B&H offers additional free accessories (SanDisk 32GB Extreme PRO SDHC UHS-I memory card, Corel PaintShop Pro 2020 ultimate license, and Ruggard Journey 24 DSLR shoulder bag).In 4k DCI mode (4096 x 2160) the crop factor of the Z CAM is about 1.9, using the speed booster gives a crop of 1.35 approximately.
Left side: one HDMI input port, one HDMI output port, and a 3.5mm headphone jack.Setting up the Z CAM E2 Cinema Camera for the Trip.
Like all PortKeys products, the LEYE features all the monitoring tools you need, including;.CVP Buy link: Sony a7S II Camera Body Was: €1,948.55 Now: €1,753.59 (Savings: €194.96 – CashBack).
“To set up wireless camera control for ARRI, the following hardware and software are required:. One full-size HDMI to full-size HDMI cable.
B&H Buy link: Canon EOS 6D Mark II Camera Body with Accessories Kit Was: $1,599.00 Now: $1,199.00 (Savings: $400.00).Apparently, this design is becoming quite popular. In fact, the new FEELWORLD F7 PRO has a very similar feature, which makes it a good director or 1st AC monitor on a budget. Let’s take a closer look.
And that’s it. It is not an overly-complicated bag with tons of zippers and pockets all over the place. Instead, Manfrotto decided to keep things simple, and it just works perfectly.Finally, there’s a 7.4/24V power input/output port with a barrel connector that you can use to power the PT5. Unfortunately, a D-Tap or any other powering cable isn’t included in the kit, but you can easily find one at an affordable price. Last but not least, this port can feed a 7.4V camera accessory if you power the monitor with a Sony NP-F/Canon LP-E6 battery, but I did not try it.
Adjust other parameters such as your project frame rate, codec, quality, off-speed frame-rate, and recording.I loved how lightweight the PT5 is; it weighs nothing with a Canon LP-E6 at the back, so your camera rig stays easy to operate handheld.
CVP Buy link: Panasonic LUMIX GH5 Camera Body Was: €1,182.68 Now: €967.65 (Savings: €215.03, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty). However, comparing the E2 to other cinema cameras in this sensor class the competitor BMPCC4k cannot be neglected. The BMPCC4k is significantly less expensive, has a large build in screen (5”) and allows internal ProRes as well as 12bit RAW recording (Blackmagic raw). Also, Blackmagic managed to squeeze out 0.8 stops more dynamic range.
The FEELWORLD F7 PRO is now available for purchase on the FEELWORLD website, coming at an affordable price of $239. FEELWORLD is also offering a discount during the first week of the release, when using the promo code FEELWORLD F7 PRO at the time of purchase. Included in the box are a Micro-HDMI Cable, a Sunshade, and a Mini Hot-Shoe Mount.Add automatic color calibration function: Supported devices Xrite i1DisplayPro.
The PortKeys Universal Handle is made out of milled aluminum frame wrapped with red oak around the handle. The design looks ergonomic and comfortable, and I love the sleek design and look of it. Also, it comes with a faux-leather strap for a better grip.The Volta36 batteries can’t be charged through the top handle, so it comes with a specific battery charger. As I mentioned earlier, the charger has a micro-USB port so that you can charge the cells via a USB wall adapter or even a power bank.
The FEELWORLD F7 PRO is an HDMI-only monitor. Source: FEELWORLD.You can get the gimbal inside the bag; it works. However, I’m not a massive fan of putting some stress on a motorized gimbal that will take some pressure from my back.
You’ll find a cold-shoe mount at the bottom of the monitor mount with a 1/4 “-20 threaded hole. The hex key is used to adjust the tension/friction of the tilt axis.The Manfrotto PRO Light Flexloader L’s design is sober; it’s light black with a couple of “Manfrotto signature red” touches here and there.
Most of the time, you can’t use a probe or spectrophotometer to adjust your on-camera monitor. It means that you’ll have a hard time trying to calibrate it correctly by hand with only a few built-in picture adjustment tools at your disposal in the menu system. In short, on-camera monitors must be as good as possible out of the box with minimal color adjustments needed by the end-user.I guess that most filmmakers will be covered. It is also possible to connect the LH5P to a Tilta Nucleus N/M wireless follow focus to pull focus via the monitor.
Framing tools: Check Field, Grids, Image Flip, Cross Hair.Also, Manfrotto put two thick rubber reinforcements/locking holes on the front and one on each side to create a tuck-away strap system.
Canon EOS Rebel T7i/800D Camera with 18-55mm Lens and Accessories Kit – $250/€126 Discount.CVP: Z CAM E2 4K Camera Body – Free PortKeys BM5 Monitor.
The new monitor has a 7-inch touchscreen IPS display with a maximum resolution of 1920×1200. The 16:10 aspect ratio provides some extra vertical space for monitoring tools.The monitor mount was designed for use with the SmallHD 5 series and the Portkeys BM5 but it will work with most other monitors that have 1/4″-20 mount holes on the bottom of the monitor.
One SDI output and one HDMI output port with cross-conversion.B&H Buy link: Canon EOS 77D Camera Body with Accessories Kit Was: $799.00 Now: $549.00 (Savings: $250.00).
I think that this smart move from Atomos will allow the E2 to become even more popular amongst independent filmmakers looking for a lightweight camera package capable of shooting high-quality images. The screen has a viewing angle of 180°, a contrast ratio of 1200:1, and a peak brightness of 500 nits. This level of brightness is a little disappointing since it’s way too low to make the monitor usable under bright sunlight. Moreover, it only represents a 50-nits increase over the original F7.
Canon EOS 77D Camera Body with Accessories Kit – $250/€156 Discount.I got away with around 3 hours of battery life at the maximum backlight setting. To me, this is a decent battery life for an on-camera monitor powered by a small battery. However, if you do the maths, a big Sony NP-F970 battery could theoretically run the PT5 for more than 12 hours!.
EOS R’s smaller brother – the EOS RP – is now also on sale during Black friday. As a bonus within this accessory kit on B&H you will get a SanDisk 32GB SDHC memory card, and a shoulder bag.B&H Buy link: Canon EOS Rebel T7i Camera with 18-55mm Lens and Accessories Kit Was: $899.00 Now: $649.00 (Savings: $250.00).
PortKeys LEYE II Viewfinder Introduced – Now with Built-In Battery Plate.PortKeys Universal Handle – Features.
If you have a lot of spare time, you can watch the six hours (!) long RED Komodo Owners Q&A Discussion video which was live-streamed over at Scott Balkum’s Youtube channel. Apart from Scott, there was also Phil Holland, Tim Daust, Curtis Boggs, and Phillip Grossman present at the video. Even Jarred Land, president of RED Digital Cinema, joined in for a while and shared some background information regarding Komodo.The build quality of this pouch is lovely and an excellent addition to the global package.
A foldable sun hood with a sun hood bracket.The waveform plot of our Xyla 21 stepchart shows about 11 stops (see figure 1). Using IMATEST to calculate the dynamic range I got a result of 10.8 stops at ISO 500, Z-LOG2 using ProRes HQ 4k DCI 23.98fps (at a signal to noise ratio of 2, 11.9 stops for SNR = 1, see figure 2).
The Z CAM E2 is a very compact and lightweight cinema camera that we discovered during NAB 2018. Here is a quick summary of the features and what this small camera is capable of:.This monitor has its limits for sure, but it is an excellent monitor if you want to step up your game and start working with a product that offers professional monitoring tools.
Chinese monitor manufacturer PortKeys just released a new budget-friendly monitoring solution to its lineup: the PortKeys LH5H. If you’re new to PortKeys products, we already reported about their BM5 5″ HDMI & SDI monitor, OEYE-3G EVF, or, more recently, the PortKeys KeyGrip handle. I’ve been using the extremely bright (2200 nits) PortKeys BM5 II for several months now, and it quickly became my go-to on-camera monitor.The Z CAM E2 also offers an HDR mode, where it captures a second image with an 8 times higher shutter speed for the highlighted part and merges it into one video frame (to increase the dynamic range by additional 3 stops).
The pouch that comes with the bag.Framing tools: Check Field, Grids, Image Flip, Cross Hair.
The great thing about the BM5 and HS7T is that they are equipped with both HDMI and SDI inputs and outputs. 4K video signals up to 30fps and FullHD up to 60fps are supported over the HDMI, while the SDI connections only support 1080p signals up to 60fps.Back then it was hampered by a weak codec (Full HD, AVCHD in 17Mbps) and the max. usable ISO value was 400, but the Voigtlaender lenses gave it the full frame look (e.g. the 25mm f0.95), and the hack of V. Kiselev at a later stage improved the bitrate to a stable 25Mbps. All in all, I loved the images – so much that I never sold it….
The monitor mount is not the greatest I’ve ever seen, some parts are made of plastic, but it gets the job done as the monitor is pretty lightweight.CVP offers free LUMIX 25mm f/1.7 lens (!), free 3-year Panasonic LUMIX warranty, and free accessories with a GH5 purchase.
Finally, there’s an HDMI input port on the right side, above the power inputs, that can take video signals of up to 4K30p. There is no video output port.The Portkeys PT5 retails for $169/€149, and it is available now.
Also, at the front, you’ll find the two zippers to fully open the main compartment.PortKeys HS7T Metal Edition: all-metal design.
Sony a6000 Camera with Two Lenses and Accessories – $400 Discount.The biggest benefit for me is that the Volta Cinema Top Handle removes weight from your rig and keeps it well balanced. Indeed, Sony NP-F batteries at the back of a monitor tend to be clumsy and not heavily enjoyable to shoot with. With this top handle, you feel lighter and gain freedom.
The Z CAM E2 M4 is a new addition to the Z CAM line. It is basically the original Z CAM E2 without some functions in a new body and with a lower price tag. For more information about this interesting modular Micro Four Thirds camera, make sure to check my article from its launch. Besides the camera body, this bundle further includes the PortKeys BM5 MKII Monitor (which can control the camera) and Hawk-Woods DV-F990 Battery.The Portkeys BM5 III WR is available now for €517. When you order it, you’ll have to choose the correct control cable for your camera, if you want to control it wired.
You can set the two included straps onto the four front holes of these rubber parts to attach extra equipment/tripod to the bag.HDMI is much more common on DSLR and mirrorless cameras and SDI is much more common on larger cinema cameras. While HDMI can transmit both video and audio, it doesn’t have the ability to lock into a port like SDI does. On the other hand, SDI only transmits video information and not audio.
Right side: a power switch, a USB Type-A port, and a 7-24V power input/output port with a barrel connector.Via LANC: Z CAM E2 F6 and S6, Blackmagic Ursa Mini, Ursa Broadcast, Pocket Cinema Camera 4k/6K, Sony FS5, FS7, FX9, C700 PL, C700 GSPL, C200, C100, C100 MARK 2.
Like every touchscreen monitor, one thing that annoys me is that the display quickly becomes a fingerprint cemetery. Of course, you can use the physical buttons to counteract that, but it takes a little bit of time to get used to these.Phil Holland is also testing various lenses on Komodo. He said he already mounted over 100 different lenses on the camera.
It’s time to talk about my favorite part of the Flexloader L: the straps and back padding. The back padding is out of this world, and even with a fully-loaded bag that is close to 20kg, you’ll not feel it on your back, especially your lower back. It has a firm – yet so comfortable – padding with a mesh design and air tunnels, so you don’t sweat.The Z CAM E2 in Conjunction with the Portkeys BM5 Monitor.
I would have preferred longer threadings with a full turn or even a bit more. That way, it would avoid possible loosening problems, even if it didn’t happen to me during the making of this review.Volta Cinema Top Handle Review – Elegant Way to Power Accessories.
RGB and Luma waveforms, histogram, false-color and zebra.Plus it offers Canon’s excellent Dual-pixel AF system. You can take a look at our 1DX Mark III review to know more about it. This set also includes the Canon 24-70mm f/2.8L II EF-Mount lens and Sandisk 512GB 1700MB/s CFexpress card.
The build quality of this pouch is lovely and an excellent addition to the global package.FilmConvert Black Friday 2019 Offer.
A Postcard from Hallstatt – Z CAM E2C Cinema Camera Review.The exterior design of the PortKeys LH5P is not groundbreaking; it’s simple and quite minimalist. Now let’s take a quick tour of the monitor:.
Though, inside the box, I was impressed to find so many accessories for the price, including:.The BM5 III WR is made from aluminum, and there is a tempered glass in front of the display.
Canon EOS 1DX Mark II Camera Body – $500 Discount.Camera Controls through the Monitor.
You can activate multiple monitoring tools simultaneously to help you, but you can’t decide where they’ll be on the screen. For example, the waveform and histogram will always be on the bottom right of the screen.With these upcoming firmware updates, the Ninja V will be capable of recording ProRes RAW HQ/ProRes RAW at up to 4K60P from the HDMI port of the E2. According to Atomos, “additional frame rates will be added in the future.” Your footage will be recorded onto affordable AtomX SSD mini SATA drives in the Ninja V.
Brightness, contrast, chroma, sharpness, tint.You can activate multiple monitoring tools simultaneously to help you, but you can’t decide where they’ll be on the screen. For example, the waveform and histogram will always be on the bottom right of the screen.
Beyond the listed tools you can also add up-to 30 selectable LUTs into the EVF. There is a little built-in screen on top of the camera but no “proper” display. You need to add your monitor via the HDMI/SDI ports.
Cameras, Drones, FilmConvert, MZed.The PortKeys P6 will start shipping at the end of December, and it retails for $169.00. You can pre-order it on PortKeys’ website, we will update this article with links to B&H and CVP as soon as it becomes available.
Also, and this is not particular to this monitor, but something I still don’t understand, is why manufacturers only put 1/4-20″ mounting points – thankfully with locating pins on the LH5P – at the bottom of their products.Sony a7S III Bundle – €187,54 Savings.
PortKeys Firmware Update and Updated PortKeys KeyGrip.PortKeys is mostly known for making affordable products that offer filmmakers an excellent price/features ratio. The PortKeys LH5H came out in July 2020, and its successor, the LH5P, was released in January 2021. This monitor is one of the company’s entry-level products. However, the least we can say is that this HDMI-only monitor is no different from its bigger brother when it comes to features, at an aggressive price-point.
The Volta Cinema Top Handle attaches to your camera or rig via a NATO rail. The handle comes with an extra piece of rail and two 1/4″-20 mounting screws if you don’t have one. If you have a lot of spare time, you can watch the six hours (!) long RED Komodo Owners Q&A Discussion video which was live-streamed over at Scott Balkum’s Youtube channel. Apart from Scott, there was also Phil Holland, Tim Daust, Curtis Boggs, and Phillip Grossman present at the video. Even Jarred Land, president of RED Digital Cinema, joined in for a while and shared some background information regarding Komodo.
Finally, one last thing that I did not understand is that you only have to press the power button once to turn the monitor on/off. You don’t have to hold that button, just press it. I guess this thing can cause a lot of unwanted switch-offs of the.* CVP Terms and conditions apply. All products are subject to availability. We reserve the right to withdraw the Promotion at any time without notice. Any descriptions of the promotional product is for illustrative purposes only and there may be small discrepancies in the size and colour of goods supplied.
Sony a7R II Camera Body with Free Accessories Kit – $400 Discount.In terms of direct comparison, the Soonwell PH70 battery handle retails for $279.00; it has double the Volta Cinema Top Handle’s capacity, but you can’t change batteries, and it is a lot bigger. Plus the Soonwell handle we have at our CineD headquarters can’t be turned on or charged anymore after it wasn’t used for about three months. For the price, it’ll be hard to beat the Volta Cinema option.
The features a 5″ LCD display with a FullHD 1080p / 1920 x 1080 resolution. The display is a touchscreen that you can turn on and off via a long press on the power button.The Portkeys PT5 is a 5″ monitor with one HDMI input and one HDMI output port. Having HDMI loop-through is pretty impressive on a monitor at that price level. Both in and out ports support resolutions up to 4K DCI at 24p, 4K UHD at up to 30p, FullHD at up to 60p.
You are limited to a single 7-24V Lemo port for power and some may miss having a battery option. After a quick run-through the menu/UI seems especially intuitive and the peaking seemed great. I like the new dividers that don’t make you lose a ton of space inside the bag. When you’re packing your camera equipment for a trip, you want to pack as much stuff as possible inside your carry-on backpack.
Fig. 2:IMATEST calculates 10.8 stops of dynamic range for the Z CAM E2 cinema camera at a signal to noise ratio of 2 for 4k DCI ISO500 ProRes recording using Z-LOG2 (1/SNR = 0.5, medium value in the upper right hand table). Finally, one last thing that I did not understand is that you only have to press the power button once to turn the monitor on/off. You don’t have to hold that button, just press it. I guess this thing can cause a lot of unwanted switch-offs of the.
The Z CAM E2 cinema camera is a great new addition to the line of micro four thirds cameras, and got so many things right in the first place – first and foremost the image (audio via the 3.5mm input leaves a lot to be desired though).This new Portkeys PT5 on-camera monitor came out in July 2021 and is the company’s most affordable monitor to date. With a $169/€150 price point, I was skeptical at first regarding what this monitor has to offer. However, I soon realized I had nothing to worry about.
In short, these new dividers take less space inside your bag, so you have more room to store camera equipment.Chinese monitor manufacturer PortKeys just released a new budget-friendly monitoring solution to its lineup: the PortKeys LH5H. If you’re new to PortKeys products, we already reported about their BM5 5″ HDMI & SDI monitor, OEYE-3G EVF, or, more recently, the PortKeys KeyGrip handle. I’ve been using the extremely bright (2200 nits) PortKeys BM5 II for several months now, and it quickly became my go-to on-camera monitor.
I’m currently finishing our review of the PortKeys LH5H that will be released very soon, so keep an eye on CineD if you want to learn more about these affordable on-camera monitors.This HDMI-only display features a brightness of 1700 nits, a resolution of 1920 x 1080 that can take 4K signals, basically all the monitoring tools you need, and the cherry on the cake: the LH5H can even power cameras that use Sony NPF-style batteries. Let’s take a closer look at this on-camera monitor on a budget!.
E2-S6 S35: $3995 available in PL, EF and M4/3 mounts.As a direct frustration with Tilta’s Nano motor which required a very specific input to perform well, I decided to have a go at designing a solution. Oskar joined me again so this time we actually ended up launching an Indiegogo campaign. At the time we didn’t have much of a prototype but the idea was clear: Someone had to put some high-capacity cells inside a top handle since it was such a mandatory piece of kit. Why not us?.
B&H Buy link: Sony a6000 Camera with two lenses and accessories Was: $998.00 Now: $598.00 (Savings: $400.00).Let’s be honest, this plastic sun hood will not get you very far, especially as one of the sides is open. It is hard to put inside the bracket, it barely fits, there are light leaks from all sides… So you have it, it’s not the best design in the world, but at least they give you something that can help a bit.
Sony a7 II Camera with 28-70mm Lens and Accessories Kit – $600 Discount.B&H Buy link: DJI Osmo Pocket Was: $399.00 Now: $309.00 (Savings: $90.00).
Full-frame 12MP sensor, UHD in up to 120P, Full HD in up to 240p, all modes available in 10-bit 4:2:2 internally, no overheating, (almost) no crop, flip-out screen, full-size HDMI… This camera seems to tick a lot of boxes.The new 4K Monitor Module 750 TX, like its RX (receiver) brother, bolts cleanly onto the back of any SmallHD Smart 7 monitor. That means the whole unit then only requires one power source, one input, one mounting point. It functions much more like an extension of the monitor than a secondary unit. If you already favor SmallHD monitors this is great news, but unfortunately it boxes out other manufacturers.
The PortKeys Universal Handle is in a pre-order stage at the moment for $299.00 until February 22. After that period, the price will be $399.00, and orders will begin to ship in March 2020. You can pre-order it on PortKeys’ website.Yes, that’s right. Even the brand new Sony a7S III is included in this CVP special. The camera is supposed to start shipping in September 2020, but it already caused a lot of excitement.
Indeed, the Flexloader L comes with a built-in TSA lock that allows you to securely close your bag when you’re commuting, for example.Chinese manufacturer PortKeys has just introduced a new version of its famous HDMI-only compact electronic viewfinder: the PortKeys LEYE II. The LEYE II now features a built-in battery plate. Also, PortKeys has been teasing an SDI version of its viewfinder for quite some time now, which should be released soon. So let’s take a closer look at these!.
Attaching an external monitor gives a closer approximation of how each shot will translate to the big screen, and as an added bonus, other people on set can watch the footage take shape.Next are the shoulder straps that do have two adjustments settings. The first one, like every backpack, is the length of each strap.
However, the 5-inch display of the BM5 is a little too small sometimes, especially for focusing or precise monitoring tasks. There’s some good news though since PortKeys is now improving their 7-inch monitor lineup by introducing a Metal Edition of their already-existing HS7T monitor. Let’s take a look at the improvements.Pretty much every tool you need is here to judge your image, except Zebras and a Vectorscope, but that’s already decent for an entry-level on-camera monitor.
Portkeys also showcased camera control for the Canon EOS C70, but you’ll need a dedicated LANC cable.tell us who you are, what you do, what you enjoy writing about most – and why you think this is something for you.
The headphone volume output, image flip, OSD language/transparency.Buy link: Canon EOS C500 Mark II Bundle Was: €19.452,65 Now: €18.928,94 (Savings: €523,70).
Last but not least, the bag comes with a 5-year warranty. You’ll need to register and activate your warranty on Manfrotto’s website. The company’s customer service is incredible, and you can trust their warranty.Last but not least, at the front of the bag, inside the rain cover pocket, you’ll find two nylon loops. Using the two front straps and these two nylon loops, you can attach a heavy camera tripod to the bag. I tried with my Sachtler Speed Lock CF HD set of tripod legs: it works.
The fan is quiet; you can hear it when you start the monitor because it’ll kick in at maximum fan speed for a second. But, once the monitor is on, you’ll have to put your hear next to the exhaust vent to notice it at low speed, and even an on-camera microphone would have a hard time catching it.Also, it is a WLED display, and the panel itself is 10-bit (8+2 FRC), so not “true” 10-bit, even if very few monitors are real 10-bit.
Various picture profiles available including Rec.709 / Z-Log2 / FLAT / HLG.Can you get more camera stuff inside? For sure, but that’s already a fair amount of gear to carry on your back.
The next bundle includes the newer flagship full-frame mirrorless camera from Panasonic – the LUMIX S1H (our Review, our Lab Test). The camera can record up to 6K 30P or a wide range of 4K modes. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO.The batteries have two power connectors (plus and minus) used to charge them and connect to the handle’s pins. Also, there are small coded pins, so you can’t insert the battery inside the handle or charger in the wrong direction.
CVP Buy link: Panasonic LUMIX G9 Camera Body Was: €1,100.86 Now: €941.78 (Savings: €159.09, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).Also, dynamic range is limited to 10 stops and hindered furthermore by the fact, that the noise floor is cut off – hence, you cannot dig into the shadows to get that organic, flatter look – shadows are simply black with no information.
The comes in a compact cardboard box. Nothing exciting so far. Once you open it, everything is neatly packed, with no space wasted. It’s the kind of box that is impossible to re-pack once you’ve opened it and taken the products out. Interestingly enough, the monitor doesn’t come with a case to store it in.Monitor manufacturer FEELWORLD has just released a new affordable 7-inch monitor, featuring a Sony NP-F style battery plate on the back to host and power a wireless video transmission system. Built on the legacy of the original F7 monitor, the FEELWORLD F7 PRO is now available for $239.
In a camera bag configuration, I was able to fit:.FEELWORLD F7 PRO Released – Affordable 7” Director’s Monitor.
Ideally you come from the filmmaking industry, have a technical mind and are interested in nerding out about new camera gear, fuzzing over things that matter to filmmakers and content creators alike, and have a talent and lust for writing.The Manfrotto PRO Light Flexloader L is available now for $329.99/€227.35. It can seem like a fairly high price tag, but the price/feature ratio is incredible and you’ll probably have a hard time finding a more affordable solution that offers you better build quality, versatility, and reliability.
For the camera part, all the exposure tools (zebra, false color), as well as focus peaking, work very well, although the focus peaking is very strong – I would prefer an option to adjust this in the menu (not available currently).Fig. 3: The Portkeys BM5 monitor – bright (2000 NITS) and well built, however the screen is very reflective which can hamper the viewing experience outside.
I used the LH5H for three months and a dozen shoots in various shooting conditions before writing this review. I can say that the image coming out of the LH5H and LH5P is excellent for the price, especially in an interior situation.Cameras, Drones, FilmConvert, MZed.
Crosshair, framing guides, grids, aspects.What I always liked about the micro four thirds format is the possibility to adapt almost any lens, including the option to use a speed booster (0.71x). The speed booster allows the use of Canon EF glass for example, while at the same time increasing the light sensitivity by one stop.
Function settings page where you’ll find all your monitoring tools.For more information, please visit Portkeys’ website here.
Second is to use the dedicated 7-24V power input port, which is ideal if you want to power it of a V-Lock/Gold Mount battery.However, I think that the Portkeys PT5 is more suited if you’re often shooting inside. For example, during corporate/interview shoots inside, it’s an excellent low-cost option that I had a blast using.
I tried the Manfrotto PRO Light Flexloader L in two primary configurations: a “traditional” camera bag and a multipurpose backpack.The LH5P is powered via a Sony NP-F battery, but you can use the USB port to feed the monitor from a V-Mount/AB external battery as well as a battery bank.
The PortKeys P6 will start shipping at the end of December, and it retails for $169.00. You can pre-order it on PortKeys’ website, we will update this article with links to B&H and CVP as soon as it becomes available.The functions you can control are pretty basic at the moment: start/stop the recording, change your ISO settings, adjust the focus settings…etc. I think this is just the beginning.
With these upcoming firmware updates, the Ninja V will be capable of recording ProRes RAW HQ/ProRes RAW at up to 4K60P from the HDMI port of the E2. According to Atomos, “additional frame rates will be added in the future.” Your footage will be recorded onto affordable AtomX SSD mini SATA drives in the Ninja V.However, the original PortKeys LEYE had one major drawback: you need to power it externally. For example, suppose you have a small DSLR/mirrorless/cinema camera. In that case, you probably don’t want to unnecessarily rig your camera with V-Mount batteries or a power bank only to feed an EVF.
Sony a7 III is currently considered by many as the best Sony mirrorless camera for video. Its 24MP full-frame CMOS sensor performs really well in low light and its 693-point hybrid AF system also works well for video shooting. The camera can record up to UHD 4K30p video with HLG & S-Log gamma picture profiles. For more information about the camera, go ahead and read Johnnie’s Sony a7 III review.On the night shots, I had to ramp up the ISO to 16000 – I think the results are still OK and usable.
Using a stabilized lens is a must – as I did for the sample footage (the Olympus 12-100 F4 IS Pro lens).Not all monitors are created equally, and the quality of the display behind them may vary significantly. A great on-camera monitor must be as color accurate as possible and as close to “what you see is what you get” as possible.
When the PT5 is up and running, you can adjust various display settings inside the menu, including:.What do you think of the PortKeys BM5? Do you think the camera remote functions are useful? Let us know in the comments down below!.
To me, being able to control the camera using a field monitor (like a RED Touch for example) is a big thing. If I can get a bigger monitor to mount on a Canon C200 or Sony FS5 and still be able to control the camera like the standard little screen, it’s a go-to.The team at PortKeys is moving fast, and two weeks after the announcement of their latest P6 monitor, they just released a new product. However, this time they are not back with a display, but with a camera handle. This handle is a new kind of product for PortKeys, but it features the same leitmotiv as their monitors: affordable, innovative, and high-quality.
If you power your monitor with a Sony NP-F or Canon LP-E6 battery, the 8V DC out port on the right side of the monitor can be used to power other small camera accessories or a smartphone, I suppose. Unfortunately, a D-Tap or any other powering cable isn’t included in the kit, but you can easily find one at affordable prices.The screen itself is very bright (2000 NITS), even in direct sunlight I had no issues seeing the image. Unfortunately, the surface of the screen is very reflective which can hamper the viewing experience, see figure 3 below.
The OEYE-3G is targeted at professional users, while the PortKeys LEYE fills a big hole in the market for enthusiastic/filmmakers that don’t use an external viewfinder on a daily basis and are looking for an EVF that doesn’t break the bank.B&H Buy link: Sony a7S II Camera Body with Free Storage Kit Was: $2,438.00 Now: $1,998.00 (Savings: $440.00).
PortKeys BM5 – A Field Monitor That Can Control Your Camera.Finally, the Volta Cinema Top Handle has three 1/4″-20 mounting points at the handle’s back. The threading is really thin, and the metal is not thick here. While this is nice to have mounting points to store screws, I wouldn’t mount a camera accessory to it, even if I don’t see it breaking at all.
The top flap features three meshed pockets: two small ones (12.5 x 11cm/4,92 x 4,33in) at the top and a large one at the bottom (23 x 17cm/9 x 6,7in).The PortKeys LH5H features a 5.2″ touch screen display with a maximum brightness of 1700nit. Usually, an on-camera monitor with more than 1500nit is daylight-viewable.
Another company that announced some Komodo Accessories is KipperTie. They offer a PL to RF mount adapter with a mounting foot. Additionally, the company offers a mounting bracket called Chinstrap for extra PL mount lens support even without a baseplate.B&H Buy link: Panasonic LUMIX G9 Camera Body with accessories set Was: $1,497.99 Now: $997.99 (Savings: $500.00).
Optimize the camera control interface and functions: improve the aperture display accuracy of BMPCC4K/6K. Fixes an issue where the BMPCC 4K resolution cannot be switched to 4K 2.4:1 4096×1720.This year we decided to divide the Black friday deals into three posts, which we will publish in the next days before friday November 29:.
Edit: Phil Holland was kind enough to share with us a download link for footage taken with his new camera. You can obtain it by clicking here.PortKeys HS7T Metal Edition Released – 7” HDMI & SDI Monitor in a Tough Body.
Canon’s full-frame DSLR flagship 5D Mark IV offers interesting price tag and free accessories in kit on B&H (spare battery, memory card, bag, and optics cleaning kit). The PortKeys LEYE features a 2.4″ LCD screen with an effective resolution of 1440 x 900. The display is 8-bit – which is enough for framing your shots -and has a maximum brightness of 300nit with a 1100:1 contrast ratio.
B&H Buy link: Sony a7 II Camera with 28-70mm Lens and Accessories Kit Was: $1,598.00 Now: $998.00 (Savings: $600.00).CVP offers free LUMIX 25mm f/1.7 lens (!) and free 3-year Panasonic LUMIX warranty. CVP also offers G9 in a set with the LUMIX 12-60mm f/2.8-4 lens for an incredible price.
FUJIFILM X-T3 Camera Body Kit with Accessories – $200/€272 Discount.You can immediately feel that it’s a well-made product out of the box. The materials look dense, the stitchings of the bag are perfect, the sewing thread is thick.
PortKeys BM5 Monitoring Functions.You are limited to a single 7-24V Lemo port for power and some may miss having a battery option. After a quick run-through the menu/UI seems especially intuitive and the peaking seemed great.
I’ve used bags, cases, rolling bags, and fly cases from various types and many different brands. The quest to find the perfect storage/carrying solution that combines build quality, storage capacity, total package weight, and functionality is endless.I tried the top handle with a PortKeys BM5 monitor and a SWIT CM-S75F; both are not on the compatibility list but worked just fine. Also, I tried it with my Canon EOS R and did not have any issues.
To use a Canon LP-E6 battery, slide it to the left. To use a Sony NP-F battery, slide it to the right. That’s very smart, and I love it.Other than the sensor upgrade, all the features are the same as can be found in the original Z CAM E2, including the same 10bit ProRes recording to CFast cards. Z CAM only published the spec sheet for the 6k S-35 version that you can check out below. On the recording format front, the company will support internal RAW recording via a firmware update soon. More details will be revealed at the end of April.
Home
Community
☰
