It is already compatible with the Z Cam E2, Sony/Canon/Panasonic cameras. But, PortKeys just introduced a new Bluetooth Module that pushes the capabilities of the BM5 a little further.
An 8+2 FRC panel is less expensive for manufacturers to produce, as it’s based on a “software trick” to simulate 10-bit on an 8-bit panel. I’m simplifying things here, but keep in mind that even some of the most expensive monitors from SmallHD or Atomos (except NEON) use the same technique.
Regarding power, the BM5 uses a single Sony NP-F style battery. Like the SmallHD Focus monitor, you can use the power output of the BM5 to feed your camera via a dummy battery. On top of that, you have the option to power the monitor with an external battery by using the Lemo port on the monitor, and the included Lemo to D-Tap cable.
To make it short, all you have to do is purchase the right cable for your camera with the monitor – also available separately – and plug it from the LH5H to the camera. Then, you’ll be able to trigger the recording, navigate through the menus of the camera, change your settings, and so on.
To celebrate our relaunch to CineD, our partner CVP prepared some special deals for our European readers. These include popular cameras from Canon, FUJIFILM, Panasonic, Sony, and Z CAM bundled with useful accessories. (All prices are including VAT).
The list of built-in monitoring tools is quite impressive and includes 3D LUT monitoring, waveform/false color/zebra, peaking and zooming, HDR support, and framing guides/grids/aspects.
If you remove the pouch that comes with the bag, you can put a monitor – in this picture, the PortKeys PT5 that I reviewed here – and some SSD hard drives.
The PortKeys LH5P is a 5.5″ monitor that came out in January 2021. This 1700nit monitor features an HDMI input and an HDMI output port, and it supports resolutions up to 4K DCI. With a very aggressive price tag under $400, this small on-camera display can even control your camera wired or wirelessly. Let’s take a closer look at it!.
You can adjust the scale/position/settings of each tool via the touchscreen. However, you have to press the monitoring tool you want to change for a second and slide it to the side. I have to admit that this manoeuver is sometimes tricky, and it takes some time to get used to.
A monitor of this size and weight makes a lot of sense to use with a small and lightweight battery, like a Canon LP-E6 pack, which is around 50 grams. Indeed, for example, a Sony NP-F 970 battery is 350g, which is twice the monitor’s weight; it looks a bit ridiculous. Also, Canon LP-E6 batteries are the same I use to power my Canon EOS R. I only have to use and carry one type of battery on set.
I tried the Manfrotto PRO Light Flexloader L in two primary configurations: a “traditional” camera bag and a multipurpose backpack.
You’ll find a cold-shoe mount at the bottom of the monitor mount with a 1/4 “-20 threaded hole. The hex key is used to adjust the tension/friction of the tilt axis.
As I mentioned previously, you can navigate inside the UI via the touchscreen or the physical buttons. But, you can also turn off the touchscreen by long-pressing the power button. It’s nice to have that option if you want to avoid fingerprints on your display!.
However, the resolution of the LH5H is FullHD 1920 x 1080, and it can take 4K HDMI signals. In front of the screen, they use tempered glass to protect the monitor from scratches and the harshness of set life.
The battery charger has a micro-USB port, and I was a bit surprised that no charging cable was included. I reached to the company that told me:.
In short, at least on paper, it seems like the LH5H comes with all the tools you need to correctly judge the exposure of your image and frame your shots correctly.
EOS R’s smaller brother – the EOS RP – is now also on sale during Black friday. As a bonus within this accessory kit on B&H you will get a SanDisk 32GB SDHC memory card, and a shoulder bag.
This cover also features all the mounting points: a built-in NATO rail and three 1/4″-20 mounting points with ARRI locking pins.
The OEYE-3G EVF is upgradable through a USB port and includes many free software features right out of the gate such as:.
There are many 5″ on-camera monitors available on the market, with different price ranges depending on features you need/want. So I decided to compare the Porkeys PT5 ($169) to the Atomos Shinobi that retails for a $299 price tag ($130 more expensive) and the FeelWorld F5 that is $149.
In a nutshell, the top handle can support most DSLR and mirrorless cameras, as well as cinema cameras, including the BMPCC 4K/6K, the RED KOMODO, and up to an ARRI Alexa Mini, which is impressive. Also, it should support most on-camera monitors and camera accessories, as long as they stay within the 7.2V/5A limit.
As Phil Holland wrote, aside from REDCODE RAW files, the camera can also shoot ProRes MOV files for quick turnaround. They are available in HQ and 422 for both 4K and 2K resolutions. According to Phil, the camera can’t record both at the same time.
Did you like that review of the ? What do you think about one of the most affordable products on the market right now? Do you want to learn more about a camera monitor and want us to review it? Don’t hesitate to let us know in the comments below!.
Panasonic sells the same camera as G85 in the USa and G80 in Europe, so don’t get confused. This set with the LUMIX 12-60mm f/3.5-5.6mm lens offers great value for the price. B&H offers free accessories (spare battery, memory card, and camera bag) with the purchase. CVP offers free LUMIX 25mm f/1.7 lens (!), and free 3-year Panasonic LUMIX warranty.
The user interface of the PortKeys LH5P is not its most significant strength, to say the least. When I purchase or review a product, I never read instructions (like most filmmakers, I am assuming), which means a product must be intuitive. I think you should be able to give a monitor to any camera assistant and everybody must be able to make it work without reading a book. That is not the case with the LH5P.
Canon’s full-frame DSLR flagship 5D Mark IV offers interesting price tag and free accessories in kit on B&H (spare battery, memory card, bag, and optics cleaning kit).
Bottom: there is one camera control mini-USB port, a 5-pin motor camera control port that doubles up as a DC 7-24V power output port, one 1/4-20” mounting point with locating pins, and a USB Type-A port to update the firmware of the LH5P, load your LUTs, or power it.
You got it; the LEYE II is a pretty decent electronic viewfinder that now features a built-in Canon LP-E6 battery plate at the back of the unit. Unfortunately, there is no indication about the battery life from PortKeys.
The Volta Kit is available now and includes the top handle, two batteries, a battery charger, and a NATO rail for €140.00. The monitor mount will cost you an additional €40.00. You can purchase an extra pack of Volta36 batteries for €50.00.
The Manfrotto PRO Light Flexloader L is one of the biggest carry-on camera backpacks available on the market. In this review, we’ll take a look at the bag’s build quality, features, and how much gear it can hold. If you’re looking for one of the best solutions money can buy, let’s take a closer look at the Flexloader L!.
I am left a bit puzzled about possible use cases for this cam – by its very name it implies the use as a cinema camera which I definitely cannot recommend because of the mentioned extreme rolling shutter and the limited dynamic range.
However, on-camera monitors are not your traditional computer display. Most of the time, you can’t use a probe or spectrophotometer to adjust your on-camera monitor.
What I always liked about the micro four thirds format is the possibility to adapt almost any lens, including the option to use a speed booster (0.71x). The speed booster allows the use of Canon EF glass for example, while at the same time increasing the light sensitivity by one stop.
We first reported about their Portkeys BM5 monitor in 2019, a 5-inch field monitor with SDI/HDMI input and output ports capable of controlling your camera. The company released an upgraded version, the PortKeys BM5 III WR, that boasts a bigger screen and a couple of new features.
Let’s make it simple here; the PortKeys LEYE II has its predecessor’s same features and specifications. In a nutshell, that includes:.
The sun hood consists of two parts: a plastic sun hood and a mounting bracket—the bracket clips onto the monitor, and the sun hood attached to it via some velcro.
Just like the original F7, the PRO version is packed with the most common monitoring tools to precisely control your image. These tools can be displayed independently or in an all-scopes mode.
If you swipe to the left or right, you can access the System settings page. This page is where you can adjust the display settings, audio output, LUT, firmware update, etc.
Apparently, this design is becoming quite popular. In fact, the new FEELWORLD F7 PRO has a very similar feature, which makes it a good director or 1st AC monitor on a budget. Let’s take a closer look.
On the front of the OEYE-3G, it features an SDI, HDMI and USB input, plus an SDI and HDMI output. The HDMI input can accept signals up to 4K DCI at 24 frames per second, or 4K UHD at 24/25/30 fps. The SDI input is limited to 1080P input up to 60 fps.
The biggest benefit for me is that the Volta Cinema Top Handle removes weight from your rig and keeps it well balanced. Indeed, Sony NP-F batteries at the back of a monitor tend to be clumsy and not heavily enjoyable to shoot with. With this top handle, you feel lighter and gain freedom.
Last but not least, the bag comes with a 5-year warranty. You’ll need to register and activate your warranty on Manfrotto’s website. The company’s customer service is incredible, and you can trust their warranty.
The only thing that prevents it from slipping out of the handle is the battery cap (if it ever moves.) Update: Volta Cinema told us that the monitor mount comes with a small m3 screw in the box, that is used to secure it tightly to the handle, as the monitor mount is not meant to move around in any way.
The first batch of both accessories got sold out relatively quickly, the next batch should be shipping by the end of June.
Just like its more affordable sibling, this camera also suffers from some overheating issues. Take a look at our news post from Canon R5 launch to know more about it. This set includes an extra Canon LP-E6NH battery and Sandisk 512GB 1700MB/s CFexpress memory card.
For example, when a monitor’s colors are wildly inaccurate, it can happen that you see orange when you’re supposed to see yellow or red. It can affect how you set your camera’s white balance or exposure, for example.
According to VIDEOGEAR, the Black Mini draws less than 6W of power. To give you a rough idea, as these results can vary a lot depending on the age/state of your battery pack, I did a quick test with a fresh Canon LP-E6N battery pack (14Wh). I got away with a little more than 3 hours of battery life at the maximum backlight setting. These results are great, and it’s decent battery life for an on-camera monitor powered by a small battery.
The answer is yes. I had no issues at all – the build quality of both monitor and camera is top notch, and there was no overheating of both devices. The monitor has a fan which I turned down to the lowest setting to avoid picking up the sound, so it got very very hot. It still worked reliably.
Also, one thing that I found annoying is that the display catches fingerprints quickly. It means that you need to clean your monitor very often, which can be annoying.
To know more, check our Lab Test as well as Nino’s C300 Mark III review. This bundle will additionally get you a Canon 24-70MM F2.8L II USM EF-Mount lens and SanDisk CFexpress Extreme Pro 512GB memory card.
Home
Community
☰
