not cool, but everything is in place, so let’s install it on the top handle!.
The first bundle includes the full-frame mirrorless camera from Panasonic – the LUMIX S1 (our Review, our Lab Test). With its 24.2MP sensor, the camera can record up to 4K 60P cropped or 4K 30P uncropped video. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO. It even became our camera of the year in 2019. The bundle further includes the Sigma MC-21 adapter and Sony 120GB XQD G-Series memory card. Function settings page where you’ll find all your monitoring tools.
To know more about the video capabilities of this camera, you can take a look at our Canon EOS R review. If you would like to use the EOS R as a B-camera to the Canon C200, check our article on the topic.The batteries are best isolated from one another when traveling as long as there are other metallic components in the compartment. We haven’t yet experienced a short after months of use. They have short circuit protection, but as you know, in case it does happen it requires the user to connect them to the charger in order to restore them.
Home
Community
☰
