The display has a resolution 1920 x 1080 resolution, with a maximum brightness of 500 nits. It is also a touchscreen display to navigate inside the menu. However, this brightness will fall slightly short in bright daylight shooting conditions, so I would not call it a daylight viewable monitor. Chinese manufacturer PortKeys has just introduced a new version of its famous HDMI-only compact electronic viewfinder: the PortKeys LEYE II. The LEYE II now features a built-in battery plate. Also, PortKeys has been teasing an SDI version of its viewfinder for quite some time now, which should be released soon. So let’s take a closer look at these!.
HDMI is much more common on DSLR and mirrorless cameras and SDI is much more common on larger cinema cameras. While HDMI can transmit both video and audio, it doesn’t have the ability to lock into a port like SDI does. On the other hand, SDI only transmits video information and not audio.Also, Manfrotto put two thick rubber reinforcements/locking holes on the front and one on each side to create a tuck-away strap system.
The Z CAM E2 follows the “brick” look – like the RED ecosystem – and you will need some accessories to make it work properly. Some third-party manufacturers have started to implement it in their development, like PortKeys with their BM5 that can control the camera.On the Portkeys PT5, here are the built-in tools:.
The battery charger has a micro-USB port, and I was a bit surprised that no charging cable was included. I reached to the company that told me:.Via LANC: Z CAM E2 F6 and S6, Blackmagic Ursa Mini, Ursa Broadcast, Pocket Cinema Camera 4k/6K, Sony FS5, FS7, FX9, C700 PL, C700 GSPL, C200, C100, C100 MARK 2.
Canon EOS 5D Mark IV Camera Body with Accessories Kit – $600 Discount.Canon EOS 77D Camera Body with Accessories Kit – $250/€156 Discount.
In a nutshell, the top handle can support most DSLR and mirrorless cameras, as well as cinema cameras, including the BMPCC 4K/6K, the RED KOMODO, and up to an ARRI Alexa Mini, which is impressive. Also, it should support most on-camera monitors and camera accessories, as long as they stay within the 7.2V/5A limit.For BMPCC 4K/6K users, you can even control your camera wirelessly. You don’t need the additional BT1 Bluetooth module with the LH5H, as it is built-in inside the monitor. It means that you can control your BMPCC 4K/6K wirelessly out of the box!.
To know more about the video capabilities of this camera, you can take a look at our Canon EOS R review. If you would like to use the EOS R as a B-camera to the Canon C200, check our article on the topic.Zoom, Peaking, Framing guides, Grids, Aspects, Anamorphic de-squeeze.
Camera Controls through the Monitor.Once you switch the power button on, the monitor takes around five seconds to boot up until it is operational.
Furthermore, these high-quality metal zippers pull straps are not here for the flex.In short, you got it, the PortKeys LH5P’s UI is a big step up from the previous archaic one, but I feel like it still needs some refinement and improvements to get it “right.” PortKeys could change this kind of thing via a firmware update, so I have no doubt they’ll put in the extra work to make it a great, easy to use, and pleasing UI.
Jarred’s other company Global Dynamics United (GDU) has been producing accessories for other RED cameras for a while already. The company now officially announced some previously teased special accessories for the RED Komodo.Optimize the ratio options in the guide function, automatically adapt the deformation function, and add three ratio modes of 1:1, 16:9, 6:19.
As I mentioned, the Portkeys PT5 does not have any physical buttons, and all the navigation is via the touchscreen. I’m glad there are only pages, as it is relatively easy to operate and understand, but there are also some drawbacks like the numerous fingerprints the screen will accumulate.For all ZCAM E2 models, the control interface adds AF/MF and touch focus enable button.
But there’s even more for BMPCC 4K/6K users: The LH5P has a built-in Bluetooth module, which means you can connect your camera and monitor without the need for a cable. I loaned the monitor to a friend that has one, and it worked perfectly with his BMPCC 6K camera.payment is based on the amount of articles written and on success and reach (not a full time employment, it’s supplemental income but has the potential to become a considerable sum that you can profit from long-term).
However, I’ve been able to try the camera control features with my Panasonic GH5, and it worked flawlessly. I’m not a massive fan of big camera setups with tons of cables, so I tried it to see if it work, but I don’t see myself using it. It’s nice to have these camera control capabilities; it works perfectly fine, it’s great to have it, and I’m sure it’ll fit a lot of filmmakers’ shooting style.However, on-camera monitors are not your traditional computer display. Most of the time, you can’t use a probe or spectrophotometer to adjust your on-camera monitor.
Pretty much every tool you need is here to judge your image, except Zebras and a Vectorscope, but that’s already decent for an entry-level on-camera monitor.FilmConvert Black Friday 2019 Offer.
PortKeys, a company specialized in HDMI and SDI field monitors, has just announced a new Bluetooth Module for their PortKeys BM5 field monitors. This add-on accessory screws directly to the back of the BM5 and allows you to control your BMPCC 4K/6K cameras wirelessly. Let’s take a closer look at it!.Sony a7S III Bundle – €187,54 Savings.
Anamorphic de-squeeze, color temperature.On the PortKeys LH5P, there are one HDMI input port and one HDMI output port. The monitor supports a maximum input resolution of DCI 4K at 24p, 4K UHD at up to 30p, and FullHD at up to 60p. I tested all three with a Panasonic GH5 and did not get any issues, may it be on the input or output side.
Can you get more camera stuff inside? For sure, but that’s already a fair amount of gear to carry on your back. Inside the small pockets with tripod logos, you’ll find straps that attach to their respective rubber hooks.
I did a quick test with a DJI Ronin RSC2 that barely fits inside this pocket.When the monitor is switched on, you can adjust various display settings inside the menu, including:.
Not all monitors are created equally, and the quality of the display behind them may vary significantly. A great on-camera monitor must be as color accurate as possible and as close to “what you see is what you get” as possible.The exterior design of the PortKeys LH5P is not groundbreaking; it’s simple and quite minimalist. Now let’s take a quick tour of the monitor:.
I hope that in the next production batches, Volta will solve that with a permanent labeling or engraving technique. We’ll talk about the battery charger’s build quality and monitor mount a bit later in their dedicated sections.Also, dynamic range is limited to 10 stops and hindered furthermore by the fact, that the noise floor is cut off – hence, you cannot dig into the shadows to get that organic, flatter look – shadows are simply black with no information.
Among the people who got the first Komodo was Phil Holland and Philip Grossman. They both started posting first thoughts and answering questions about Komodo quite quickly. Phil Holland made a special thread on REDuser where he shares his findings on Komodo. Philip Grossman posted already several sample clips and comparisons with his RED Helium 8K on his Youtube channel.One SDI output and one HDMI output port with cross-conversion.
PortKeys LH5H – Ergonomics and Powering Options.From what I saw, it looks like the system is very responsive and not laggy at all. This is good news for all RED Komodo users, who now have another affordable option for wireless camera control via an onboard camera monitor.
The monitor mount was designed for use with the SmallHD 5 series and the Portkeys BM5 but it will work with most other monitors that have 1/4″-20 mount holes on the bottom of the monitor.The great thing about the BM5 and HS7T is that they are equipped with both HDMI and SDI inputs and outputs. 4K video signals up to 30fps and FullHD up to 60fps are supported over the HDMI, while the SDI connections only support 1080p signals up to 60fps.
Chinese manufacturer PortKeys has just introduced a new version of its famous HDMI-only compact electronic viewfinder: the PortKeys LEYE II. The LEYE II now features a built-in battery plate. Also, PortKeys has been teasing an SDI version of its viewfinder for quite some time now, which should be released soon. So let’s take a closer look at these!. Color Science of the Z Cam E2C Cinema Camera.
Make sure to check our hands-on and footage article as well as Philip Bloom’s two hour in-depth review of the camera. This bundle will get you the camcorder body with Sony 120GB XQD G-Series memory card and a spare Sony BP-U60 56Wh battery (another battery ships with the camera already).you’re getting your name out there to thousands of eyeballs, and we can link to your personal site from your name in the news and review posts.
However, Volta Cinema is a small team with only Tudor and his friend Oskar Woinski doing everything with love and passion. In that sense, you can’t judge and compare the product from a startup like a product from the big players of the filmmaking industry.Two antennas: one straight and one right angle antenna.
Music for the above video is courtesy of MusicVine. Get 25% off your next music license with code C5D25 (valid for one use per customer).The other part of the “proper” 3rd-party EVF market consists nearly entirely of Zacuto products. I will not mention the Wooden Camera modification kit for the Blackmagic URSA EVF. We recently reported about the new Zacuto Kameleon EVF, but they also make other EVFs like the Gratical Eye that we reviewed and the Gratical HD. These EVFs are amazing, full of features and build like tanks, but they are not cheap at all.
The PortKeys BM5 is daylight-viewable with a maximum brightness of 2000nit – the newest BM5 II monitor is 2200nit – and it is entirely made out of aluminum for a total weight of 350 grams.You got it; both monitors are very similar, so what’s new? One of the biggest caveats of the LH5H is its full-plastic construction. The PortKeys LH5P is built with aluminum alloy, which makes it more resistant to field life. Also, it looks slightly thinner than its predecessor, but the LH5P is heavier at 250g vs. 170g for the LH5H.
This monitor has its limits for sure, but it is an excellent monitor if you want to step up your game and start working with a product that offers professional monitoring tools.Yes, that’s right. Even the brand new Sony a7S III is included in this CVP special. The camera is supposed to start shipping in September 2020, but it already caused a lot of excitement.
The Z Cam E2C Cinema Camera (photo by Z CAM).Portkeys BM5 III WR Monitor Announced – RED Komodo Control.
Untouched (left) vs. tweaked (right) colors when applying the official Z-Log2 LUT to the Z Cam E2C footage. Skintones are yellowish, tweaks are needed (screenshot from Resolve).PortKeys HS7T Metal Edition: power options.
The menu itself is straightforward and well structured, also custom presents for the function buttons are available. However, some of the settings require deeper dives (changing the frame rate for example), hence doing that in the heat of the action does not work so well.Panasonic Lumix G9 Camera Body – $500/€159 Discount, Free Accessories, Free LUMIX 25mm f/1.7 Lens, Free 3-Year Warranty.
If you click on each tool in the menu, you can turn it on/off and adjust its settings. For each tool, you have various settings, including color, strength, magnification ratio, and so on.Unfortunately, we were told that this information which the manufacturer gave at the show initially, is unfortunately incorrect. The EVF cannot cross convert between HDMI and SDI, it can only output the signal via SDI if it receives an SDI signal, and the same is true for HDMI.
Finally, the Volta Cinema Top Handle has three 1/4″-20 mounting points at the handle’s back. The threading is really thin, and the metal is not thick here. While this is nice to have mounting points to store screws, I wouldn’t mount a camera accessory to it, even if I don’t see it breaking at all.What I always liked about the micro four thirds format is the possibility to adapt almost any lens, including the option to use a speed booster (0.71x). The speed booster allows the use of Canon EF glass for example, while at the same time increasing the light sensitivity by one stop.
Finally, on the top are three user-customizable buttons, a menu dial, and an exit button to control the EVF.System settings page to adjust the display, audio output, LUT, firmware update, and so on.
The PortKeys P6 is a lightweight – 0.28lbs/130grams – entry-level monitor for filmmakers looking for a compact on-camera display. The P6 features an 8bit 5.5″ 1080P display with a 500nit brightness and 1000:1 contrast ratio. This monitor is much more affordable than their PortKeys BM5 that is a workhorse entirely made of aluminum – the P6 is made out of ABS plastic.B&H Buy link: Sony a7 III Camera Body with Accessory Kit Was: $1,998.00 Now: $1,798.00 (Savings: $200.00).
Volta Cinema Top Handle real-life test. I loved how lightweight the PT5 is; it weighs nothing with a Canon LP-E6 at the back, so your camera rig stays easy to operate handheld.
The Volta Cinema Top Handle immediately caught my attention when I first saw it. From what I saw, I found this product brilliant, with a simple design and a clear mission: power your camera or accessories via the handle. Other companies have tried this, albeit arguably not as elegantly. Portkeys has just launched a new lightweight 5″ on-camera monitor: the Portkeys PT5. This monitor can take HDMI input/output signals at up to 4K DCI at 24p or 4K UHD at up to 30p, it has a maximum brightness of 500 nits with all the monitoring tools you need to control your image properly, and it retails for only $169. So let’s take a closer look at Portkeys’ most affordable monitoring option yet!.
On the Black Mini, there is only one HDMI input port. The monitor supports a maximum input resolution of UHD at up to 30p and FullHD at up to 60p. My findings are a bit different from the manufacturer’s claim of “4K 60Hz”, but it’s already pretty good.Then, a sub-menu will pop up at the bottom of the screen, and you can change your monitoring tools’ settings.
you’re still getting based on the reach of your “old” articles if you continue to write regularly for the site, it’s all very transparent – loyalty is welcome and awarded.By shopping at our partner’s store, you are supporting CineD through our buy links, as we get a small affiliate commission (at no extra cost for you) when a purchase is completed. Let’s take a look at the deals!.
You can use this pouch to store small items, filters, memory cards, cables, and so on.Is the Volta Cinema Top Handle perfect? Of course not, and like most products, it could be improved. But, I have mixed feelings about it. While the product feels incredible when you use it, many small details (the stickers, battery charger, monitor mount, etc..) make me a bit worried about its longevity.
A Sony NP-F-style battery powers it. Also, there is a power input/output port so you can power it off a V-Mount/Gold Mount battery or use the monitor to power your camera.It’s time to talk about my favorite part of the Flexloader L: the straps and back padding. The back padding is out of this world, and even with a fully-loaded bag that is close to 20kg, you’ll not feel it on your back, especially your lower back. It has a firm – yet so comfortable – padding with a mesh design and air tunnels, so you don’t sweat.
Various camera models/manufacturers are supported, giving you access to more or less camera control features depending on your camera. At the moment, here are all the supported models:.So, who is this monitor for? I guess the Black Mini is perfect for YouTubers or content creators who are mostly shooting inside. Also, if you’re doing many live streaming events and need a fast/affordable program monitor, it could get the job done.
CVP offers free LUMIX 25mm f/1.7 lens (!), free 3-year Panasonic LUMIX warranty, and free accessories with a GH5 purchase.CVP Buy link: Panasonic Lumix G9 Camera Body with 12-60mm f/2.8-4 Lens Was: €1,381.43 Now: €1,118.24 (Savings: €263.19, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).
The addition of this plate easily turns the F7 PRO into an affordable, compact director or 1st AC monitor. Furthermore, the vertical position of the NP-F style plate can be adjusted by loosening two screws in order to adapt to a wider variety of systems.In terms of input/output, you’ll find an HDMI input and HDMI output ports on the left side of the LH5H, as well as a 3.5mm jack output, but no SDI ports. The LH5H is an “entry-level” monitor, perfect for DSLR/Mirrorless camera users. If you need both HDMI and SDI ports, the BM5 II is more suited for you. Also, the PortKeys LH5H is made of plastic, not metal, with a weight of just 170g/0.37lbs.
However, the resolution of the LH5H is FullHD 1920 x 1080, and it can take 4K HDMI signals. In front of the screen, they use tempered glass to protect the monitor from scratches and the harshness of set life.On the , here are the built-in tools:.
To give you an idea, one of my Manfrotto Reloader Air-55 Pro zippers died two years ago. I sent it back, and they quickly sent me a brand new roller bag free of charge to replace it. That kind of service what professionals are looking for. DJI Osmo Action is still a relatively new product and it is the most serious contender to the GoPro. It is a very capable action camera with 4K 60fps video recording and brilliant stabilization. Even better then Hero7 Black’s HyperSmooth – here is our comparison of these two cameras. Make sure to also watch our Osmo Action review.
The bundle further includes the Sigma MC-21 adapter for Canon EF lenses and the 5″ monitor/recorder Atomos Ninja V. With the Ninja V, you can take advantage of recording in 12-bit ProRes RAW with this camera. In this price range, it is a very interesting combination.I did a quick test with a DJI Ronin RSC2 that barely fits inside this pocket.
PL to RF Mount Adapter for Komodo. Source: KipperTie.Another great addition is on the backside of the monitor. In fact, the new design includes a plate on the back of the screen to comfortably host a wireless video transmission system.
Open the lock, put the main compartment’s zippers through it, lock it, and you can be sure that nobody will be able to open your backpack.However, even if I found the UI easy to understand, there are some things I did not like. First, when you open the menu, it’ll stay open for a certain amount of time that you can adjust between 10 and 30 seconds. But when you’re done, you can’t exit the menu and hide it. Instead, you’ll have to let it disappear on its own without touching anything for 10/30sec.
B&H Buy link: FUJIFILM X-T3 Camera Body Kit with Accessories Was: $1,499.00 Now: $1,299.00 (Savings: $200.00).Atomos has just announced that the Atomos Ninja V 5″ HDR monitor-recorder will support ProRes RAW recording from the Z CAM E2. The Ninja V will be able to record 12-bit Apple ProRes RAW at up to 4K60p. We caught up with Dan Chung from Atomos to learn more about it.
This rolling shutter result of 36 ms is the highest I have ever measured in the lab. Compared to the very good 11.1 ms of the sister Z CAM E2 camera, it renders the E2C a very delicate candidate for handheld work.The biggest improvement over the old plastic version is, of course, build quality. In fact, the new PortKeys HS7T Metal Edition features an all-aluminum alloy, which makes the monitor stronger and more durable. Furthermore, this metal construction also helps with heat dissipation.
The monitor mount is decently made; it’s mainly made out of aluminum.Inside the small pockets with tripod logos, you’ll find straps that attach to their respective rubber hooks.
Portkeys PT5 5″ On-Camera Monitor.Filmmaking for Photographers with Philip Bloom is available for $149 (normally $199, save $50).
write one representative news post about a current subject of your own choosing that you would consider a “perfect fit” for our site (and which we haven’t written about yet). It can be either a classic news post of something current (example here), a review (like here) or a longer educational post (like here). Choosing the right subject and headline is almost as important as the proper content to go with it :-). Cine 7 monitor + Bolt 4K Monitor Module 750 TX connected to the camera with ARRI license installed (If you are using 2 Cine 7 monitors you can have the license installed on either one.).
The camera control settings page to control your camera.Bottom: one 1/4-20″ mounting point with locating pins.
This HDMI-only display features a brightness of 1700 nits, a resolution of 1920 x 1080 that can take 4K signals, basically all the monitoring tools you need, and the cherry on the cake: the LH5H can even power cameras that use Sony NPF-style batteries. Let’s take a closer look at this on-camera monitor on a budget!.I would say that it’s a nice and beautiful product that works as advertised, but there is a lot of room for improvements to make the user experience more “reassuring” and enjoyable.
What can you power with the Volta Cinema Top Handle?.As I already mentioned, there is a built-in Sony NP-F style battery plate at the monitor’s back. I did a quick battery life test with a Sony NP-F970 battery at maximum brightness (1700nit). I got away with around one to one hour and a half battery life.
All in all, it is a good monitor, but I didn’t like one detail: it only takes 1080p signals via HDMI, although the Z CAM E2 could provide a 4k signal. Hence, you have no good way to judge focus on the monitor itself for a 4k HDMI signal, as neither punching in (1:1 pixel view) nor the in – built focus peaking of the monitor would display this signal accurately.Now, let’s take a look at the top Black friday camera deals for filmmakers:.
At the back of the Black Mini, there is a built-in Sony NP-F and Canon LP-E6 battery bracket, similar to the one found on the Portkeys PT5 that I already reviewed. To use a Canon LP-E6 battery, simply slide it to the left.Fast forward 10 years and I have the new cinema camera Z CAM E2 from the Chinese manufacturer Z CAM in my hands. A micro four thirds camera capable of shooting 4k DCI using a LOG profile (Z-LOG2) recording ProRes HQ 10bit 4:2:2 internally up to 60fps (4k H265 up to 120fps, 160fps in 1:2.4 mode). Wow!.
Display, video signals and monitoring functions.Buy link: Panasonic LUMIX S1 Camera Body Was: €2,120.75 Now: €1,734.99 (Savings: €385.76 Cashback + Free 3-Yeatr Warranty).
Retail price is $1199, and the shipping date is set for May 1st. You can take a look at the PortKeys OEYE-3G EVF during NAB 2019, booth #C12030. We will add B&H buy links when it becomes available.Enabling WIFI on the Z Cam E2C allows a full-screen image preview on your smartphone using the Z CAM app.
Indeed, 1/4-20″ with locating pins mounting points are not “industry standard,” but 3/8-16″ with locating pins are. But, again, to me, Atomos did it right with their Ninja V/V+, and a lot of camera monitor manufacturers should follow the trend.The first batch of both accessories got sold out relatively quickly, the next batch should be shipping by the end of June.
The other part of the “proper” 3rd-party EVF market consists nearly entirely of Zacuto products. I will not mention the Wooden Camera modification kit for the Blackmagic URSA EVF. We recently reported about the new Zacuto Kameleon EVF, but they also make other EVFs like the Gratical Eye that we reviewed and the Gratical HD. These EVFs are amazing, full of features and build like tanks, but they are not cheap at all.This new OEYE-3G EVF is entirely made of aluminum and is pretty small, at just 180x 69.7 x 72.4 mm for a total weight of 400 grams.
One micro-HDMI to full-size HDMI cable. To know more, check our Lab Test as well as Nino’s C300 Mark III review. This bundle will additionally get you a Canon 24-70MM F2.8L II USM EF-Mount lens and SanDisk CFexpress Extreme Pro 512GB memory card.
Control Any Camera with the PortKeys Universal Handle.This is not that bad on the LH5P, and even at maximum brightness, the image remains viewable and usable. Keep in mind that this is a budget-friendly monitor, so comparing it to the big boys doesn’t make sense.
All in all, I’ve not been overly impressed by this monitor as I’m used to much higher-end monitoring options. However, every time I had complaints about the Black Mini, I always came back thinking, “well, it’s $89, so it has some caveats, but it’s usable.”.Back: the Sony NP-F/Canon LP-E6 battery plate and a battery release button.
There is a 3.5mm headphone jack if your camera doesn’t have one or if you want to monitor your audio signal directly from the Black Mini. The preamp is a bit noisy, but it works.I love the fact that it allows high frame rates, ProRes recording, and many more things. Z CAM is definitely a company to watch out for – also, I am curious to see their new APS-C and full frame cameras (S6, F6, and F8) that are scheduled to arrive later this year.
The functions you can control are pretty basic at the moment: start/stop the recording, change your ISO settings, adjust the focus settings…etc. I think this is just the beginning.The headphone volume output, image flip, OSD language/transparency.
Nothing broke; it still works perfectly. I secured the casing with some tape, so it stays as closed as it is supposed to be. However, I’m a bit worried about its longevity over time. I think that Volta Cinema could work on a better battery charging solution.The new PortKeys Bluetooth Module for BM5/BM5 II monitors screws directly to the back of the monitor. This update is especially exciting for BMPCC 4K/6K users. First, you will have access to the daylight/tiltable screen of the BM5. Second, you will be able to control your camera via the monitor wirelessly. The number of settings you can adjust via the BM5 is imposing; please see the full list below.
By shopping at our partner’s store, you are supporting CineD through our buy links, as we get a small affiliate commission (at no extra cost for you) when a purchase is completed. Let’s take a look at the deals!.The Portkeys PT5 has a glossy and quite reflective screen, so the included sun hood is a must if you plan on shooting outside (more on that later.).
The PT5 has a claimed maximum brightness of 500nit, which is not daylight-viewable like monitors with a brightness under 1500nit. It does not mean that you can’t use it outside with the included sun hood, but you’ll have a hard time in direct sunlight. The glossy display doesn’t help with that, but we’ll talk more about that later.Great monitoring tools, including 3D LUT monitoring, waveform, false color, zebra, peaking, zooming, audio meters, crosshair, framing guides, grids, aspects.
PortKeys Universal Handle – Construction.In this discounted set, along with the camera, you get SanDisk 32GB extreme PRO UHS-II SDHC memory card, Watson 2000mAh battery pack, Watson compact AC/DC charger for NP-FZ100 battery, and Ruggard Journey 24 DSLR shoulder bag.
In terms of direct comparison, the Soonwell PH70 battery handle retails for $279.00; it has double the Volta Cinema Top Handle’s capacity, but you can’t change batteries, and it is a lot bigger. Plus the Soonwell handle we have at our CineD headquarters can’t be turned on or charged anymore after it wasn’t used for about three months. For the price, it’ll be hard to beat the Volta Cinema option.Canon EOS 77D Camera Body with Accessories Kit – $250/€156 Discount.
Finally, of course, it’ll also be perfect for content creators on Twitch or other platforms that are doing video games live streams and don’t want/need all the bells and whistles from much higher-end on-camera monitors.Canon EOS Rebel T7i/800D Camera with 18-55mm Lens and Accessories Kit – $250/€126 Discount.
Regarding power, the BM5 uses a single Sony NP-F style battery. Like the SmallHD Focus monitor, you can use the power output of the BM5 to feed your camera via a dummy battery. On top of that, you have the option to power the monitor with an external battery by using the Lemo port on the monitor, and the included Lemo to D-Tap cable.Image Quality of the Z CAM E2 Cinema Camera.
The LH5P display is color calibrated by Portkeys out of the factory. The monitor is in-factory calibrated using an X-Rite i1 Display Pro colorimeter. In short, it should be pretty color accurate out of the box.PortKeys is also teasing a new version of the LEYE with SDI and HDMI input ports: the LEYE SDI. This version should also have a built-in Canon LP-E6 battery plate.
In terms of construction, the PortKeys BM5 is entirely made out of aluminum. In front of the screen, there is a toughened glass in to protect it against shocks. It weighs only 350g, which is relatively light for a rugged field monitor. The BM5 is daylight viewable with an impressive brightness of 2000 nits and a viewing angle of 178°.email hiring[at]CineD.com to apply.
In terms of comparisons, Zacuto’s cheapest EVF is $1950.The bundle further includes the Sigma MC-21 adapter for Canon EF lenses and the 5″ monitor/recorder Atomos Ninja V. With the Ninja V, you can take advantage of recording in 12-bit ProRes RAW with this camera. In this price range, it is a very interesting combination.
I was also pleased to find a printed user manual (finally!) with everything you need to know to get started and navigate through the menus.There is a 3.5mm headphone jack if your camera doesn’t have one or if you want to monitor your audio signal directly from the Black Mini. The preamp is a bit noisy, but it works.
When the Black Mini is up and running, you can adjust various display settings inside the menu, including:.One of the things I love the most about my PortKeys BM5 is its build quality. The aluminum alloy makes the monitor sturdy and reliable. Moreover, it is packed with professional features that come at an astonishing, affordable price.
Judging the brightness, color accuracy, or Delta E of the Portkeys LH5P with a spectrophotometer did not make a lot of sense. Indeed, numbers are just what they are: numbers. I prefer to judge a product by its feeling and the overall perception of an image.FUJIFILM X-T4 Bundle – €112.82 Savings.
To give you a rough idea, the PT5’s maximum brightness is slightly over the Canon EOS C70’s display, which is also hard to view in bright daylight conditions.Finally, on the top are three user-customizable buttons, a menu dial, and an exit button to control the EVF.
The Portkeys PT5 is a 5″ monitor with one HDMI input and one HDMI output port. Having HDMI loop-through is pretty impressive on a monitor at that price level. Both in and out ports support resolutions up to 4K DCI at 24p, 4K UHD at up to 30p, FullHD at up to 60p. Canon: 1D X Mark Ⅱ, 5DS, 5DS R, 5D Mark Ⅳ, 5D Mark Ⅲ, 5D Mark Ⅱ, 6D Mark Ⅱ, 6D, 80D.
The Portkeys PT5 has a glossy and quite reflective screen, so the included sun hood is a must if you plan on shooting outside (more on that later.).you can write well and you are actually enjoying it.
PortKeys listened, and a new generation is now available with a power switch. If you have the previous version, you can contact PortKeys directly and they will provide you (for free) with everything you need to update your handle. If you want to learn more about the PortKeys KeyGrip, you can read our in-depth article here.25% off ARRI Academy certified courses.
You can activate numerous monitoring tools at the same time to help you. I’m not sure if i’s a bug or something regular, but you can “only” activate two scopes at the same time between Luma Histogram, Luma Waveform, and RGB Waveform. You can’t start all three at the same time. However, you can activate two scopes and peaking/guides/grids at the same for example. All in all, monitoring tools are fine.The addition of this plate easily turns the F7 PRO into an affordable, compact director or 1st AC monitor. Furthermore, the vertical position of the NP-F style plate can be adjusted by loosening two screws in order to adapt to a wider variety of systems.
RED Komodo Update – First Cameras Shipped, Footage Samples, Accessories.Buy link: Nikon Z 6 with FTZ Mount Adapter and Bag Kit Was: $2,243.90 Now: $1,696.95 (Savings: $546.95).
Bottom: one 1/4-20″ mounting point with locating pins.FUJIFILM X-T3 Camera Body Kit with Accessories – $200/€272 Discount.
25% off ARRI Academy certified courses. Backlight settings from 0 to 100.
Cine 7 monitor + Bolt 4K Monitor Module 750 TX connected to the camera with ARRI license installed (If you are using 2 Cine 7 monitors you can have the license installed on either one.).Optimize the camera control interface and functions: improve the aperture display accuracy of BMPCC4K/6K. Fixes an issue where the BMPCC 4K resolution cannot be switched to 4K 2.4:1 4096×1720.
At the back of the monitor, there is a Sony NPF-style battery slot to power the monitor. As I mentioned, you can use the USB port to feed the monitor from a V-Mount/AB external battery as well as a battery bank.While planning a trip to the Indian jungle to film a short documentary about Pench National Park, my colleagues at cinema5d challenged me to leave my standard gear at home and take the new cinema camera Z CAM E2 instead – would it be up to the task?.
This means, that you cannot dig into the shadows – there is nothing there, only black.This does not allow an analysis via our standard IMATEST routines – because no RMS noise values can be calculated for the lower stops. Therefore we only have the waveform plot of the Xyla 21 stepchart as a reference. From the waveform, about 10 stops of dynamic range can be identified.
Once you switch the power button on, the monitor takes around five seconds to boot up until it is operational.The HS7T can be powered by two hot-swappable Sony L-Series batteries or via the 4-pin LEMO input (DC 7.4~24V). Moreover, the monitor can supply power for any wireless video transmission system attached to the back: a helpful feature when trying to keep the monitor setup clean and compact.
PortKeys LH5H Released – Affordable 5″ Monitor That Can Control Your Camera.The Volta Cinema Top Handle design is pretty “simple,” minimalistic, and I like its elegance. It consist of two main parts: the handle that doubles as the battery compartment, and a mount with the NATO rail and D-Tap port.
You can adjust the scale/position/settings of each tool via the touchscreen. However, you have to press the monitoring tool you want to change for a second and slide it to the side. I have to admit that this manoeuver is sometimes tricky, and it takes some time to get used to.Once you fully open the two main zippers, you access the 26.5L interior to store your camera equipment. The first thing you’ll notice is that the bag flap opens entirely. Some like it, while others prefer latches to prevent the flap from touching the ground; it’s a matter of taste.
One of the things I love the most about my PortKeys BM5 is its build quality. The aluminum alloy makes the monitor sturdy and reliable. Moreover, it is packed with professional features that come at an astonishing, affordable price.Fan speed (low/medium/high), volume output, image flip.
First Komodo accessory is the GDU Komodo Monitor Mount priced at $79. The mount sits between the camera and a monitor and provides forward and back tilt. According to GDU, a tension bolt system keeps the hinge tight across the tilt range and prohibits loosening during use.The first bundle includes the full-frame mirrorless camera from Panasonic – the LUMIX S1 (our Review, our Lab Test). With its 24.2MP sensor, the camera can record up to 4K 60P cropped or 4K 30P uncropped video. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO. It even became our camera of the year in 2019. The bundle further includes the Sigma MC-21 adapter and Sony 120GB XQD G-Series memory card.
We are Hiring New Writers – Apply Today!.In terms of weight, the monitor is 250 grams/8.8 oz without batteries. External dimensions are 144 x 114.8 x 28mm/5.5 x 4.3 x 0.7in without battery. Comparing the LH5P to some of its competitors, like the smallHD FOCUS 5, the PortKeys monitor is slightly heavier. However, with dimensions of 133 x 84 x 19mm/5.25 x 3.3 x 0.75in, Focus 5 is overall smaller, but it is 5″ vs. 5.5″.
GDU Komodo Accessories. Source: GDU.Also, I can’t say enough how comfortable the Flexloader L is on your shoulders and back. This is a crucial part of a backpack that will get as heavy as it can get once fully loaded.
Home
Community
☰
