write one representative news post about a current subject of your own choosing that you would consider a “perfect fit” for our site (and which we haven’t written about yet). It can be either a classic news post of something current (example here), a review (like here) or a longer educational post (like here). Choosing the right subject and headline is almost as important as the proper content to go with it :-).
In short, you got it, the PortKeys LH5P’s UI is a big step up from the previous archaic one, but I feel like it still needs some refinement and improvements to get it “right.” PortKeys could change this kind of thing via a firmware update, so I have no doubt they’ll put in the extra work to make it a great, easy to use, and pleasing UI.
Once you switch the power button on, the monitor takes around ten seconds until it is operational, which is acceptable.
In essence, you could use your smartphone instead of a monitor if you accept some lag between the recorded and image view.
As you can tell, even my iPhone 11 is more significant than this monitor! Indeed, the Portkeys PT5 has dimensions of only 136 x 72 x 17mm for a weight of 130g/0.28lbs. I was shocked at how light it is when I took the PT5 out of the box; it weighs almost nothing, mainly because the casing is made of ABS plastic.
I got away with around 3 hours of battery life at the maximum backlight setting. To me, this is a decent battery life for an on-camera monitor powered by a small battery. However, if you do the maths, a big Sony NP-F970 battery could theoretically run the PT5 for more than 12 hours!.
However, I think that the Portkeys PT5 is more suited if you’re often shooting inside. For example, during corporate/interview shoots inside, it’s an excellent low-cost option that I had a blast using.
Chinese monitor manufacturer PortKeys just released a new budget-friendly monitoring solution to its lineup: the PortKeys LH5H. If you’re new to PortKeys products, we already reported about their BM5 5″ HDMI & SDI monitor, OEYE-3G EVF, or, more recently, the PortKeys KeyGrip handle. I’ve been using the extremely bright (2200 nits) PortKeys BM5 II for several months now, and it quickly became my go-to on-camera monitor.
Buy link: Panasonic LUMIX S1H Bundle Was: €4,830.89 Now: €4,502.40 (Savings: €328,49).
The PortKeys LEYE is available now for $399. It comes with a right-angle HDMI adapter, a sponge eye mask, a USB thumb drive with the user manual, and a D-Tap to barrel connector cable.
On the night shots, I had to ramp up the ISO to 16000 – I think the results are still OK and usable.
At first, I had a weird feeling as in case of assistance or firmware updates, I guess you are left in the dark with no customer service to contact.
In short, blacks are not black anymore, but more on the grey side, and the picture starts to be a little washed out. On the , even if it has a “low” maximum brightness of only 400nit, you can see that the image shifts quite a lot when the backlight is at 100%.
For more information about the LH5H, you can visit PortKeys’ website here.
Finally, there is a 1/4-20″ mounting thread, and a USB Type-A port to update the firmware of the LH5H, load your LUTs, or power it.
Z Cam E2C cinema camera rigged up with a monitor (Portkeys BM5) and a ZOOM H2 (not visible, behind the monitor) for audio capture via the 3.5mm input.
The BM5 III WR is made from aluminum, and there is a tempered glass in front of the display.
Edit: the Z Cam E2C offers a gigabyte ethernet connection for control and live streaming, but no multicam synchronization as written earlier in this post and mentioned in the video above – sorry for this mistake – I have deleted the respective passages in the text below.
There is also a nice Z CAM smartphone app available for IOS (Android still in a beta release), which connects to the camera’s wifi and allows access / display / change all settings as well as providing a full screen image preview with little latency.
The BM5 is PortKeys’ new 5-inch 1080P flagship field monitor. It features an HDMI and SDI input, and an SDI output with cross-conversion. In case you need to monitor your sound, a 3.5mm output jack is located on the left side. There is a USB port at the bottom of the monitor for future firmware upgrades.
The next bundle includes the newer flagship full-frame mirrorless camera from Panasonic – the LUMIX S1H (our Review, our Lab Test). The camera can record up to 6K 30P or a wide range of 4K modes. It offers nice ergonomics, good IBIS, and relatively clean images with high ISO.
The Portkeys PT5 LH5P features a 5″ WLED display with a FullHD 1080p / 1920 x 1080 resolution. The display is a touchscreen and the only way to navigate inside the menus.
Two little pins inside the handle make the connection between the battery and the D-Tap port. These pins slide back and forth inside the groove when you adjust the handle back and forth.
Add automatic color calibration function: Supported devices Xrite i1DisplayPro.
The R6 is one of Canon’s two newly introduced mirrorless cameras. It is the lower-resolution more-affordable sibling to the Canon R5. It offers internal 4K60p video in 10-bit with no crop and with AF.
DJI Osmo Pocket is the smallest Osmo yet. It combines camera with a 3-axis gimbal and fits literally in the palm. The camera still offers up to 4K 60fps video recording. Make sure to watch and read our DJI Osmo Pocket review for more information.
Yes, that’s right. Even the brand new Sony a7S III is included in this CVP special. The camera is supposed to start shipping in September 2020, but it already caused a lot of excitement.
Finally, the LH5P display is slightly larger at 5.5″ (5.2″ for the LH5H), and it has a new removable Bluetooth antenna at the monitor’s back, whereas the Bluetooth module of the LH5H is built into the monitor.
The HDMI cable is relatively thick, and while I prefer slim cables, VIDEOGEAR at least provides you with a way to connect the monitor to a camera.
The Z CAM E2 is a very compact and lightweight cinema camera that we discovered during NAB 2018. Here is a quick summary of the features and what this small camera is capable of:.
One of the only things that could be improved on the BM5 II that I have is the overall UI, which feels a bit outdated. The new PortKeys LH5H features a new UI that looks much better and more intuitive. On the left and right sides of the monitor, you’ll find various customizable shortcuts to your favorite monitoring tools. The display itself is tactile, so you can activate/disable functions quickly without having to go inside the menu.
And that’s it. It is not an overly-complicated bag with tons of zippers and pockets all over the place. Instead, Manfrotto decided to keep things simple, and it just works perfectly.
Another company that announced some Komodo Accessories is KipperTie. They offer a PL to RF mount adapter with a mounting foot. Additionally, the company offers a mounting bracket called Chinstrap for extra PL mount lens support even without a baseplate.
Last but not least, there is one user-assignable Function button to turn On/Off your favorite tool quickly; that’s great. But, to activate/deactivate all the other non-assigned built-in tools, you always have to go inside the menu, do your thing, let the menu disappear, and so on. It is a bit of a letdown if you’re often switching between different tools, which is a bit of a disappointment and can slow you down.
Overall, the PortKeys HS7T Metal Edition seems to be designed to meet both focus pullers’ and director’s needs, even though it would have been great to see an even brighter 7” option from this company. We’ll probably have to wait a little longer for that. Meanwhile, the PortKeys HS7T Metal Edition is available for purchase on the PortKeys website. Retail price is $399.
From what I saw, it looks like the system is very responsive and not laggy at all. This is good news for all RED Komodo users, who now have another affordable option for wireless camera control via an onboard camera monitor.
To use a Sony NP-F battery, slide it to the right. I already said it for Portkey’s monitor, but I love that battery powering option.
There are two little charging indicators on top of the Volta36 battery charger that goes from red (charging) to green (charged).
System settings page to adjust the display, audio output, LUT, firmware update, and so on.
To charge batteries, all you have to do is slide them into the battery charger. The pins inside the charger will align with the battery connectors, and it’ll start charging. However, the batteries are not locked into place in the charger.
In a nutshell, the top handle can support most DSLR and mirrorless cameras, as well as cinema cameras, including the BMPCC 4K/6K, the RED KOMODO, and up to an ARRI Alexa Mini, which is impressive. Also, it should support most on-camera monitors and camera accessories, as long as they stay within the 7.2V/5A limit.
The new Z CAM E2’s will be available in October 2019. To me, pricing is impressive, for cameras with that many features:.
The fact that the Black Mini is a lightweight on-camera monitor makes it a lovely experience if you’re operating handheld or on a tripod/gimbal. It doesn’t add too much weight nor bulk to your setup, which is nice.
When the monitor is switched on, you can adjust various display settings inside the menu, including:.
you have the time to write regularly – people with full-time jobs should check if they can find the time to write regularly.
Indeed, a great on-camera monitor must be as color accurate as possible and be as close to “what you see is what you get” as possible. If your monitor colors are not correct, you won’t see your footage the way it’s supposed to be. For example, when a monitor’s colors are wildly inaccurate, you can see orange when you’re supposed to see yellow or red. It can affect how you’ll set your camera’s white balance or exposure, for example.
Buy link: Sony FX9 Bundle Was: €12.725,64 Now: €12.401,64 (Savings: €324).
It is powered via a single Sony NP-F style battery, and you can use the power output of the BM5 to feed your camera via a dummy battery. Also, you can power it with an external battery by using the Lemo port on the monitor.
CVP Buy link: Panasonic LUMIX G9 Camera Body Was: €1,100.86 Now: €941.78 (Savings: €159.09, Free accessories, Free 25mm f/1.7 lens, and Free 3-year warranty).
The FX9 is Sony’s new full-frame cinema camera. Announced in September 2019, it offers solid 10-bit internal recording modes, very good autofocus, audio, internal eND, and more.