Bottom: there is one camera control mini-USB port, a 5-pin motor camera control port that doubles up as a DC 7-24V power output port, one 1/4-20” mounting point with locating pins, and a USB Type-A port to update the firmware of the LH5P, load your LUTs, or power it.Atomos Unleashes ProRes RAW for the Z CAM E2.
Though, inside the box, I was impressed to find so many accessories for the price, including:.Nothing broke; it still works perfectly. I secured the casing with some tape, so it stays as closed as it is supposed to be. However, I’m a bit worried about its longevity over time. I think that Volta Cinema could work on a better battery charging solution.
Top: there are four customizable function keys, a power switch, and four buttons to access and navigate inside the menu.However, the 5-inch display of the BM5 is a little too small sometimes, especially for focusing or precise monitoring tasks. There’s some good news though since PortKeys is now improving their 7-inch monitor lineup by introducing a Metal Edition of their already-existing HS7T monitor. Let’s take a look at the improvements.
I think the Black Mini has a tiny little fan on the inside that you can only hear if you put your ear at the back of the monitor. In short, you won’t hear it, and the monitor is 100% silent.HS7T with wireless video transmission system.
And now comes the fun part! Like its big brother the BM5 II, the PortKeys LH5H is capable of controlling your camera. Above is a list of all compatible cameras, and the features you can control via the LH5H.The display has a resolution of 1920 x 1080. It is a touchscreen with a maximum brightness of 2200nits and a contrast ratio of 1000:1.
CVP Buy link: Sony a7R III Camera Body Was: €2,435.93 Now: €2,240.98 (Savings: €194.95 – CashBack).EOS R’s smaller brother – the EOS RP – is now also on sale during Black friday. As a bonus within this accessory kit on B&H you will get a SanDisk 32GB SDHC memory card, and a shoulder bag.
Have you worked with the Z CAM E2? What are your experiences with this camera? Please share your thoughts in the comments below.As I mentioned previously, you can navigate inside the UI via the touchscreen or the physical buttons. But, you can also turn off the touchscreen by long-pressing the power button. It’s nice to have that option if you want to avoid fingerprints on your display!.
The batteries have two power connectors (plus and minus) used to charge them and connect to the handle’s pins. Also, there are small coded pins, so you can’t insert the battery inside the handle or charger in the wrong direction.The PortKeys LH5P is mostly made out of aluminum with tempered glass in front of the screen. It doesn’t feel like it will break if you drop it, even if I don’t advise you to do so. The buttons’ are plastic, and they feel a bit “clicky,” it’s not incredible, but they’re ok.
Portkeys also showcased camera control for the Canon EOS C70, but you’ll need a dedicated LANC cable.Education is an important part of self-development. MZed offers all kinds of usefull online courses. You can check our rewievs of their courses – Cinematic filmmaking masterclass by Philip Bloom and Directing color with Ollie Kenchington. They have interesting Black Friday offers which will be live from Wednesday 27th (PST) until the end of Monday, December 2nd (PST). Available offers:.
CVP Buy link: Canon EOS 77D Camera Body Was: €682.12 Now: €525.99 (Savings: €156.13 – Cashback).Top: there are four customizable function keys, a power switch, and four buttons to access and navigate inside the menu.
Finally, there’s a 7.4/24V power input/output port with a barrel connector that you can use to power the PT5. Unfortunately, a D-Tap or any other powering cable isn’t included in the kit, but you can easily find one at an affordable price. Last but not least, this port can feed a 7.4V camera accessory if you power the monitor with a Sony NP-F/Canon LP-E6 battery, but I did not try it.The BM5 is PortKeys’ new 5-inch 1080P flagship field monitor. It features an HDMI and SDI input, and an SDI output with cross-conversion. In case you need to monitor your sound, a 3.5mm output jack is located on the left side. There is a USB port at the bottom of the monitor for future firmware upgrades.
Canon EOS 6D Mark II Camera Body with Accessories Kit – $400 Discount.The monitor comes with a wipe cloth and a USB disk. More accessories are available to purchase separately, including a safety box, an anti-fall rubber protection bracket, a sunshade, and a handy pan/tilt arm to mount it on top of your camera.
If your lens is compatible, you can zoom and focus via the handle.Sony a7S II Camera Body with Free Storage Kit – $440/€195 Discount.
Sony a6000 Camera with Two Lenses and Accessories – $400 Discount.Built-in monitoring tools include: 3D LUT monitoring, Waveform, Luma, Histogram, false color, Zebra, Peaking, Zooming, Audio Meters and so on.
B&H Buy link: Canon EOS 1DX Mark II Camera Body Was: $5,999.00 Now: $5,499.00 (Savings: $500.00).Finally, when grading the footage of the Z Cam E2C in DaVinci Resolve using the official Z CAM LUT’s from their webpage (I used the zlog2_LC709A_64_noGain_normal LUT) I noticed very yellowish skin tones – see the image below.
Sony a6500 Camera Body with Free Accessories Kit – $500 Discount.The LH5P has a built-in camera control module and can control various camera via a cable or wirelessly for BMPCC 4K/6K users. The LH5P can connect to your camera via a cable, and Z CAM, Canon, Sony, Panasonic, Blackmagic cameras are supported at the moment. In short, with the LH5P you can adjust your camera settings, trigger recording, and even pull focus without even touching your camera!.
CVP Buy link: Panasonic Lumix G9 Camera Body with 12-60mm f/2.8-4 Lens Was: €1,381.43 Now: €1,118.24 (Savings: €263.19, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).From what I saw, it looks like the system is very responsive and not laggy at all. This is good news for all RED Komodo users, who now have another affordable option for wireless camera control via an onboard camera monitor.
Sony a7R II Camera Body with Free Accessories Kit – $400 Discount.offered an exclusive limited-time discount when purchasing via Amazon and using an exclusive Y2DWYGBM promotional code. This review is my unbiased opinion as VideoGear did not modify, influence, or give input about the article before its publication.
CVP Buy link: Sony a7 III Camera Body Was: €1,710.35 Now: €1,564.83 (Savings: €145.52 – CashBack).Canon’s full-frame DSLR flagship 5D Mark IV offers interesting price tag and free accessories in kit on B&H (spare battery, memory card, bag, and optics cleaning kit).
Z Cam E2C cinema camera rigged up with a monitor (Portkeys BM5) and a ZOOM H2 (not visible, behind the monitor) for audio capture via the 3.5mm input.And this is the feeling you get, colors are not off, but you can make them better by adjusting the contrast a bit and the chroma/tint settings by plus or minus two/three. If you have an i1 Display Pro prob, you can even re-calibrate your LH5P yourself later down the road if needed.
This is a design choice, and after using it, I get why they did it that way. I would like to have the option to close it if I’m shooting in tough weather conditions. It would protect the handle and prevent dust/rain from getting in.Also, there are a couple of strange things in the UI. For example, you can’t activate an aspect marker and the grid simultaneously since they’re on the same page, so you’ll have to choose between one of them at a time. The same goes for the waveform; you can’t activate the RGB and Luma waveform simultaneously. This is a bit weird, but you can get used to it.
Manfrotto PRO Light Flexloader L specifications.Future firmware updates should increase the handle’s capabilities. I like the versatility of such products.
The monitor mount came in two parts. The round piece’s screws had threadlocker which makes removing them really hard, but you have to do it to assemble the monitor mount together.On the software side, the PortKeys P6 features a lot of useful analyzing functions and tools. Below is a list of the built-in tools:.
Nothing broke; it still works perfectly. I secured the casing with some tape, so it stays as closed as it is supposed to be. However, I’m a bit worried about its longevity over time. I think that Volta Cinema could work on a better battery charging solution.Both the LH5H and LH5P has the same ergonomics and input-output ports:.
However, and this is something to keep in mind while you’re reading this entire review, the is only $89, and it’s an entry-level on-camera monitor. At this price point in the filmmaking world, you usually can’t buy many products, especially monitors or products with any electronics inside.Talking about the bottom of the Flexloader L, there are two rugged bumpers under the dense nylon cover. These bumpers will help reduce impacts when you put your bag on the ground.
The buttons on top of the monitor are a bit rigid and clicky too. The battery fit at the back of the monitor is smooth, tolerances are good, and both Sony/Canon batteries go in and out smoothly; no issues here.While planning a trip to the Indian jungle to film a short documentary about Pench National Park, my colleagues at cinema5d challenged me to leave my standard gear at home and take the new cinema camera Z CAM E2 instead – would it be up to the task?.
The R6 is one of Canon’s two newly introduced mirrorless cameras. It is the lower-resolution more-affordable sibling to the Canon R5. It offers internal 4K60p video in 10-bit with no crop and with AF.I asked some colleagues and friends to try carrying the Flexloader L, and everybody was impressed by the amount of support and comfort this backpack provides you. I think you have to try it out for yourself to experience how a bag should feel on your shoulders.
I received the Volta Cinema Top Handle in two boxes. In the first one, there was the handle, a NATO rail with two 1/4″-20 screws, and some extra connection pins in case the handle break. There were two batteries with one charger in the second box. Also, they included optional accessories: a dummy D-Tap to LP-E6 battery cable and the monitor mount.For BMPCC 4K/6K users, you can even control your camera wirelessly. You don’t need the additional BT1 Bluetooth module with the LH5H, as it is built-in inside the monitor. It means that you can control your BMPCC 4K/6K wirelessly out of the box!.
DJI Osmo Pocket is the smallest Osmo yet. It combines camera with a 3-axis gimbal and fits literally in the palm. The camera still offers up to 4K 60fps video recording. Make sure to watch and read our DJI Osmo Pocket review for more information.On top of the LH5H, you’ll find four customizable function keys, a power switch, and four buttons to access and navigate inside the menu. At the bottom of the monitor, there is one camera control mini-USB port (more on that later) and a 5-pin motor camera control port that doubles up as a DC 7-24V power output port.
So far, so good! Next, I put the Z Cam E2C through our lab to measure dynamic range and rolling shutter.Fig. 3: The Portkeys BM5 monitor – bright (2000 NITS) and well built, however the screen is very reflective which can hamper the viewing experience outside.
To use a Canon LP-E6 battery, slide it to the left. To use a Sony NP-F battery, slide it to the right. That’s very smart, and I love it.Video Plugins are available for only $89 (Was $179). FilmConvert Nitrate Bundle is available for only $129 (Was $249). Sale runs from Monday November 25 until Cyber Monday, December 2.
Last but not least, Portkeys implemented wireless camera controls for the RED Komodo. This means that, compared to the SmallHD Focus Pro, for example, you don’t need an extra cable to communicate between the Komodo and the monitor. Most of the magic from the PortKeys Universal Handle happens on the inside. Indeed, it features a built-in Bluetooth and WiFi control module. In short, it means that the handle can connect wirelessly to your camera to control it. Below is a list of the settings and functions you can control via the Universal Handle.
B&H has a great deal on the Sony a6000 with two lenses – E PZ 16-50mm f/3.5-5.6 OSS and E 55-210mm f/4.5-6.3 OSS – plus memory card, extra battery, battery charger, and camera bag.CVP Buy link: Panasonic LUMIX G9 Camera Body Was: €1,100.86 Now: €941.78 (Savings: €159.09, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).
the height of the small dividers could be higher so small objects doesn’t move inside the bag.Phil Holland is also testing various lenses on Komodo. He said he already mounted over 100 different lenses on the camera.
In a camera bag configuration, I was able to fit:.B&H Buy link: Canon EOS 6D Mark II Camera Body with Accessories Kit Was: $1,599.00 Now: $1,199.00 (Savings: $400.00).
Canon EOS Rebel T7i/800D Camera with 18-55mm Lens and Accessories Kit – $250/€126 Discount.Lenses, Computers, Laptops, Tablets.
Finally, one last thing that I did not understand is that you only have to press the power button once to turn the monitor on/off. You don’t have to hold that button, just press it. I guess this thing can cause a lot of unwanted switch-offs of the.The R6 is one of Canon’s two newly introduced mirrorless cameras. It is the lower-resolution more-affordable sibling to the Canon R5. It offers internal 4K60p video in 10-bit with no crop and with AF.
Like all PortKeys products, the LEYE features all the monitoring tools you need, including;.The build quality of this pouch is lovely and an excellent addition to the global package.
If you’re new to PortKeys, this company is specialized in affordable HDMI and SDI camera monitoring solutions. Recently, we talked about their LEYE viewfinder, the fully-featured SDI/HDMI BM5 monitor, and the affordable PortKeys P6. The company has just released a new 5.5″ HDMI-only monitor, the PortKeys LH5P. This product name may sound familiar to you, as it is the big brother of the PortKeys LH5H that was released last year. To charge batteries, all you have to do is slide them into the battery charger. The pins inside the charger will align with the battery connectors, and it’ll start charging. However, the batteries are not locked into place in the charger.
Manfrotto PRO Light Flexloader L pockets and compartments.Two little pins inside the handle make the connection between the battery and the D-Tap port. These pins slide back and forth inside the groove when you adjust the handle back and forth.
Sharpness, chroma, brightness, backlight, display flip, tint, color temperature adjustments.In 4k DCI mode (4096 x 2160) the crop factor of the Z CAM is about 1.9, using the speed booster gives a crop of 1.35 approximately.
Buy link: Sony FX9 Bundle Was: €12.725,64 Now: €12.401,64 (Savings: €324).However, and this is something to keep in mind while you’re reading this entire review, the is only $89, and it’s an entry-level on-camera monitor. At this price point in the filmmaking world, you usually can’t buy many products, especially monitors or products with any electronics inside.
Canon EOS RP Camera Body with Accessories Kit – $300/€243 Discount.you have fluent writing skills in English (native speakers preferred).
The Portkeys PT5 is passively cooled, so it does not have a built-in fan. Also, it means that the monitor doesn’t make any noise when it is on. As a direct frustration with Tilta’s Nano motor which required a very specific input to perform well, I decided to have a go at designing a solution. Oskar joined me again so this time we actually ended up launching an Indiegogo campaign. At the time we didn’t have much of a prototype but the idea was clear: Someone had to put some high-capacity cells inside a top handle since it was such a mandatory piece of kit. Why not us?.
Inside the main compartment, you’ll find two central dividers that measure the Flexloader L’s interior length. The Flexloader L also comes with eight small dividers.If you’re often shooting outside you should probably not consider this monitor as the screen is tough to see if you’re shooting outdoor. Also, even on a cloudy day, the included sun hood has its limits.
CVP Buy link: DJI Osmo Pocket Was: €319.18 Now: €270.67 (Savings: €48.51).Also, once the image looks acceptable, you can start seeing that the display doesn’t have a high density of pixel: 441ppi, according to the manufacturer. If you’re pixel peeping, you can see individual pixels on the screen.
Attaching an external monitor gives a closer approximation of how each shot will translate to the big screen, and as an added bonus, other people on set can watch the footage take shape.There is a built-in Bluetooth module and a camera control port to control your camera wired/wirelessly.
A quite surprising result on the rolling shutter measurements, which adds up to the very positive overall impression: in 4K DCI 25p mode (using ProRes HQ and ZLOG2) I got a very good result of 11.1[ms]. For comparison, the BMPCC4k has a rolling shutter of 16[ms] in UHD 25p mode. Buy link: Canon EOS C500 Mark II Bundle Was: €19.452,65 Now: €18.928,94 (Savings: €523,70).
Unfortunately, we had no cage available for the Z CAM, but the camera has various ¼” mounting points on top, bottom and on the sides. In conjunction with the Z CAM E2 I used an early prototype of the Portkeys BM5 monitor mounted with a magic arm, see the image below (the released version is black, the prototype had an anodized green surface finish). And an expandable gimbal pocket that opens in two steps: first, unlock the zippers all around the bag. Then, extend your bag to reveal the full-size gimbal pocket. This pocket is initially designed to fit a Manfrotto gimbal, like their 300XM modular gimbal.
The exterior design of the PortKeys LH5P is not groundbreaking; it’s simple and quite minimalist. Now let’s take a quick tour of the monitor:.The EVF is built with all aluminum construction and the OEYE-3G EVF weighs in at a very manageable 400 grams. Three custom user buttons are available and you can mount the EVF using the ARRI Rosette or two provided 1/4″ holes. There is also a headphone port on the back for monitoring audio.
When it comes to the E2, the added benefit of this connection, is the ability to record ProRes RAW directly on the Atomos Ninja V. (At this stage, there is no word from Atomos if ProRes RAW recording will be implemented on other members of the E2 family of cameras).One SDI input and one HDMI input port. It can take video signals up to FullHD at 60 fps.
B&H Buy link: Canon EOS Rebel T7i Camera with 18-55mm Lens and Accessories Kit Was: $899.00 Now: $649.00 (Savings: $250.00).Not all monitors are created equal, and the quality of the display behind them may vary significantly. A great on-camera monitor must be as color accurate as possible and close to “what you see is what you get” as possible. If your monitor colors are incorrect, you won’t see your footage the way it’s supposed to be.
I’d say that from 0 to 25% brightness, black levels are okay, but you’ll have to consider gamma shifts if you go higher than that, which you’ll do if you go outside.Canon EOS R6 Bundle – €144,82 Savings.
As a bonus within this accessory kit you will also get the FTZ Mount adapter to use with exsiting Nikon F lenses, Sony 32GB XQD G Series memory card, and DSLR shoulder bag.Sony a7R II Camera Body with Free Accessories Kit – $400 Discount.
If you have a professional video tripod with a fluid head or light stands, you have another option on both sides of the Flexloader L.This style of cameras usually comes with lots of external ports, and the Z CAM E2 is no different. There is a 10-pin LEMO port for timecode sync, as well as a 2.5mm LANC jack. In terms of audio, there is a 3.5mm mic output plus headphone jack and a 5-pin LEMO port for a dual channel XLR microphone.
MZed Pro annual membership is available for just $199 (normally $299, save $100). Members get access to MZed library of 29 current courses plus new courses added regularly. The ourses can be downloaded using their new iOS app.RGB and Luma waveforms, histogram, false-color and zebra.
On the left side, there is a standard ARRI Rosette, the USB port, and the On/Off switch. At the bottom, you’ll find two 1/4″ holes for mounting purposes, and the diopter adjustment dial.Now, let’s take a look at the top Black friday camera deals for filmmakers:.
FEELWORLD F7 PRO back view. Source: FEELWORLD.Also, I can’t say enough how comfortable the Flexloader L is on your shoulders and back. This is a crucial part of a backpack that will get as heavy as it can get once fully loaded.
If that wasn’t enough, it also has recording capability and Bluetooth connectivity. Compatible with virtually every input and setup, it even allows you to control internal features like shutter speed and focus when used with certain camera models. The battery is held at the back of the handle by a screw. As you can see, one end of the Volta Cinema Top Handle is fully open. According to the company:.
The Z CAM E2 also offers an HDR mode, where it captures a second image with an 8 times higher shutter speed for the highlighted part and merges it into one video frame (to increase the dynamic range by additional 3 stops).For all ZCAM E2 models, the control interface adds AF/MF and touch focus enable button.
The Volta Cinema Top Handle immediately caught my attention when I first saw it. From what I saw, I found this product brilliant, with a simple design and a clear mission: power your camera or accessories via the handle. Other companies have tried this, albeit arguably not as elegantly. If you are tempted by the price to use it as a cinema camera be aware that the rolling shutter means that you cannot shoot handheld footage without a stabilized lens. It’s an absolute must in that scenario.
CVP: Panasonic LUMIX S1 Camera Body – €386 Cashback plus Free 3-Year Warranty.This product demonstrates the advantages of a semi-closed ecosystem. The Vitec Group has, over the years, picked up SmallHD, Teradek, and even Amimon – the company that manufactures the wireless chips underlying them all. By bringing all of these companies under one umbrella, Vitec opened the door to collaborative products like the Teradek 4K Monitor Module family.
The loupe of the LEYE II features a +8 to -3 diopters adjustment.When the monitor is switched on, you can adjust various display settings inside the menu, including:.
Indeed, the Volta36 batteries are 36Wh/5A batteries; that’s a lot of juice in such a small package. In the graph above, you can see the capacity to weight ratio compared to other battery solutions.Contrast, chroma, sharpness, tint.
You got it; everything you’d expect is here.According to Manfrotto, the fabrics are water repellant. Also, there is a built-in fold-out rain protector located at the front of the bag. I did not stress-test the water resistance, but I never had issues with Manfrotto products in rainy conditions in the past, so this one should be no different.
I had an enjoyable time using the LH5H in run-and-gun situations, especially with a mirrorless camera. The monitor is light, it has a decent battery life, so it’s perfect for compact camera setups. However, I had a couple of hard times with the UI while trying to adjust some features, but I already mentioned that.However, the sun hood blocks the sunlight pretty effectively, there are minor light leaks on the edges, and it’s quick to set up. It’s definitely nice to have it in the package!.
B&H Buy link: Panasonic LUMIX G9 Camera Body with accessories set Was: $1,497.99 Now: $997.99 (Savings: $500.00).Build quality and mounting points.
I’ll say it again: this is an $89 on-camera monitor, so don’t expect it to survive a drop at home nor monthly rentals to professional filmmakers. It gets the job done for owners/operators, but that’s it.The display uses WLED backlight technology, and the panel itself has a contrast ratio of 1000:1. It is worth mentioning that the PT5 has a 10-bit (8+2 FRC) display, so not “true” 10-bit, even if very few monitors are real 10-bit.
FEELWORLD F7 PRO Released – Affordable 7” Director’s Monitor.Oups, this was not supposed to happen.
These dummy batteries are off-the-shelf and not made by Volta Cinema directly. Several models are available, including D-Tap to Sony FZ100, Sony FW50, Panasonic DMW-BL19e, Sony NP-F (the plate is from Atomos), Micro USB for the Tilta Nucleus, as well as custom ones.In addition, there are multiple exhaust vents all around the monitor, which help with heat dissipation. Talking about heat, I was stunned that the monitor was not warm or hot to the touch even after a couple of hours of being turned on. So that’s a good sign!.
In addition, there are multiple exhaust vents all around the monitor, which help with heat dissipation. Talking about heat, I was stunned that the monitor was not warm or hot to the touch even after a couple of hours of being turned on. So that’s a good sign!.That’s many included accessories for an entry-level/budget monitor and even more than some previous and more expensive options Portkeys has to offer.
First and foremost the Z CAM facebook group is worth mentioning, the spirit of conversation is very good and people from Z CAM as well as visitors are helpful, including the CEO Kinson Loo who answers questions very often himself.The is a 5″ on-camera monitor / live streaming device with decent features: a 400nits touchscreen display with a 1920 x 1080 resolution, one 4K HDMI 2.0 input port, and plenty of monitoring tools all in a very compact package. When I heard about its super low price at $89 (a special CineD price), I had to give it a try to see how it performs. Here are my findings of the most affordable monitor we ever reviewed on CineD!.
Two SWIT compact V-Mount batteries (PB-M98S and PB-M45S).DJI Osmo Action is still a relatively new product and it is the most serious contender to the GoPro. It is a very capable action camera with 4K 60fps video recording and brilliant stabilization. Even better then Hero7 Black’s HyperSmooth – here is our comparison of these two cameras. Make sure to also watch our Osmo Action review.
When looking at the price of this camera, keep in mind though that you have to rig it up with a monitor and audio equipment – see the setup that I used for the sample footage below:.To celebrate our relaunch to CineD, our partner CVP prepared some special deals for our European readers. These include popular cameras from Canon, FUJIFILM, Panasonic, Sony, and Z CAM bundled with useful accessories. (All prices are including VAT).
I would say that it’s a nice and beautiful product that works as advertised, but there is a lot of room for improvements to make the user experience more “reassuring” and enjoyable.Canon EOS 6D Mark II Camera Body with Accessories Kit – $400 Discount.
The PortKeys LEYE electronic viewfinder was first announced back in November 2020. This 4K HDMI-only EVF had a nice and compact form factor (106 x 70 x 78 mm) for a weight of 300g. In addition, the LEYE features a 2.4-inch display with a resolution of 1440 x 900, and can take signals up to 4K at 30 frames per second.The display has a resolution of 1920 x 1080, with a maximum brightness of 1700 nit. Also, it is a touchscreen display to navigate inside the menu.
The pouch that comes with the bag.A good monitor is nothing without great monitoring tools. These tools allow you to judge your exposure, focus, white balance, and so on. This is useful so you can make creative decisions and adjust your camera settings.
The concept of a handle that can power your camera is not new, with products like the Soonwell PH70. However, I’m not too fond of products that have built-in batteries. It means that once you run out of battery, you have no way to pop a fresh battery pack and continue shooting. It’s a no-go for me in professional shooting conditions. As you can see, the P6 is fully packed with all the essential tools. The only drawback of PortKeys’ monitors is the user interface, which is not the most intuitive near beautiful out there, but it gets the job done.
B&H Buy link: Canon EOS 77D Camera Body with Accessories Kit Was: $799.00 Now: $549.00 (Savings: $250.00).The first bundle includes the full-frame mirrorless camera from Panasonic – the LUMIX S1 (our Review, our Lab Test). With its 24.2MP sensor, the camera can record up to 4K 60P cropped or 4K 30P uncropped video. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO. It even became our camera of the year in 2019. The bundle further includes the Sigma MC-21 adapter and Sony 120GB XQD G-Series memory card.
The number of software features included is impressive. Unlike the Gratical X for example, all software features are included for free, and the PortKeys OEYE-3G EVF firmware can be upgraded through the USB port. These features include:.Regarding power, the BM5 uses a single Sony NP-F style battery. Like the SmallHD Focus monitor, you can use the power output of the BM5 to feed your camera via a dummy battery. On top of that, you have the option to power the monitor with an external battery by using the Lemo port on the monitor, and the included Lemo to D-Tap cable.
Today’s post is the first out of three and it features only cameras, drones, FilmConvert, and MZed.Now PortKeys is introducing a brand new solution to the EVF market called the OEYE-3G EVF.
In short, blacks are not black anymore, but more on the grey side, and the picture starts to be a little washed out. On the , even if it has a “low” maximum brightness of only 400nit, you can see that the image shifts quite a lot when the backlight is at 100%.PortKeys LH5H Released – Affordable 5″ Monitor That Can Control Your Camera.
Canon’s full-frame DSLR flagship 5D Mark IV offers interesting price tag and free accessories in kit on B&H (spare battery, memory card, bag, and optics cleaning kit). USB cables: a mini-USB to USB-C cable, and a mini-USB to Lanc camera control cable. When you purchase the LH5P, you have the option to buy additional camera control cables.
Make sure to check our hands-on and footage article as well as Philip Bloom’s two hour in-depth review of the camera. This bundle will get you the camcorder body with Sony 120GB XQD G-Series memory card and a spare Sony BP-U60 56Wh battery (another battery ships with the camera already).Also, it is a WLED display, and the panel itself is 10-bit (8+2 FRC), so not “true” 10-bit, even if very few monitors are real 10-bit.
What and who are we looking for?.The loupe of the LEYE II features a +8 to -3 diopters adjustment.
The Volta Kit is available now and includes the top handle, two batteries, a battery charger, and a NATO rail for €140.00. The monitor mount will cost you an additional €40.00. You can purchase an extra pack of Volta36 batteries for €50.00.Canon EOS R Camera Body with Accessories Kit – $500 Discount.
Once you short press the power button, the monitor takes around five seconds to boot up until it is operational, which is pleasant.Change your aperture, ISO, shutter, white balance settings.
proficiency in filmmaking – you know your stuff in one or more areas of filmmaking (producing, editing, directing, cinematography, post-production …).You are limited to a single 7-24V Lemo port for power and some may miss having a battery option. After a quick run-through the menu/UI seems especially intuitive and the peaking seemed great.
However, they also closed the door on other monitors who might want access to the latest features from Teradek. BlackMagic, Atomos, PortKeys, and others will have to find their own solutions. I used the Volta Cinema Top Handle during seven full productions days, it held all its promises, and it’s been a joy to use. It’s a nine out of ten usability score for me, because the one thing that I am missing is a battery indicator on the handle to see the battery state with a push of a button.
I was also pleased to find a printed user manual (finally!) with everything you need to know to get started and navigate through the menus.The Z Cam E2C Cinema Camera (photo by Z CAM).
I would have preferred longer threadings with a full turn or even a bit more. That way, it would avoid possible loosening problems, even if it didn’t happen to me during the making of this review.The LEYE SDI will retail for $549/€500. It is already listed on our partners’ websites B&H and CVP, so it should be available very soon!.
The Portkeys PT5 is a 5″ monitor with one HDMI input and one HDMI output port. Having HDMI loop-through is pretty impressive on a monitor at that price level. Both in and out ports support resolutions up to 4K DCI at 24p, 4K UHD at up to 30p, FullHD at up to 60p. Display, video signals and monitoring functions.
The headphone volume output, image flip, OSD language/transparency.RED Komodo Update – First Cameras Shipped, Footage Samples, Accessories.
Left side: one HDMI input port, one USB port, a 3.5mm headphone jack, and a 7-24V DC input port with a barrel connector.If you already have a PortKeys monitor – including the BM5, BM5 II, HH7, HS7T, OEYE-3G – the company just released several firmware updates on its website. Here are the firmware update details:.
As you can tell, even my iPhone 11 is more significant than this monitor! Indeed, the Portkeys PT5 has dimensions of only 136 x 72 x 17mm for a weight of 130g/0.28lbs. I was shocked at how light it is when I took the PT5 out of the box; it weighs almost nothing, mainly because the casing is made of ABS plastic.To make it short, all you have to do is purchase the right cable for your camera with the monitor – also available separately – and plug it from the LH5H to the camera. Then, you’ll be able to trigger the recording, navigate through the menus of the camera, change your settings, and so on.
Now Z CAM is introducing three new cameras. The E2 S6 (Super-35 6K camera with a choice of MFT, EF or PL mounts) and two full frame models, with 6K and 8K sensors. (E2 F6 and E2 F8 with a choice of EF and PL mounts).FEELWORLD F7 PRO Released – Affordable 7” Director’s Monitor.
PortKeys BM5 – A Field Monitor That Can Control Your Camera.On the Portkeys PT5, there are one HDMI input port and one HDMI output port. The monitor supports a maximum input resolution of DCI 4K at 24p, 4K UHD at up to 30p, and FullHD at up to 60p. I tested all three with a Canon EOS R and a Canon EOS C70 and did not have any issues, may it be on the input or output side.
But best of all, if you get a pair the Teradek 4K Monitor Modules (one TX and at least one RX) and an ARRI camera (available now) or a RED camera (software update coming soon), you will be able to fully control the camera from your wireless monitor. This is a huge win for high-end drone pilots, shooters in remote locations, or DPs who just wants to drop their ISO or change ND from video village.Once you short press the power button, the monitor takes around five seconds to boot up until it is operational, which is pleasant.
Last but not least, the bag comes with a 5-year warranty. You’ll need to register and activate your warranty on Manfrotto’s website. The company’s customer service is incredible, and you can trust their warranty.If your lens is compatible, you can zoom and focus via the handle.
To me, being able to control the camera using a field monitor (like a RED Touch for example) is a big thing. If I can get a bigger monitor to mount on a Canon C200 or Sony FS5 and still be able to control the camera like the standard little screen, it’s a go-to.But, you’ll have to handle all that extra tripod weight on your back, the unbalance, and the Flexloader L will flip over when you put it on the ground. Also, it’s not very practical to access the bag’s camera compartment.
Home
Community
☰
