Having excellent and accurate monitoring tools to evaluate what you’re shooting is great, but the image quality of a monitor is more crucial. Not all monitors are created equal, and the quality of the display behind them may vary significantly.However, if we do some maths: the LEYE II draws around 3W max, a Canon LP-E6N battery has an 1800 mAh capacity and a 7.2V voltage, so you should get a little over 4 hours of runtime (V x Capacity / P = 7.2 x 1.8 / 3) with one battery, which is fantastic.
The PortKeys LH5P is a 5.5″ monitor that came out in January 2021. This 1700nit monitor features an HDMI input and an HDMI output port, and it supports resolutions up to 4K DCI. With a very aggressive price tag under $400, this small on-camera display can even control your camera wired or wirelessly. Let’s take a closer look at it!.There are two little charging indicators on top of the Volta36 battery charger that goes from red (charging) to green (charged).
Camera control for KOMODO or DSMC2 installed on either one of the Smart 7 Monitors.”.On top of the P6, there are four control buttons to quickly access your favorite functions, an On/Off switch, and four buttons to navigate through the menu. To mount the monitor on your camera, there is a 1/4 20″ mounting point at the bottom and one on the right side.
However, and this is something to keep in mind while you’re reading this entire review, the is only $89, and it’s an entry-level on-camera monitor. At this price point in the filmmaking world, you usually can’t buy many products, especially monitors or products with any electronics inside.The PortKeys P6 is a lightweight – 0.28lbs/130grams – entry-level monitor for filmmakers looking for a compact on-camera display. The P6 features an 8bit 5.5″ 1080P display with a 500nit brightness and 1000:1 contrast ratio. This monitor is much more affordable than their PortKeys BM5 that is a workhorse entirely made of aluminum – the P6 is made out of ABS plastic.
However, the batteries and the top handle both have a “V” sticker on them that indicates which direction you’re supposed to put the battery inside the handle. It only took me three shooting days before all of the stickers disappeared. Volta told us:.Sony a7R III Camera Body with Free Accessories Kit – $300/€195 Discount.
The currently retails at Amazon for $89 with the following Y2DWYGBM code. This special offer ends on October 5th,2021, at 23:59 PDT.The display uses WLED backlight technology, and the panel itself has a contrast ratio of 1000:1. It is worth mentioning that the PT5 has a 10-bit (8+2 FRC) display, so not “true” 10-bit, even if very few monitors are real 10-bit.
The Z CAM E2 in Conjunction with the Portkeys BM5 Monitor.A monitor of this size and weight makes a lot of sense to use with a small and lightweight battery, like a Canon LP-E6 pack, which is around 50 grams. Indeed, for example, a Sony NP-F 970 battery is 350g, which is twice the monitor’s weight; it looks a bit ridiculous. Also, Canon LP-E6 batteries are the same I use to power my Canon EOS R. I only have to use and carry one type of battery on set.
introduction to our wide network of fellow filmmakers and bloggers.When the monitor is switched on, you can adjust various display settings inside the menu, including:.
The PortKeys LH5P retails for $399.00/€449.00, and it is available now. Compared to other options in the market, I’ve been really impressed, and it’s a solid daylight-viewable on-camera monitors for under $400 if you don’t need SDI input/output ports.CVP Buy link: FUJIFILM X-T3 Camera Body Was: €1,314.19 Now: €1,041.41 (Savings: €272.78 including Cashback).
Last week, we were the first to report about a new company named PortKeys and their BM5, a field monitor capable of controlling your camera. Ahead of NAB 2019, the company just announced another exciting product, the OEYE-3G EVF. Let’s take a look at this exciting new EVF.Panasonic sells the same camera as G85 in the USa and G80 in Europe, so don’t get confused. This set with the LUMIX 12-60mm f/3.5-5.6mm lens offers great value for the price. B&H offers free accessories (spare battery, memory card, and camera bag) with the purchase. CVP offers free LUMIX 25mm f/1.7 lens (!), and free 3-year Panasonic LUMIX warranty.
In total, you can put up to twelve monitoring tools on the sidebars. Then, when you’re set, all you have to do is press an icon to enable/disable this tool. In addition, you can long-press on a shortcut to change it or remove it from the side.Our European partner online shop CVP based in the UK decided to celebrate the site relaunch with us and they prepared some great special deals exclusively for our readers. We asked them to include current popular cameras in the bundle so that all the offers are relevant.
Build quality and mounting points.Unfortunately, as you can tell, there is no anamorphic de-squeeze option.
Wireless video – plate on the back.It is entirely usable in bright daylight conditions, but the battery life will take a severe hit. You can see what you’re shooting, sunlight’s reflections are not bad, but I wouldn’t judge my exposure by just looking at the picture without any monitoring tools (and I guess you shouldn’t do that with any monitors anyway).
B&H Buy link: Panasonic LUMIX GH5 Camera Body with accessories set Was: $1,997.99 Now: $1,297.99 (Savings: $700.00).Last but not least, you can power the PT5 via the 5V1A USB input/output port. You can use this port to power the monitor with a power bank, for example, but also to charge your camera/power your accessories if you power the PT5 of a Sony NP-F/Canon LP-E6 battery.
Just like the original F7, the PRO version is packed with the most common monitoring tools to precisely control your image. These tools can be displayed independently or in an all-scopes mode.As I mostly shoot as a one-man-band filmmaker, I’ve been trying to create one rolling bag and one backpack shooting kit that fits everything I need for all basic shooting scenarios and talking heads: two cameras, lenses, two camera tripods, some LED lights, light stands, and so on.
In addition to that, we are also looking for a writer who is particularly interested in “smartphone filmmaking” as we are planning to greatly extend our coverage in that area. Both news about new smartphone cameras and apps as well as reviews of these cameras are important for us.In addition to that, we are also looking for a writer who is particularly interested in “smartphone filmmaking” as we are planning to greatly extend our coverage in that area. Both news about new smartphone cameras and apps as well as reviews of these cameras are important for us.
Two ways to mount the EVF on your camera/rig: a built-in NATO rail and three 1/4″-20 mounting points with ARRI locking pins. All the mounting options are at the bottom of the LEYE II. From what I saw, it looks like the system is very responsive and not laggy at all. This is good news for all RED Komodo users, who now have another affordable option for wireless camera control via an onboard camera monitor.
Did you like any of our deals? Did we miss something interesting? Let us know in the comments underneath the article.All the professional tools that you might need to monitor your image are still available, including support of 3D LUTs as well as Histogram, Zebra, False Color, De-Squeeze, and Zooming functions. Moreover, PortKeys claims that a new peaking algorithm will make focus pulling easier with this monitor, even though they do not thoroughly explain how.
As I already mentioned, the screen is hard to see if you’re shooting outdoor. But, on a cloudy day, it can get the job done with the included sun hood. … and smartphone filmmakers / content creators.
B&H Buy link: Canon EOS R Camera Body with Accessories Kit Was: $2,299.00 Now: $1,799.00 (Savings: $500.00).When the PT5 is up and running, you can adjust various display settings inside the menu, including:.
Any Smart 7 monitor + Bolt 4K Monitor Module RX on the remote monitor for wireless control”.I was also pleased to find a printed user manual (finally!) with everything you need to know to get started and navigate through the menus.
Disclaimer: As usual, let me first say that I am not a Portkeys Ambassador. Like every other article on CineD, Portkeys, or any other brand, did not pay us to write this article. However, the company sent us the product to review for free. This review is my unbiased opinion as Portkeys did not modify, influence, or give input about the article before its publication.SDI, HDMI and USB inputs are all available on the OEYE-3G as well as both SDI and HDMI outputs. You can send 4K DCI signals at 24 frames per second through the HDMI or 4K UHD at 24/25/30 fps, but the SDI input port is only able to accept 1080P signals at up to 60 fps. The HDMI and SDI ports allow for cross conversion as well.
I like the new dividers that don’t make you lose a ton of space inside the bag. When you’re packing your camera equipment for a trip, you want to pack as much stuff as possible inside your carry-on backpack. PortKeys EVF OEYE-3G – 1080P OLED – First Look.
As I mentioned previously, the PortKeys LH5P has one 1/4-20″ mounting point at the bottom. This is the monitor’s only mounting point, which is a bit of a letdown. I like to have multiple options for rigging a monitor to my camera, at least one on the left or right side and one at the bottom. There is nothing but an exhaust vent on the monitor’s right side, so I guess it would have been probably possible to put another mounting point here.Gimbals, Tripods, Monitors, Wireless Video, ….
The only thing that prevents it from slipping out of the handle is the battery cap (if it ever moves.) Update: Volta Cinema told us that the monitor mount comes with a small m3 screw in the box, that is used to secure it tightly to the handle, as the monitor mount is not meant to move around in any way.The monitor mount is decently made; it’s mainly made out of aluminum.
Finally, there’s a 5-pin “aviation” power input/output port, as PortKeys calls it. You can use the included D-Tap to 5-pin power cable to power your monitor from a V-Mount/Gold Mount battery. Also, you could use the included 5-pin to barrel connector cable to power accessories, but I did not try it. According to the company, this port can feed a 7.4V camera accessory if you power the monitor with a Sony NP-F battery.Once your monitor is in place, you can tilt it forward and backwards, but within limits. Above are the maximum positions you can reach. Volta Cinema told me that the mounting screw hits the monitor mount and limits its orientation so that your monitor doesn’t fall on your lens or camera rig.
Back then it was hampered by a weak codec (Full HD, AVCHD in 17Mbps) and the max. usable ISO value was 400, but the Voigtlaender lenses gave it the full frame look (e.g. the 25mm f0.95), and the hack of V. Kiselev at a later stage improved the bitrate to a stable 25Mbps. All in all, I loved the images – so much that I never sold it…. Panasonic LUMIX S1 Bundle – €245,57 Savings.
Portkeys has just launched a new lightweight 5″ on-camera monitor: the Portkeys PT5. This monitor can take HDMI input/output signals at up to 4K DCI at 24p or 4K UHD at up to 30p, it has a maximum brightness of 500 nits with all the monitoring tools you need to control your image properly, and it retails for only $169. So let’s take a closer look at Portkeys’ most affordable monitoring option yet!.Let’s be clear, this new Portkeys BM5 III WR is not a massive upgrade over its predecessor, and most of the main features are the same, including:.
Z CAM E2 Cinema Camera in the Wild – Hands-on Review.If you have a professional video tripod with a fluid head or light stands, you have another option on both sides of the Flexloader L.
At the back of the Black Mini, there is a built-in Sony NP-F and Canon LP-E6 battery bracket, similar to the one found on the Portkeys PT5 that I already reviewed. To use a Canon LP-E6 battery, simply slide it to the left.Music for the above video is courtesy of MusicVine. Get 25% off your next music license with code C5D25 (valid for one use per customer).
Let’s be honest, this plastic sun hood will not get you very far, especially as one of the sides is open. It is hard to put inside the bracket, it barely fits, there are light leaks from all sides… So you have it, it’s not the best design in the world, but at least they give you something that can help a bit.The Portkeys PT5 comes in a little case with a sun hood, one HDMI to HDMI cable, one HDMI to micro HDMI cable, a sunshade, and a cold shoe monitor mount with locating pins. Portkeys is very generous on this one.
First and foremost the Z CAM facebook group is worth mentioning, the spirit of conversation is very good and people from Z CAM as well as visitors are helpful, including the CEO Kinson Loo who answers questions very often himself.Panasonic Lumix G9 Camera Body – $500/€159 Discount, Free Accessories, Free LUMIX 25mm f/1.7 Lens, Free 3-Year Warranty.
Indeed, the Flexloader L comes with a built-in TSA lock that allows you to securely close your bag when you’re commuting, for example.I’m currently finishing our review of the PortKeys LH5H that will be released very soon, so keep an eye on CineD if you want to learn more about these affordable on-camera monitors.
PortKeys is a Chinese company specialized in creating monitors and viewfinders. We first reported about their PortKeys BM5 monitor, a 5-inch field monitor with SDI/HDMI input and output ports capable of controlling your camera. Then, the company released the OEYE-3G and LEYE EVFs, a Universal Handle that can control nearly every camera, and more recently, the PortKeys LH5P that we’re reviewing here.B&H Buy link: DJI Osmo Action Was: $379.00 Now: $279.00 (Savings: $100.00).
Also, Atomos announced the development of a touch-screen camera control on the Ninja V for ALL Z CAM cameras. This control function is similar to what the PortKeys BM5 can already do.Portkeys recently released a lightweight and very affordable 5″ on-camera monitor: the PT5. With a maximum brightness of 500 nits only, I was curious to see how this HDMI-only monitor performs. Here are my findings.
you have the time to write regularly – people with full-time jobs should check if they can find the time to write regularly.Up to 50 custom 3D LUTs can be loaded into the FEELWORLD F7 PRO. Source: FEELWORLD.
Also, there is a USB Type-A port on the right side of the monitor that you can use to power the PT5 via a power bank (5V/2A). If you power your monitor with a Sony NP-F or Canon LP-E6 battery, this USB port doubles as a 5V/1A power output that could easily charge your smartphone at the same time.False Color, Zebra, Underscan, Histogram, Waveform, 3D LUT.
PortKeys, the company specialized in HDMI and SDI camera monitoring solutions has just released its latest 5.2″ monitor that is capable of controlling your camera: the PortKeys LH5H.In short, these new dividers take less space inside your bag, so you have more room to store camera equipment.
The LEYE SDI will retail for $549/€500. It is already listed on our partners’ websites B&H and CVP, so it should be available very soon!.Finally, when grading the footage of the Z Cam E2C in DaVinci Resolve using the official Z CAM LUT’s from their webpage (I used the zlog2_LC709A_64_noGain_normal LUT) I noticed very yellowish skin tones – see the image below.
CVP Buy link: Panasonic LUMIX G9 Camera Body Was: €1,100.86 Now: €941.78 (Savings: €159.09, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).One SDI input and one HDMI input port. It can take video signals up to FullHD at 60 fps.
The comes in a compact cardboard box. Nothing exciting so far. Once you open it, everything is neatly packed, with no space wasted. It’s the kind of box that is impossible to re-pack once you’ve opened it and taken the products out. Interestingly enough, the monitor doesn’t come with a case to store it in.The left side of the Portkeys PT5.
The same type of battery can be used for the Portkeys BM5 monitor as well which is a big plus, and I needed all the spare batteries for the monitor, as its power consumption was quite high.Pricing and Availability: The price for the OEYE-3G EVF is $1,199.00 and the device is expected to ship in early May.
I did a quick test with a DJI Ronin RSC2 that barely fits inside this pocket.In a camera bag configuration, I was able to fit:.
CineD has become one of the most successful video camera gear reviews & news websites in the world over the past decade, and we are only getting started. We need more CineD writers.While the BM5 features every tool you need nowadays, this is not what caught my attention. What’s impressive is the “camera remote” port and the remote camera functionalities.
3D LUT monitoring and 3D LUT SDI output.One full-size HDMI to mini-HDMI cable.
However, Volta Cinema is a small team with only Tudor and his friend Oskar Woinski doing everything with love and passion. In that sense, you can’t judge and compare the product from a startup like a product from the big players of the filmmaking industry.The charger uses a standard micro USB PCB, and it can be charged with a plethora of devices, including wall plugs and power banks. To maximize the charging speed, it requires a minimum of 2.1A 5V connection.
5″ Monitor Review – An Entry Level Monitor for $89.The PortKeys LH5P is the big brother of the LH5H, and both monitors have a lot in common, including:.
Canon EOS 5D Mark IV Camera Body with Accessories Kit – $600 Discount.As you can tell, these are minor issues and not a dealbreaker. Manfrotto did a great job at improving their camera bag lineup and they’ll have a hard time competing with themselves for the next generation.
The PortKeys LEYE electronic viewfinder was first announced back in November 2020. This 4K HDMI-only EVF had a nice and compact form factor (106 x 70 x 78 mm) for a weight of 300g. In addition, the LEYE features a 2.4-inch display with a resolution of 1440 x 900, and can take signals up to 4K at 30 frames per second.The Z CAM E2 features a micro 4/3″ WDR CMOS sensor (19mm x 13mm). There is a Micro Four-Thirds lens mount.
Once you switch the power button on, the monitor takes around five seconds to boot up until it is operational.The PortKeys BM5 camera remote functions are compatible with the Z Cam E2, Sony/Canon/Panasonic cameras. Full list below.
FEELWORLD F7 PRO Released – Affordable 7” Director’s Monitor.To me, the Manfrotto PRO Light Flexloader L shines as a multipurpose backpack. To give you an idea, I was able to fit:.
Another feature is a gigabyte ethernet connection for control of the camera and live streaming. The WIFI (with the included antenna) of the cam allows the use of the Z CAM app that features a full-screen image view – essentially, if you accept some lag (see the video above) you can use your smartphone as a monitor.introduction to our wide network of fellow filmmakers and bloggers.
Indeed, a great on-camera monitor must be as color accurate as possible and be as close to “what you see is what you get” as possible. If your monitor colors are not correct, you won’t see your footage the way it’s supposed to be. For example, when a monitor’s colors are wildly inaccurate, you can see orange when you’re supposed to see yellow or red. It can affect how you’ll set your camera’s white balance or exposure, for example.The clever location of the Z CAM E2 battery allows the use of standard Sony NPF batteries with various capacities (and protects the HDMI port at the same time). For my trip I took a few 5200mA (NP F750) ones with me – good news is that power consumption was surprisingly low hence battery life was no issue at all.
The Z CAM E2 uses a dual ISO sensor, so I also tested the second gain value of ISO 2500 and got a result of 10.4 stops (SNR = 2).Canon EOS C300 Mark III Bundle – €521,27 Savings.
In short, these new dividers take less space inside your bag, so you have more room to store camera equipment.Sony: A9, A7 II, A7 III, A7 IV (from their website – yes, this camera doesn’t exist yet!), A6000, A6300, A6400, A6500, RX100, RX02.
The screen has a viewing angle of 180°, a contrast ratio of 1200:1, and a peak brightness of 500 nits. This level of brightness is a little disappointing since it’s way too low to make the monitor usable under bright sunlight. Moreover, it only represents a 50-nits increase over the original F7.B&H Buy link: Panasonic LUMIX GH5 Camera Body with accessories set Was: $1,997.99 Now: $1,297.99 (Savings: $700.00).
The next bundle includes the newer flagship full-frame mirrorless camera from Panasonic – the LUMIX S1H (our Review, our Lab Test). The camera can record up to 6K 30P or a wide range of 4K modes. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO.In total, you can put up to twelve monitoring tools on the sidebars. Then, when you’re set, all you have to do is press an icon to enable/disable this tool. In addition, you can long-press on a shortcut to change it or remove it from the side.
adding a handle at the bottom of the bag.The design of the is quite simple, even though it has strong bezels around the display. The monitor’s dimensions are 5.12 x 3.35 x 0.71in / 130 x 85 x 18mm for a weight of 196g / 0.43lbs. It is not the thinnest nor lightest monitor, but it is okay.
On the PortKeys LH5P, there are one HDMI input port and one HDMI output port. The monitor supports a maximum input resolution of DCI 4K at 24p, 4K UHD at up to 30p, and FullHD at up to 60p. I tested all three with a Panasonic GH5 and did not get any issues, may it be on the input or output side.Indeed, the Volta36 batteries are 36Wh/5A batteries; that’s a lot of juice in such a small package. In the graph above, you can see the capacity to weight ratio compared to other battery solutions.
introduction to our wide network of fellow filmmakers and bloggers.The user interface of the PortKeys LH5P is not its most significant strength, to say the least. When I purchase or review a product, I never read instructions (like most filmmakers, I am assuming), which means a product must be intuitive. I think you should be able to give a monitor to any camera assistant and everybody must be able to make it work without reading a book. That is not the case with the LH5P.
The LH5P is powered via a Sony NP-F battery, but you can use the USB port to feed the monitor from a V-Mount/AB external battery as well as a battery bank.Edit: just after completing this review, Z CAM introduced a new firmware update (V 0.88) featuring ZRAW (internal RAW capture, partial debayer, supports up to 4096×2160@30fps initially). We might take a closer look at this ZRAW firmware in the near future.
B&H Buy link: Sony a9 Camera Body with Free Accessories Kit Was: $3,998.00 Now: $3,498.00 (Savings: $500.00).First and foremost the Z CAM facebook group is worth mentioning, the spirit of conversation is very good and people from Z CAM as well as visitors are helpful, including the CEO Kinson Loo who answers questions very often himself.
Chinese manufacturer Portkeys is well-known for creating innovative on-camera monitors and viewfinders with very aggressive price/feature ratios. For example, they recently released the Portkeys BM5 III WR that can control the RED Komodo and is now RED Approved. Also, I reviewed their Portkeys LH5P monitor earlier this year, a monitor under $400 can control your camera.Z Cam E2C rolling shutter for 4096×2160 25 frames per second: 36 [ms].
B&H Buy link: Canon EOS 77D Camera Body with Accessories Kit Was: $799.00 Now: $549.00 (Savings: $250.00).Now Z CAM is introducing three new cameras. The E2 S6 (Super-35 6K camera with a choice of MFT, EF or PL mounts) and two full frame models, with 6K and 8K sensors. (E2 F6 and E2 F8 with a choice of EF and PL mounts).
Bottom: one 1/4-20″ mounting point with locating pins.To install it, you have to open the battery compartment and slide the monitor mount in place. Then, close the battery cap, and that’s pretty much it. The fit of the monitor mount on the handle is very snug, and there are no ways to lock it in place.
These are very good results for a micro four thirds sensor, almost exactly the same as for the Panasonic GH5s (10.7 stops) and coming in second behind the other four thirds cinema camera rival, the Blackmagic Pocket Cinema Camera 4K, BMPCC4k, which has 11.6 stops of dynamic range in ProRes HQ.To know more about the video capabilities of this camera, you can take a look at our Canon EOS R review. If you would like to use the EOS R as a B-camera to the Canon C200, check our article on the topic.
According to Manfrotto, the Flexloader L can take up to eight lenses, a DSLR/DSLR with grip or Cinema Camera, a 16-inch laptop (27 x 2.5 x 46 cm/10.63 x 0.98 x 18.11in), a gimbal, a tripod, and more. So you got it; this backpack can take a lot of stuff. That also means carrying a lot of weight on your shoulders, but we’ll talk about that in detail later.You probably got it; I’m not a huge fan of the monitor mount, it works ok, but it could be improved to make it perfect.
Open the lock, put the main compartment’s zippers through it, lock it, and you can be sure that nobody will be able to open your backpack.Buy link: Canon EOS C300 Mark III Bundle Was: €13.967,33 Now: €13.446,06 (Savings: €521,27).
Canon EOS C300 Mark III has also been announced this year. It is a sucessor of one of Canon’s most popular cinema cameras ever – the C300 Mark II. The new generation offers an uncropped 4K120p video on the Super35 sensor as well as modular design, internal ND filters, and Dual-Pixel AF.One micro-HDMI to full-size HDMI cable.
Out of the box, the colors and images coming out of the are totally off. So it’ll take you some time to get something I would call acceptable. Most on-camera monitors are set at 6500°K, but even with multiple tweaks, I had to put the Black Mini to 7500°K and make some brightness/tint adjustments by hand to get in a somewhat accurate ballpark.B&H Buy link: Canon EOS R Camera Body with Accessories Kit Was: $2,299.00 Now: $1,799.00 (Savings: $500.00).
Also, another thing that surprised me is that the NATO locking mechanism doesn’t have a spring inside. It means that when you unscrew it, the part that moves doesn’t follow the locking screw, and you might have to move it by hand. This is something minor and not a dealbreaker, but a small improvement that could be made in the next versions.The R6 is one of Canon’s two newly introduced mirrorless cameras. It is the lower-resolution more-affordable sibling to the Canon R5. It offers internal 4K60p video in 10-bit with no crop and with AF.
According to Portkeys, the PT5 only draws 6W of power. To give you a rough idea, as these results can vary a lot depending on the age/state of your battery pack, I did a quick test with a fresh Canon LP-E6N battery pack (14Wh).The LEYE SDI will retail for $549/€500. It is already listed on our partners’ websites B&H and CVP, so it should be available very soon!.
You’ll find six pages at the top of the UI: monitoring tools, image setting, LUT, display tools, audio, markers, and settings.The next thing I’m a bit skeptical about is that each time you exit the menu and re-open it, you’ll always come back to the first page/first tool. That’s frustrating and I would like for it to stay – or at least have the option – on the same page/tool I just tweaked.
One HDMI input and one HDMI output port supports resolution up to 4K DCI at 24p, 4K UHD at up to 30p, FullHD at up to 60p.Also, the straps feature an adjustable torso height harness system.
The $399 price tag of the PortKeys BM5 is outstanding for a monitor with that much functionalities. The field monitor will be available end of April. We will add B&H buy links when it become available.The camera control settings page to control your camera.
The camera control settings page to control your camera.CVP Buy link: FUJIFILM X-T30 Camera Body Was: €827.09 Now: €680.96 (Savings: €146.13 including Cashback).
Disclaimer: As usual, let me first say that I am not a VideoGear Ambassador. Like every other article on CineD, VideoGear, or any other brand, did not pay us to write this article. However, the company approached and sent us the product to review for free.MZed Pro annual membership is available for just $199 (normally $299, save $100). Members get access to MZed library of 29 current courses plus new courses added regularly. The ourses can be downloaded using their new iOS app.
The right side of the Portkeys PT5.you have the time to write regularly – people with full-time jobs should check if they can find the time to write regularly.
According to the company, they had to use “an off the shelf 0.8A x1 or 0.6A x 2 PCB for the charger to sit within the Micro USB specification (2.1A x 5V = ~10W total, minus the loss in efficiency).” This results in long charging times. To fully charge two batteries, it took me close to eight hours.In terms of construction, the PortKeys BM5 is entirely made out of aluminum. In front of the screen, there is a toughened glass in to protect it against shocks. It weighs only 350g, which is relatively light for a rugged field monitor. The BM5 is daylight viewable with an impressive brightness of 2000 nits and a viewing angle of 178°.
Also, there are rubber pull straps at the end of some zippers that open “secondary” compartments.CVP Buy link: Panasonic LUMIX GH5 Camera Body Was: €1,182.68 Now: €967.65 (Savings: €215.03, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).
What do you think of this new PortKeys OEYE-3G EVF? Do you already use an EVF with your camera? Let us know in the comments down below!.B&H offers additional free accessories (SanDisk 32GB Extreme PRO SDHC UHS-I memory card, Corel PaintShop Pro 2020 ultimate license, and Ruggard Journey 24 DSLR shoulder bag).
Right side: a power switch, a USB Type-A port, and a 7-24V power input/output port with a barrel connector.A few days ago, we covered the release of the PortKeys HS7T Metal Edition monitor, with its most exciting feature being a plate on the backside of the device to host a wireless video transmission system.
It supports Teradek’s “Broadcast Mode”, which means that this one transmitter can communicate with an unlimited number of receivers. And it can also pair with their Bolt App for iOS and Android, which will allow you to tune the 5GHz transmission channel and monitor for interference.What is unique with the Volta Cinema Top Handle is that it is the first design I saw where you could swap batteries to use it infinitely if you have enough batteries. With very little information available on the Internet and no reviews yet, we reached to the company to see if it holds all its promises.
The PortKeys Universal Handle with the Z-Cam E2.Specs and Features for the 4K Monitor Module 750 TX.
Z CAM E2-M4 Bundle – €195,84 Savings.As far as specs go, the 4K Monitor Module 750 TX is no slouch. It features zero-delay 4K30p video, 10-bit 4:2:2 HDR video, and of course the titular 750ft of transmission.
However, I think that the Portkeys PT5 is more suited if you’re often shooting inside. For example, during corporate/interview shoots inside, it’s an excellent low-cost option that I had a blast using.This interesting bundle includes the newest APS-C mirrorless camera FUJIFILM X-T4 (our review). With its 26.1MP sensor, the camera can record up to 4K 60P uncropped video in 10-bit in F-Log. It offers nice ergonomics, good IBIS, and flip-out screen. The bundle further includes the 5″ 1000nit monitor/recorder Atomos Ninja V and SanDisk 128GB 300MB/s SDXC memory card.
Using a stabilized lens is a must – as I did for the sample footage (the Olympus 12-100 F4 IS Pro lens).The Z CAM E2 cinema camera is a great new addition to the line of micro four thirds cameras, and got so many things right in the first place – first and foremost the image (audio via the 3.5mm input leaves a lot to be desired though).
Also, there are a couple of strange things in the UI. For example, you can’t activate an aspect marker and the grid simultaneously since they’re on the same page, so you’ll have to choose between one of them at a time. The same goes for the waveform; you can’t activate the RGB and Luma waveform simultaneously. This is a bit weird, but you can get used to it.With a very affordable price of $399, this entry-level electronic viewfinder filled a hole in the market. And, if you have a camera without a built-in EVF – like the Canon EOS C70 or Sony FX3 – it could have been the perfect solution.
In essence, you could use your smartphone instead of a monitor if you accept some lag between the recorded and image view.The next bundle includes the newer flagship full-frame mirrorless camera from Panasonic – the LUMIX S1H (our Review, our Lab Test). The camera can record up to 6K 30P or a wide range of 4K modes. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO.
I used the LH5H for three months and a dozen shoots in various shooting conditions before writing this review. I can say that the image coming out of the LH5H and LH5P is excellent for the price, especially in an interior situation.Since May this year, I have been using the micro four thirds (MFT) Z CAM E2 and more recently now the Z Cam E2C cinema camera. The more expensive Z CAM E2 flagship model has very pleasing colors out of the box, a flat Z-Log2 profile and high frame rates (up to 4K 160fps) in combination with strong internal recording options (H265, ProRes) as well as anamorphic modes – a very well rounded offering.
This can seem quite simple. However, to access these pages, you have to swipe the monitor in various directions to go to the desired page. For example, for the System page, you have to swipe left. For the function page, it’s a swipe on the right. The Control Settings page needs a swipe down and a swipe up for the motor page. It’s not easy to memorize, and there’s no visual indication of the page you’re currently in. But it doesn’t end there.Nikon Z 6 is the first full-frame mirrorless camera from Nikon – it is the “all-arounder” within the new Z system. It features 24.5MP CMOS sensor and can record UHD 4K video at up to 30fps and full HD at up to 120fps – all in H.264. The camera can also output RAW signal via HDMI, so this could be the perfect camera to use with the Ninja V to capture in ProRes RAW.
For more information about the LH5H, you can visit PortKeys’ website here.First of all, the two Allen screws are not imperial, which is arguably more often used in the filmmaking world; they are metric-standard. Next, the screws were so tight I thought I would break them before even using the monitor mount. I had to put the round piece in a vice to unscrew these two screws finally. That’s not cool, but everything is in place, so let’s install it on the top handle!.
The PortKeys LH5P is available now for $399.00, and the package includes a straight to elbow DC power cable, one camera control cable, a safety box, and a USB stick with the instructions. The LH5H currently retails for $100.00 less at $299.00 and can be a nice option if you don’t need the extra aluminum toughness. For more information, please visit PortKeys’ website here.Portkeys recently released an updated version of its famous BM5 monitor that can control your camera: the Portkeys BM5 III WR. This new model features a bigger 5.5″ display with a maximum brightness of 2200nits. It has a built-in Bluetooth module to control your camera, and an implemented wireless camera control for the RED Komodo. Let’s take a closer look at it!.
The Portkeys BM5 III WR is available now for €517. When you order it, you’ll have to choose the correct control cable for your camera, if you want to control it wired. Internally, it can record to CFAST 2.0 cards in C4K and 4K UHD at up to 160 fps in H.265. In HD resolution, you can go at up to 240 fps in H.265. In Apple ProRes 4:2:2 10-bit, you can go at up to 60 fps. Finally, in ZRAW (partial-debayer), it supports C4K at up to 30 fps internally.
The user-interface consists of four “pages”:.The next bundle includes the newer flagship full-frame mirrorless camera from Panasonic – the LUMIX S1H (our Review, our Lab Test). The camera can record up to 6K 30P or a wide range of 4K modes. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO.
The new M-GUARD dividers are on the left, compared to the Roller Bag-70 dividers on the right.Control Any Camera with the PortKeys Universal Handle.
Also, and this is not particular to this monitor, but something I still don’t understand, is why manufacturers only put 1/4-20″ mounting points – thankfully with locating pins on the LH5P – at the bottom of their products.For example, when a monitor’s colors are wildly inaccurate, it can happen that you see orange when you’re supposed to see yellow or red. It can affect how you set your camera’s white balance or exposure, for example.
Then, you can clip the sun hood in the brackets, and you’re ready to go. The quality of this sun hood is okay, but I’m not sure it will last very long, and you’ll have to be careful with it.The Portkeys PT5 is passively cooled, so it does not have a built-in fan. Also, it means that the monitor doesn’t make any noise when it is on.
Second is to use the dedicated 7-24V power input port, which is ideal if you want to power it of a V-Lock/Gold Mount battery.The NATO rail ratcheting knob is not spring-loaded.
If you already have a PortKeys monitor – including the BM5, BM5 II, HH7, HS7T, OEYE-3G – the company just released several firmware updates on its website. Here are the firmware update details:.Finally, there are four functions buttons at the top of the monitor and a menu button plus scroll wheel to navigate in the menus.
Home
Community
☰
